• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8A
• /
• pp.698-705
• /
• 2012

In this paper, we proposed an autostereoscopic display simulator that calculates an extended intensity distribution of light emitted from respective light sources and reaching respective views in an observing area to an observing plane. It simulates intensity distribution in horizontal and vertical observing ranges from the predetermined observing plane and obtains an optimal viewing area image having quantities of light according to respective views based on the intensity distribution data. As a result of the simulation the proposed system enables guiding viewing comfort zone interactively.

• Journal of Energy Engineering
• /
• v.24 no.1
• /
• pp.24-31
• /
• 2015

The purpose of this study is to provide the thermal comfort range according to the residential style and clothing level at radiant floor heating space, and compare the annual energy consumption and energy cost for each condition. Lower neutral point temperature has been stood for floor sitting style than chair sitting style, which appears that the thermal sensation was affected by local heat transfer between floor surface and the human body. The result of research indicates that neutral point temperature was in inverse proportion with the clothing level. It is interpreted that the increasing of clothing level results decrement of heat loss from human body, and is available to achieve same thermal comfort at lower room temperature. It was analyzed that the floor sitting style is more economical residential style than the chair sitting style, because the energy consumption of the floor sitting style is saved by 6.0% in average to compare with that of the chair sitting style. It is analyzed that energy consumption has been decreased by 13.5% with the clothing level of 1.2 Clo than with that of 1.0 Clo, and decreased by 18.0% than with that of 0.8 Clo, which explains that the energy saving can be achieved with the variation in life habit to increase the clothing level.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.8
• /
• pp.1275-1287
• /
• 2006

This was to confirm the Web-SFAS and street Fashion trend 2005. Korea women's street fashion in 2005 S/S was analyzed by using the Web-SFAS(Street Fashion Analysis System) that was developed and completed in the earlier research. Total 270 women who were sensitive to the fashion were surveyed around in 5 nationwide cities and 9 commercial zones. The analysis results of the questionnaire and image survey in 2005 S/S for each commercial zone is shown as follows: 1. The sequence of care with most interest in producing fashionable shape is in the order of clothes>accessory>hair style>make up>shoes, and it was found that the proper reason for visiting the commercial zone is to meet with friends than shopping. 2. Most preferred item for tops were shirts and T-shirts, while for bottoms were blue jeans of denim material in various colors and designs. The color had the clear winner in white color with the pink or yellow line of colors preferred in all commercial zones. The blue jeans and skirt items were the most dominant with the preference on the blue color. The color and image were diversely favored with light, natural, modern, elegance and warm images. 3. The semi-formal image was preferred in women's street fashion, 2005 S/S in Apgujeong-dong, Hapseong-dong, Myeong-dong, Hongik University area, Dongseong-ro, and the active comfort casual image was preferred by womens in Seo-myeon, Nampo-dong and Sangnam-dong. However the retro image were represented in Daehak-ro specially. The tendency of street fashion for women had the difference of their own trends for each commercial zone, rather then the regional differences for each city with the conspicuous preference of color for the items.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.11 s.158
• /
• pp.1519-1530
• /
• 2006

This study has surveyed and analyzed in 2005 S/S domestic men's street fashion by using the Web-SFAS system that was developed and completed in the earlier research. Total of 270 men who were sensitive to fashion were surveyed around 5 nationwide cities and 9 commercial zones. The analysis results of the questionnaire and image survey in 2005 S/S for each commercial zone was shown as follows. 1. The most interest in producing fashionable shape when they go out was in the order of clothes>hair style>shoes and it was found that the proper reason for visiting the commercial zone was to meet with friends>watching movies>shopping etc. 2. T-shirts were most preferred as upper garments and as for bottoms, blue jeans were preferred. Black, gray, and white colors were most preferred and blue color was most preferred primarily due to the preference for blue jeans. The color image was proven mainly modem and light tone, comfortable and casual items were preferred. An active comfort casual image emphasized with activeness by coordinating comfortable T-shirts or shirts with blue jeans were most preferred in 9 areas. 3. A clear difference was confirmed in color by commercial area. Blackish color was most prevalent in Daehakro whereas simple color was mostly shown around Hongik University area. Bright and unique colors such as green and violate were dominant at Dae-Gu Dongseongro, and basic colors such as white and black were preferred in Masan Hapseong-dong and Changwon Sangnam-dong. Through the results of nationwide street fashion survey, the each commercial zone has unique characteristics in fashion trend even in the same city, rather than the regional difference in Seoul and local city.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.8
• /
• pp.1124-1131
• /
• 2011

This study performed the prediction about the indoor contaminant's diffusion characteristics which can be affected by the mechanical ventilation system on a training ship. The results are as followings. It is clear that the contaminants are spread to most of the indoors, regardless of the contamination beginning zone. About 65~100 minutes later, the contaminant densities of whole indoor zones are evaluated as clean. Comparing the contamination beginning zone being located at higher deck(scenario A) to the contamination beginning zone being located at lower deck(scenario B), although the contaminant density by scenario A is 10 times higher than that by scenario B, the number of contaminated zones are 50% less. The contaminant densities are evaluated as to be rapidly decreased when the outside air induction ratio against design volume is over 75%.

