• 한국조경학회지
• /
• 제21권1호
• /
• pp.125-137
• /
• 1993

Ansan urban nature park is 197.8ha and located in Seodeamun-Gu of Seoul. Flora of Ansan consisted of 141 species, 76 genera, 40 families in woody plants. This study was conducted to analyze the natural environment and establish the park management plan with ecological approach. The result of this study is summarized as follows. 1. The short term plan shall be performed in six vegetation management zones; Robinia pseudoacacia community zone, Sorbus alnifolia community zone, Quercus acutissima community zone, Populus ${\times}$albagrandulosa community zone, Pinus densiflora community zone, and landscape planting zone. Pinus densiflora and landscape planting zones shall be managed artificially, the others managed with ecological approach. 2. The long term plan shall be performed in four vegetation management zones; Robinia pseudoacacia community zone, Quercus spp. community zone, Pinus densiflora community zone, and landscape planting zone. Pinus densiflora and landscape planting zones shall be managed artificially, the others managed with ecological approach. 3. Because soil of Ansan is acidified and the soil disturbed growth of plants, the improvement of soil is necessary. The fertilization shall be performed in three zones; evergreen confierous tree zone(ex. P. densiflora), Quercus spp. zone, and the other deciduous tree zone(ex. R. pseudoacacia).

• Ocean and Polar Research
• /
• 제40권2호
• /
• pp.69-75
• /
• 2018

We investigated the effects of environmental variations on the growth and survival rate of Stichopus japonicus to determine the optimum environmental conditions for its growth. Literature studies and a 12 month-long diver survey were carried out to understand the habitat, ecology and size of the surveyed area. Based on the collected data, we suggested optimum habitat conditions for releasing S. japonicus. Experiments on releasing S. japonicus were conducted in the breakwater of the Hwagye fishing cooperative in Hwagey-ri, Namhae-un, Gyeongsangnam-do, Korea. To implement the experiments, we divided the surveyed area into 4 sub-areas with different characteristics: (1) sand and silt zone; (2) artificial sea cucumber bank zone; (3) artificial rock bank zone; and (4) marine algae zone. The experiment lasted for 12 months. We released 32,000 sea cucumbers over $120m^2$ of each of the sand and silt zone, artificial rock bank zone and marine algae zone and released 6,000 sea cucumbers over $120m^2$ of the artificial sea cucumber bank zone. The average density of the released sea cucumbers from day 30 to day 360 after the releasing was conducted was the highest in the artificial sea cucumber bank zone ($23.7animal/m^2$), which was followed by artificial rock bank zone ($2.0animal/m^2$), marine algae zone ($1.9animal/m^2$) and sand and silt zone ($0.8animal/m^2$). The analysis on growth showed that the initial average weight of 2.3 g increased on day 360 after the releasing to 12.5 g in the artificial sea cucumber rank zone, 20.2 g in the sand and silt zone, 23.3 g in the artificial rock bank zone and 22.9 g in the marine algae zone. Results from the experiment along with the literature analysis suggest the following optimum habitat conditions: $10-15^{\circ}C$ water temperature; 28-34 psu salinity; 5-10 m water depth; 0.2-0.5 m/s velocity; rock, stone and muddy sand as substrate; and less than 20% mud in the substrate.

• 한국해안해양공학회지
• /
• 제18권3호
• /
• pp.241-250
• /
• 2006

39개 동해 해수욕장에 대한 대표 입경과 유영폭, 포말대 경사 등을 조사하였다. 이 자료를 근거로 입경과 포말대 경사의 상관 관계를 살폈으며 해수욕장의 유영폭을 추정하는 데 있어 어떤 인자의 영향력이 더 큰가를 분석하였다. 분석 결과 대상 해수욕장에서는 유영폭과 대표입경의 상관성이 더 우월하며 유영폭이 대표입경의 1.15승에 반비례하는 결과를 얻을 수 있었다. 분석하는 데 있어 해빈 종단면 $h=Ay^{2/3}$ 식이 사용되었으며 해빈 종단면 축척 계수 A는 대표입경의 0.77승에 비례하는 것으로 분석되었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제2권3호
• /
• pp.507-508
• /
• 1989

