• 한국표면공학회지
• /
• 제34권4호
• /
• pp.313-320
• /
• 2001

It is well known that the amount of hot-dip Zn coated sheet steels used for automotive is rapidly increasing. As hot-dip steel sheets show good corrosion resistance and excellent formability, the demand for outer panel of automotive has been increased in order to satisfy with the requirement of high surface qualify. There are many kinds of factors influencing on the surface quality and the dross control in the galvanising bath is regarded as one of the most important thing. In this study the characteristic and growing behavior of dross in the galvanizing bath were investigated and the effect of dross on the surface defect of GA was surveyed. The dross defects on the GA sheet steels result from bottom dross whose diameter are larger 50$\mu\textrm{m}$ in the Zn pot. Dross-free state exist for about 30 hours from starting time of GA production.

• 한국표면공학회지
• /
• 제32권1호
• /
• pp.31-42
• /
• 1999

The effect was investigated that aluminium in the zinc bath has on the coating adhesion of Hot-rolled Galvanized Iron(HGI) manufactured without pickling process. It is thought that the coating adhesion of HGI manufactured without pickling process is good due to the fact that increasing aluminium content in the zinc bath makes zinc and aluminium diffuse to the cracks or pores in the scale formed through the reduction heat treatment, and Fe-Zn-Al compound with good ductility is formed in the scale layer and plays a role of anchor between zinc coating and substrate. It is possible that HGI with the good coating adhesion was produced without pickling treatment in the zinc bath with more that 3wt% of Al content even at the $550^{\circ}C$ of conventional reduction heating temperature. In creasing the temperature of heating section and aluminium content in the zinc bath prevents the Zn-Fe alloy. The corrosion resistance of HGI manufactured without pickling process is excellent because of the mixed reaction of zinc sacrifice and aluminium passivity film.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.89-90
• /
• 2022

Arc metal spraying is a widely used method for improving the performance of construction structures such as corrosion resistance and electromagnetic wave shielding. However, when arc metal spraying is applied to a concrete structure, adhesion performance may deteriorate. Therefore, the effect of each surface treatment method on the physical properties between the arc metal spray coating and concrete was reviewed by evaluating the deposition efficiency and adhesion performance according to the arc metal spray surface treatment method (surface reinforcing agent, roughening agent, and sealing agent). As a result, it is suggested as an optimal surface treatment condition to induce non-interface failure by using a roughening agent and to improve the properties of concrete and metal coatings by applying a surface reinforcing agent and sealing agent.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2015년도 추계학술대회 논문집
• /
• pp.163-163
• /
• 2015

아연(Zn)을 대체할 수 있는 물질계 인 알루미늄(Al)과 마그네슘(Mg)을 본 연구에서는 In-Line PVD 장치의 스퍼터링 소스를 이용하여 냉연강판 위에 코팅하고 열처리를 실시하여 전자현미경 및 글로우방전 분광기를 이용한 코팅층의 특성 분석 및 염수분무시험을 통해 내식성을 평가하였다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2014년도 추계학술대회 논문집
• /
• pp.22-22
• /
• 2014

아연(Zn)을 대체할 수 있는 물질계 인 알루미늄(Al)과 마그네슘(Mg)을 본 연구에서는 전자빔 증착을 이용하여 냉연 강판 위에 다층으로 코팅하고 열처리를 실시하여 전자현미경 및 글로우방전 분광기를 이용한 코팅층의 특성 분석 및 염수 분무시험을 통해 내식성을 평가하였다.