• The Journal of Korean Academy of Prosthodontics
• /
• v.32 no.2
• /
• pp.268-280
• /
• 1994

Tissue conditioners have been used for treatment of denture stomatitis caused by wearing of dentures. Early studies pointed out Candide albicans (C. albicans) as main etiologic factor, and antifugal agents were added for control of the species. But there is a little information about broad comparison on the effect of tissue conditioners and antifungal agents added. The purpose of the present study was to compare the inhibiting effect of four tissue conditioners and one temporary soft liner on the growth of C. albicans for treatment of denture stomatitis using gel diffusion method by measuring diameter of the zone of growth inhibition. Three antifungal agents were added to each material for evaluation of the effect of added agents. Finally, observation was made to evaluate the effect of the loss of antifungal elements by aging of the specimen. The results of this study were obtained as follows : 1. Tempo had remarkable antifungal effect showing the zone of growth inhibition as 2.35 mm at 1st day, and was most effective on End: 4th and 7th day from incubation (p<0.05). But Coecomfort, Dura conditioner, Visco-gel, Coe-soft had little antifungal effect from the 1st day of incubation. 2. Nystatin was most effective showing 9.60-12.04 mm of zone of inhibition at the 1st day from incubation. The antifungal properties were reduced to amphotericin B, chlorhexidine and materials without agent (p<0.05), and the effect was diminished by time. 3. As pretreatment with amphotericin B, nystatin, chlorhexidine, Tempo was very effective at the 1st day from incubation showing zone of inhibition as 3.65, 12.04, 4.78 mm with addition of each agent. Dura conditioner had strongest antifungal effect at the next day as 2.86, 5.33, 1.29 mm of zone of inhibition, and yielding results of Coe-comfort, Tempo, Coe-soft was shown at 4th and 7th day from incubation (p<0.05). Taken all together, tissue conditioners have little antifungal effect except Tempo. Formation of the zone of growth inhibition was due to agents amphotericin B, nystatin, chlorhexidine and nystatin was most effective. Conclusively, it is advisable to select material which is effective on the growth of C. albican and consider addition of antifungal agents for treatment of denture stomatitis.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.3
• /
• pp.293-300
• /
• 1999

The purpose of this study was to evaluate the in vitro antifungal effect of several kinds of denture lining materials containing nystatin and silver-zeolite on Candida albicans. Three commercially available tissue conditioners (Soft-Liner, Coe-Comfort, Coe-Soft) and two direct denture relining materials (Tokuso Rebase, Durabase) were selected. In terms of the zone of inhibition and some basic physical properties, I could find the following results ; 1. Nystatin or silver-zeolite included in those relining materials had definite antifungal activities against the Candida albicans. 2. As times went on, both of the antifungal agents's activities decreased gradually. 3. Antifungal agents did not affect the relining materials' basic physical properties. 4 Direct chairside relining materials showed unfavorable dark discoloration with response to silver-zeolite.

• Journal of the Korean Home Economics Association
• /
• v.31 no.3
• /
• pp.213-222
• /
• 1993

The purpose of this study was to investigate the present conditions of thermal environment in small-size apartments. The research methods used were measuring of environmental elements and personal self-administration for the residents' thermal comfort responses. The house subjected were 25 peung apartments facing southeast and southwest directions. The results of this study were summarized as follow ; The indoor temperature and humidity of houses subjected were 25.0∼27.3℃, 37.1∼42.5%. Compared with the distribution of indoor temperature and globe temperature of houses subjected, those of southeast house were more stable. And in the residents' thermal sensation responses, the residents of southeast houses checked more often neutral zone. Therefore the thermal environment of southeast houses were more comfortable condition than southwest houses.

• Journal of Environmental Science International
• /
• v.14 no.12
• /
• pp.1081-1085
• /
• 2005

This study is carried out for obtaining the basic materials for presentation of creation and desirable management of urban roadside trees through analyse the existence effect of trees on people who operate th commercial areas along the streets. Roadside tree and green areas are recognized comfort space in addition to simple planting area. Therefore various trees and flowering plants should be introduced in addition to roadside facilities for convenience. Planted roadside trees should be maintained. We will propose an method that residents plant and manage the trees and flowering plants on the two lane of one way road. However main lines more than four lane of one way have more public property beside the residents space. Therefore these should be maintained mainly by related government agencies.

• Transactions on Electrical and Electronic Materials
• /
• v.11 no.3
• /
• pp.106-111
• /
• 2010

The convergence of significantly different and disparate technologies such as spintronics, carbon nano tube field effect transistors, photon and bio-responsive molecular switches, memristor and memristive systems and metamaterials, coupled with energy scavenging sources are gaining a renewed focus in the quest for new products. This paper will provide an insight into an anticipated technological revolution and will highlight a futuristic Roadmap to capture opportunities that are brought about as the results of formulation of new circuit components basically driven by emergence of nanoscale materials as part of System on System integration. Challenges as the result of new lumped components such as memristor, metamaterial-based lumped components and the like that will challenge the designers' comfort zone will also be discussed.