• 한국강구조학회 논문집
• /
• 제9권4호통권33호
• /
• pp.683-695
• /
• 1997

본 연구는 강제 라멘교각 접합부 panel zone의 전단거동특성에 대하여 검토한 것이다. 여기에서는 접합부 시험체 20개에 대한 재하실험 결과와 3가지의 FEM해석 모델에 대한 결과를 제시 하였다. 이와같은 실험및 해석결과를 비교 검토한 결과, panel zone의 강도와 변형 성능은 단면적비와 전단좌굴등에 의하여 감소하는 경향을 보이고 있음을 알 수 있었다. 따라서 본 연구에서는 이상의 결과를 기초로 panel zone의 강도와 변형성능에 대한 새로운 평가식을 제안하였으며, 또한 기존의 라멘교각 접합부에 대한 변형성능에 관해서 검토하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.427-432
• /
• 2003

In contact-type multiview 3 dimensional imaging systems, the optimum design parameters are not easily found because of difficulty in determining the size of viewing zone. Two factors related with the viewing zone, such as different view image patching and the widths of the viewing regions are discussed to explain the difficulty.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.81-86
• /
• 1999

The installation of vertical drains by means of a mandrel causes significant remolding of the subsoil, especially in the immediate vicinity of the mandrel. Thus, a zone of smear will be developed with reduced permeability and increased compressibility. This paper is mainly concerned with a field study to investigate the effect of smear due to vertical drain installation. In the present study, a field smear test was conducted to assess the extent of the smear zone around the vertical drain. The extent of the smear zone around a vertical drain was evaluated from the CPT results. CPT test was carried out to some distance around the mandrel installation. The test results revealed that a smear zone was estimated to be 3.6~5.3 times of the mandrel diameter.

• 한국방사선학회논문지
• /
• 제4권3호
• /
• pp.27-31
• /
• 2010

엑스선 영상의 공간분해능은 영상획득 장치에 사용되는 광학소자의 성능에 의해 결정된다. 8.5keV에서 높은 공간분해능 달성이 가능한 존 플레이트를 설계하였다. 방사광을 이용하는 대신 엑스선 튜브를 사용하는 영상시스템에서는 80nm의 공간분해능을 달성할 수 있음을 광선추적 기법을 이용하여 예측하였다. 전자빔 석판인쇄술을 이용하여 최외곽 폭 40nm를 갖는 존 플레이트가 제작하였다.

• Advances in aircraft and spacecraft science
• /
• 제1권2호
• /
• pp.177-196
• /
• 2014

A theoretical exploration for determining the characteristic length of the cohesive zone for a double cantilever beam (DCB) specimen under mode I loading was conducted. Two traction-separation laws were studied: (i) a law with only a linear elastic stage from zero to full traction strength; and (ii) a bilinear traction law illustrating a progressive softening stage. Two analytical solutions were derived for the first law, which fit well into two existing solution groups. A transcendental equation was derived for the bilinear traction law, and a graphical method was presented to identify the resultant cohesive zone length. The study using the bilinear traction law enabled the theoretical investigation of the individual effects of cohesive law parameters (i.e., strength, stiffness, and fracture energy) on the cohesive zone length. Correlations between the theoretical and finite element (FE) results were assessed. Effects of traction law parameters on the cohesive zone length were discussed.

• Journal of Welding and Joining
• /
• 제30권3호
• /
• pp.51-56
• /
• 2012

Different microstructures in the weld zone of a metal structure including a fusion zone and heat affected zone are formed as compared to the base material. Thus, the mechanical properties in the weld zone are different from those in the base material. As the basic data for reliably understanding the structural characteristics of welded nuclear material, the mechanical properties in the weld zone and base material for a Zircaloy-4 strap and Hastelloy${(R)}$-X alloy strap are measured using an instrumented indentation technique (IIT) in this study.