• 한국해양학회지:바다
• /
• 제25권2호
• /
• pp.42-53
• /
• 2020

본 연구에서는 광양만 유역 국가산업단지와 컨테이너 부두 유역의 입자크기별 도로축적퇴적물(Road-deposited sediments; RDS)과 해양퇴적물 내 중금속 오염현황 파악과 잠재적인 오염원으로써의 RDS의 영향을 연구하였다. RDS의 경우 아연(Zn)의 농도가 2,982 mg/kg으로 매우 높았으며, 크롬(Cr)>니켈(Ni)>납(Pb)>구리(Cu)>비소(As)>카드뮴(Cd)>수은(Hg)의 순이었다. RDS의 중금속 농도는 입자가 세립할수록 증가하였으며, 금속폐기물을 취급하는 산업시설 주변에서 상대적으로 높은 농도를 보였다. 125 ㎛ 미만의 입자에서 아연(Zn)이 가장 높은 오염도(very high enrichment)를 나타냈고, Cr, Cd, Pb은 심각한 수준의 오염도(significant enrichment)를 보였다. 한편, 해양퇴적물 내 중금속 농도는 대부분 국내 "주의 기준(threshold effect level, TEL)" 이하였으나, 2010년 이후 Zn의 평균농도가 30~40% 증가하였다. 연구지역 도로노면 내 Zn, Cd, Pb 등은 강우시 쉽게 비점오염의 형태로 유출가능한 125 ㎛ 미만이 전체의 54%를 차지하는 것으로 나타났다. 특히 아연(Zn)의 경우, 연구지역의 교통 뿐만 아니라 산업활동에 사용된 아연도금의 부식에 의한 영향을 크게 받는 것으로 판단된다. 중금속 농도가 높은 세립한 RDS는 바람, 차량이동에 의해 재비산되어 대기 뿐만 아니라 강우시 인근 환경에 크게 영향을 미칠 수 있기 때문에 주변 환경 및 생태계에 미치는 영향에 대한 추가적인 연구가 필요하다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.158-158
• /
• 2017

Titanium and its alloys have been used in the field dental and orthopedic implants because of their excellent mechanical properties and biocompatibility. Despite these attractive properties, their passive films were somewhat bioinert in nature so that sufficient adhesion of bone cells to implant surface was delayed after surgical treatment. Recently, plasma electrolyte oxidation (PEO) of titanium metal has attracted a great deal of attention is a comparatively convenient and effective technique and good adhesion to substrates and it enhances wear and corrosion resistances and produces thick, hard, and strong oxide coatings. Silicon(Si), Zinc(Zn), and Manganese(Mn) have a beneficial effect on bone. Si in particular has been found to be essential for normal bone and cartilage growth and development. And, Zn has been shown to be responsible for variations in body weight, bone length and bone biomechanical properties. Also, Mn influences regulation of bone remodeling because its low content in body is connected with the rise of the concentration of calcium, phosphates and phosphatase out of cells. The objective of this work was research on bone-like apatite morphology on Si-Zn-Mn-hydroxyapatite coating on Ti-6Al-4V alloy by plasma electrolytic oxidation. Anodized alloys were prepared at 280V voltage in the solution containing Si, Zn, and Mn ions. The surface characteristics of PEO treated Ti-6Al-4V alloy were investigated using XRD, FE-SEM, and EDS.

• 한국표면공학회지
• /
• 제51권2호
• /
• pp.116-125
• /
• 2018

Aluminum-doped zinc oxide (AZO) is a commonly used material for the front contact layer of chalcopyrite $CuInGaSe_2$ (CIGS) based thin film solar cells since it satisfies the requisite optical and electrical properties with low cost and abundant elemental availability. Low-resistivity and high-transmission front contacts have been developed for high-performance CIGS solar cells, and nearly meet the required performance. However, the durability of the cell especially for the corrosion resistance of AZO films has not been studied intensively. In this work, AZO films were prepared on Corning glass 7059 substrates by radio frequency magnetron sputtering depending on the hydrogen content. The electrical and optical properties and electrochemical corrosion resistance of the AZO films were evaluated as a function of the hydrogen content. With increasing hydrogen content to 6 wt%, the crystallinity, crystal size, and surface roughness of the films increased, and the resistivity decreased with increased carrier concentration, Hall mobility, oxygen vacancies, and $Zn(OH)_2$ binding on the AZO surface. At a hydrogen content of 6 wt%, the corrosion resistance was also relatively high with less columnar morphology, shallow pore channels, and lower grain boundary angles.

