• 한국가스학회지
• /
• 제5권2호
• /
• pp.14-21
• /
• 2001

LPG를 이$\cdot$충전하는 접속장치 커플러의 손상기구를 조사하기 위하여 가스 충전소에서 장기간 사용한 커플러 및 부식 시험한 6/4 단조 황동의 미세 조직 및 부식생성물의 화학조성을 조사하였다. 커플러의 운전 중에 형성된 부식피막의 화학조성은 6/4 단조 황동의 합금 원소인 CU, Zn 이외에 주로 가스 또는 대기로부터 유입된 것으로 추정되는 S, C, O, Al, Si 등의 원소들이 검출되었다. 커플러의 미세 조직은 기지조직($\alpha$) 속에 석출상($\beta$)들이 불규칙하게 분산되어 있는 2상 구조를 이루고 있었으며, 납의 함량이 높은 커플러의 경우 충격강도가 낮게 나타났다. 6/4 단조 황동의 충격강도는 $10\%$ HCl 수용액과 Mattsson 용액의 부식 환경 하에서 거의 영향을 받지 않았으나, 응력부식 시험편에서는 시험시간이 증가됨에 따라 균열이 결정립계를 따라 전파되었다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 춘계학술발표회 논문집
• /
• pp.275-275
• /
• 2012

실용금속 중 가장 경량이고, 치수 안정성, 절삭성 등이 우수한 Mg과 각종 산업의 구조물, 전기전자 부품 등의 분야에서 방식용 코팅 제품으로 많이 사용되고 있는 Zn를 혼합박막으로 Zn-Mg 박막을 제작하였다. 또한 여기서는 모재와 Zn-Mg 박막 사이에 결합력 강화를 위하여 Al중간층을 삽입하고 (Zn-Mg)/Al 박막을 제작하였다. 이와 같이 혼합박막을 제작하는 것은 Zn, Mg, Al 등과 같은 단일박막의 밀착성과 내식성의 한계를 극복-향상시키기 위한 것이었다. 한편, 이와 유사한 혼합박막에 많이 사용되고 있는 희생양극의 성분적인 측면이나 구조적인 분석에 있어서는 연구의 진척이 많이 이루어지고 있지만, 밀착성과 내식성의 상관관계의 규명에 있어서는 기초 단계이다. 따라서 본 연구에서는 여러 가지 증착 조건에 따라 제작한 막에 대한 표면 몰포로지, 결정배향성, 밀착성과 내식성에 미치는 영향을 분석하여 이들의 상관관계를 규명함은 물론 Al 중간층의 유무에 따른 서로간의 특성을 분석하였다. 분석결과에 의하면 Zn, Mg, Al 단일박막과 Zn-Mg 혼합박막에 비해 Al 중간층을 삽입한 (Zn-Mg)/Al이 내식성은 물론 밀착성이 우수하게 나타났다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2011년도 춘계학술대회 및 Fine pattern PCB 표면 처리 기술 워크샵
• /
• pp.205-206
• /
• 2011

Cu thin films for electromagnetic wave shielding were prepared on PET film and Ni-coated PET film by using Dry and Wet coating method, such as evaporation method, DC sputtering method and copper sulfate($CuSO_4$). After that, Zn thin film and Ni thin film were prepared onto the Cu thin films by using evaporation dry process and Ni electro plating wet process as a finishing treatment, respectively. The result of conductivity test and corrosion resistance test revealed Cu thin films which were formed with bigger grain size and high Cu composition rate have superior properties. Zn thin film by dry evaporation process and Ni thin film by wet electro plating process on Cu thin films were largely contributed to corrosion resistance. However, Ni thin film by wet process made conductivity of all specimen worse, the other hand, Zn thin film by dry process made it better to improve condictivity of specimens just prepared by dry process.

• 한국표면공학회지
• /
• 제42권6호
• /
• pp.280-286
• /
• 2009

In this study, the corrosion property of copper alloy tubes in seawater has been investigated. Three copper alloys of nominal composition Cu-20Zn-2Al(Al-Brass), Cu-30Ni(CN70/30) and Cu-10Ni(CN90/10) were considered. The samples were immersed in 3%NaCl flowing solution at $90^{\circ}C$ for 30, 50 and 80 days. Corrosion rate of copper alloy tubes in 3%NaCl flowing solution was investigated by weight-loss measurements and electrochemical test. The CN70/30 showed lowest corrosion rate among three copper alloy tubes. Because of passive films formation, corrosion rates of three types of copper tubes were decrease with time. Surface characteristics of copper alloy tubes were analyzed by optical micrograph(OM), scanning electronic microscopy (SEM), energy dispersive X-ray analysis(EDAX) and X-ray diffraction patterns(XRD). CN70/30 showed partly pitting problem on the surface owing to high Fe content, even though having high resistant against corrosion. Cracks appeared on the surface of CN90/10 and CN70/30 after more than 50 days immersion, which could be derived from high nickel contents.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 후기학술대회논문집
• /
• pp.232-233
• /
• 2005

Stainless steel has been stably used closed by passivity oxidation films($Cr_2O_3$) is made by neutral atmospheric environment. However, passivity oxidation films of the surface of stainless steel occasionally comes to be destroyed in seawater which is influenced by an environment having halogen ion like $Cl^-$, then, localization corrosion comes to occur. Stainless steel 304 for shaft system material of the small-size FRP fishing boat on seawater environments made an experiment on simulation of sacrifical anode(Al, Zn). Through these experiment and study, following results have been obtained ; According to the field inspection and corrosion simulation, the corrosion on the 2nd class stainless steel shaft(STS 304) in FRP fishing boat has been verified to occur by crevice corrosion and galvanic corrosion etc.. According to the comparison and analysis of Stainless steel 304 shaft materials after simulation leaving unprotected and applying cathodic protection, unprotected shaft specimen of stainless steel 304 was severely corroded, but, protected shaft specimen was not totally corroded. This result is assumed to be made by the facts that anodic reaction, $Fe{\rightarrow}Fe^{2+}$ + $2e^-$, has been restricted by the cathodic protection current of sacrificial anode material.

• 한국주조공학회지
• /
• 제18권5호
• /
• pp.462-466
• /
• 1998

Interest in rapid solidification of magnesium alloys stems from the fact that conventional ingot metallurgy alloys exhibit poor strength, ductility, and corrosion resistance. Such properties can be improved by microstructural refinement via rapid solidification processing. Mg-5wt%Zn alloys have been produced as continuous strips by melt overflow technique and the strips were consolidated by hot extrusion. The yield stress, tensile strengh and ductility obtained in asextruded Mg-5wt%Zn alloy were ${\sigma}_{0.2}=152\;MPa$, ${\sigma}_{T.S{\cdot}}=263\;MPa$ and ${\varepsilon}=21.8%$. In order to evaluate the influence of additional elements on mechanical properties, Th and Zr were added in rapidly solidified Mg-5wt%Zn alloy. An 130% increase in yield stress of as-extruded Mg-5wt%Zn-3wt%Th-1wt%Zr alloy was attributed to grain refinement by rapid solidification and elemental addition.

• 대한화학회지
• /
• 제56권1호
• /
• pp.47-53
• /
• 2012

Borate 완충용액에서 Zn의 부동화 피막이 생성되는 과정과 부동화 피막의 전기적 특성을 조사하였다. 이 때 생성되는 산화피막은 Mott-Schottky 식이 적용되는 n-형 반도체 성질을 보였으며, ZnO와 $Zn(OH)_2$로 구성되어 두 종류의 주개(깊은 주개와 얕은 주개)가 존재함을 알 수 있었다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1269-1270
• /
• 2006

Mg-Zn-RE alloys had a novel lond period stacking ordered (LPO) structure. Their rapidly solidified powder metallurgy (RS P/M) alloys exhibited a combination of high strength and god ductility (tensile yield strength above 550 MPa and elongation above 5%). The LPO Mg-Zn-RE RS P/M alloys had high elevated temperature strength (tensile yield strength above 380 MPa at 473 K) and exhibited a high-strain-rate superplasticity at higher temperatures. In Japan, a national project for developing high strength LPO Mg-Zn-RE RS P/M alloys has started at 2003 for 5 years, which is founded by the Ministry of Economy, Trade and Industry (METI) of Japan. In the national project, project targets in materials performances have been achieved. The developed LPO Mg-Zn-RE RS P/M alloys exhibited higher tensile yield strength, fatigue strength and corrosion resistance than high strength aluminum alloys of extra-super-duralumin (7075-T6).

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2009년도 추계학술대회 초록집
• /
• pp.252-253
• /
• 2009

희생양극으로 많이 활용되고 있는 Zn, Mg 금속은 모재 금속과 갈바닉 쌍을 형성하여 방식체를 보호하게 된다. 본 실험에서는 SPCC 강판위에 Fe+Mg, Fe+Zn 강판을 각각 제작하여 갈바닉 전류와 갈바닉 전위를 측정하였다. 갈바닉 전류는 초기에 금속 표면의 산화피막의 영향으로 큰값을 나타났으나, 시간의 경과에 따라 안정적인 값을 나타냈다. 즉, 가스압의 증가에 따라 제작된 Fe+Mg, Fe+Zn박막의 내식성은 우수하게 나타났고, 가스압이 낮을수록 박막의 내식성은 떨어지는 것으로 나타났다. 갈바닉 전위는 철의 방식전위에 도달하는 시간에 따라 내식성의 우수성을 판단하였다.

• 한국표면공학회지
• /
• 제37권4호
• /
• pp.200-207
• /
• 2004

Molybdate chemical conversion coating layer formed on EGI has been studied in view of corrosion resistance, surface morphologies, and phases formed. It was found that coating layer consists of$ MoO_3$, $MoO_2$, Mo oxides having lower valences than 4 and ZnO. It is interesting to note that the coating layer formed at high Mo concentration (30 g/l) in the temperature range of $40-60^{\circ}C$ exhibited relatively high corrosion resistance, although thickness of coating layer is nearly identical with those formed under the other conditions. It was believed that an increase of driving force due to high Mo concentration plays an important role in the formation of corrosion-resistant coating layer, probably due to tile formation of dense coating layer.