• 공업화학
• /
• 제9권1호
• /
• pp.52-57
• /
• 1998

알루미늄-공기전지의 4M KOH전해질에 아연화합물과 같은 첨가제를 넣어 수소발생 및 알루미늄의 부식에 미치는 영향을 검토하였다. 첨가제중의 아연화합물은 수소발생과전압을 증가시키고, TPC(tripotasium citrate)와 CaO는 알루미늄표면에 치밀한 막을 형성하여 수소발생속도와 알루미늄부식속도를 감소시켰다. 이들 첨가제들에 의해 고순도알루미늄(순도, 99.999%)의 개회로전위는 양의 방향으로, 알루미늄 No 1050(순도, 99.5%)의 개회로전위는 음의 방향으로 약간 이동했다. 개회로전위에서 첨가제는 수소발생속도와 알루미늄 부식속도를 감소시켰으며, 과전압이 증가할수록 수소발생속도가 감소하여 알루미늄의 이용율이 증가하였다. 높은 전류밀도$(>100mA/cm^2)$에서는 TPC/CaO/ZnO 첨가제에 의해 고순도 알루미늄의 이용율이 In,Ga,Tl 합금 알루미늄의 이용율과 비슷하였다.

• Restorative Dentistry and Endodontics
• /
• 제22권1호
• /
• pp.1-33
• /
• 1997

The objective of this study was to analyze the in vitro and in vivo corrosion products of low and high copper amalgams. The four different types of amalgam alloy used in this study were Fine cut, Caulk spherical, Dispersalloy, and Tytin. After each amalgam alloy and Hg were triturated according to the directions of the manufacturer by means of the mechanical amalgamator(Amalgam mixer. Shinhung Co. Korea), the triturated mass was inserted into a cylindrical metal mold which was 12mm in diameter and 10mm in height. The mass was condensed by 150Kg/cm compressive force. The specimen was removed from the mold and aged at room temperature for about seven days. The standard surface preparation was routinely carried out by emery paper polishing under running water. In vitro amalgam specimens were potentiostatically polarized ten times in a normal saline solution at $37^{\circ}C$(potentiostat : HA-301. Hukuto Denko Corp. Japan). Each specimen was subjected to anodic polarization scan within the potential range -1700mV to+400mV(SCE). After corrosion tests, anodic polarization curves and corrosion potentials were obtained. The amount of component elements dissolved from amalgams into solution was measured three times by ICP AES(Inductive Coupled Plasma Atomic Emission Spectrometry: Plasma 40. Perkim Elmer Co. U.S.A.). The four different types of amalgam were filled in occlusal and buccal class I cavities of four human 3rd molars. After about five years the restorations were carefully removed after tooth extraction to preserve the structural details including the deteriorated margins. The occlusal surface, amalgam-tooth interface and the fractured surface of in vivo amalgam corrosion products were analyzed. In vivo and in vitro amalgam specimens were examined and analyzed metallographically by SEM(Scanning Electron Microscope: JSM 840. Jeol Co. Japan) and EDAX(Energy Dispersive Micro X-ray Analyser: JSM 840. Jeol Co. Japan). 1. The following results are obtained from in vitro corrosion tests. 1) Corrosion potentials of all amalgams became more noble after ten times passing through the in vitro corrosion test compared to first time. 2) After times through the test, released Cu concentration in saline solution was almost equal but highest in Fine cut. Ag and Hg ion concentration was highest in Caulk spherical and Sn was highest in Dispersalloy. 3) Analyses of surface corrosion products in vitro reveal the following results. a)The corroded surface of Caulk spherical has Na-Sn-Cl containing clusters of $5{\mu}m$ needle-like crystals and oval shapes of Sn-Cl phase, polyhedral Sn oxide phase. b)In Fine cut, there appeared to be a large Sn containing phase, surrounded by many Cu-Sn phases of $1{\mu}m$ granular shapes. c)Dispersalloy was covered by a thick reticular layer which contained Zn-Cl phase. d)In Tytin, a very thin, corroded layer had formed with irregularly growing Sn-Cl phases that looked like a stack of plates. 2. The following results are obtained by an analysis of in vivo amalgam corrosion products. 1) Occlusal surfaces of all amalgams were covered by thick amorphous layers containing Ca-P elements which were abraded by occlusal force. 2) In tooth-amalgam interface, Ca-P containing products were examined in all amalgams but were most clearly seen in low copper amalgams. 3) Sn oxide appeared as a polyhedral shape in internal space in Caulk spherical and Fine cut. 4) Apical pyramidal shaped Sn oxide and curved plate-like Sn-Cl phases resulted in Dispersalloy. 5) In Tytin, Sn oxide and Sn hydroxide were not seen but polyhedral Ag-Hg phase crystal appeared in internal space which assumed a ${\beta}_l$ phase.