• 한국재료학회지
• /
• 제4권4호
• /
• pp.445-452
• /
• 1994

가압 경수로 핵연료의 중성자 조사 조건에서 Zircaloy피복관의 3축방향으로의 변동거동은 집합도 계수에 따른 크립 이방성고 조사성장 이방성을 통하여 분석될 수 있다. 이러한 크립과 조사성장의 이방성이 Zircaloy피복관의 각 축방향 변형율에 미치는 영향을 평가할 수 있는 방법론이 제시되었다. 연소 후 측정된 KOFA Zircaloy-4피복관의 변형율과 핵연료 성능 분석 코드의예측치를 토대로 하여 각 축방향 변형율을 계산한 결과 KOFA Aircaloy-4 피복관의 원주방향 변형은 크립에 의해 주로 일어난 반면, 피복관의 길이방향 변형은 조사성장에 의하여 일어났으나 낮은 조사량에서는 크립의 영향도 상당히 큰것으로 나타났다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.185-186
• /
• 2002

Fretting of fuel rod cladding material, Zircaloy-4 tube, in PWR nuclear power plants must be reduced and avoided. Nowadays the introduction of surface treatments or coatings is expected to be an ideal solution to fretting damage since fretting is closely related to wear. corrosion and fatigue. Therefore. in this study the fretting wear experiment was performed using TiAlN coated Zircaloy-4 tube as the fuel rod cladding and uncoated Zircaloy-4 as on of grids, especially concentrating on the sliding component. Fretting wear resistance of TiAlN coated Zircaloy-4 tubes was improved compared with that of TiN coated tubes and uncoated tubes and fretting wear mechanisms were brittle fracture and plastic flow at lower slip amplitude but severe oxidation and spallation of oxidative layer at higher ship amplitude.

• Nuclear Engineering and Technology
• /
• 제52권9호
• /
• pp.2047-2053
• /
• 2020

Single-tube burst tests on hydrogenated Zircaloy-4 nuclear fuel cladding under simulated loss-of-coolant accident are conducted to evaluate the impact of hydrogen on burst parameters. The heating rate and initial pressure are varied from 5 K/s to 150 K/s and 5 bar-80 bar, respectively. The hydrogen concentration in the cladding is in the range of 0-2000 wppm. Burst stress is lower for hydrogenated cladding in α-phase. A significant loss of ductility is observed in α-phase and lower α + β-phase for hydrogenated cladding. However, the burst strain is higher for hydrogenated cladding in β-phase. There is a sigmoidal dependency of rupture area with initial stress and rupture area is larger for hydrogenated cladding. A novel burst stress correlation for hydrogenated Zircaloy-4 cladding has been proposed.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 제35회 춘계학술대회
• /
• pp.88-95
• /
• 2002

Fretting of fuel rod cladding material, Zircaloy-4 Tube, in PWR nuclear power plants must be reduced and avoided. Nowadays the introduction of surface treatments or coatings is expected to bean ideal solution to fretting damage since fretting is closely related to wear, corrosion and fatigue. Therefore, in this study the fretting wear experiment was peformed using TiAIN coated Zircaloy-4 tube as the fuel rod cladding and uncoated Zircaioy-4 tube as one of grids, especially concentrating on the sliding component. Fretting wear resistance of TiAIN coated Zircaloy-4 tubes was improved compared with that of TiN coated tubes and uncoated tubes and the fretting wear mechanisms were delamination and plastic flow following by brittle fracture at lower slip amplitude but severe oxidation and spallation of oxidative layer at higher slip amplitude.

• Nuclear Engineering and Technology
• /
• 제52권9호
• /
• pp.2054-2063
• /
• 2020

The high-temperature oxidation behavior of ZrSi₂ used as a coating material for nuclear fuel cladding was investigated for developing accident-tolerant fuel cladding of light water reactors. Bulk ZrSi₂ samples were prepared by spark plasma sintering. In situ X-ray diffraction was conducted in air at 900, 1000, and 1100 ℃ for 20 h. The microstructures of the samples before and after oxidation were examined by scanning electron microscopy and transmission electron microscopy. The results showed that the oxide layer of zirconium silicide exhibited a layer-by-layer structure of crystalline ZrO₂ and amorphous SiO₂, and the high-temperature oxidation resistance was superior to that of Zircaloy-4 owing to the SiO₂ layer formed. ZrSi₂ was coated on the Zircaloy-4 tube surface using laser 3D printing, and the coated tube was oxidized for 2000 s at 1200 ℃ under a vapor/argon mixture atmosphere. The outer surface of the coated tube was hardly oxidized (10-30 ㎛), while the inner surface of the uncoated tube was significantly oxidized to approximately 300 ㎛.

• Nuclear Engineering and Technology
• /
• 제18권3호
• /
• pp.218-227
• /
• 1986

가상적인 냉각제 상실 사고시의 조건하에 일어날 수 있는 취약화 현상에 대한 자료를 얻기 위하여 고온의 수중기 분위기에서 Zircaloy-4 핵연료피복관의 산화거동과 기계적성질 변화에 대한 연구를 수행하였다. 시편은 캔두형핵연료 피복관으로 사용되는 질칼로이 튜브를 사용하였으며 냉각제 상실 사고시 야기될 수 있는 수중기 분위기속 90$0^{\circ}C$와 1,00$0^{\circ}C$에서 유지시간을 변경하여 가면서 산화시켰다. 질칼로이 피복관의 표면과 내부에서 ZrO$_2$ 및 $\alpha$상의 형성속도 E는 온도와 시간의 함수인 E=1.1√Dt+0.002로 나타났다. 여기서 D는 온도에 의존하는 화산계수임. 시편에 대한 인장강도, 후프강도 및 연신율을 측정한 결과 단시간 산화된 시편의 인장강도는 원래의 피복관에 비해 처음에는 약간 증가하다가 계속되는 유지 시간에 따라 감소하였다. 후프강도는 유지 시간에 따라 많이 감소하지 않았으며 외경 방향의 인장율을 급격히 감소하였다. 피복관의 선택 방위 측정 결과 원래의 피복관 입자는 대부분이 기저면(0001)에 대한 극축이 외경 방향에 평행하게 놓였었으나 1,00$0^{\circ}C$에서 열처리한 경우는 극축이 외경 방향에 수직으로 변경됨을 알 수 있었으며 이러한 결정면의 방위분포 결과가 후프강도의 유지에 기여하는 것으로 추측되었다.

• 한국표면공학회지
• /
• 제35권5호
• /
• pp.312-318
• /
• 2002

A study on the change of mechanical properties and oxidation behavior of Zircaloy-4 fuel cladding after exposing at 90$0^{\circ}C$ and $1000^{\circ}C$ for various periods of exposure time under the steam atmosphere was carried out. The growth of the $ZrO_2$ layer combined with an oxygen-rich-phase layer into the Zircaloy tube material can be described by an expression, E = 1.1√Dt + $2 $\times$ 10^{-4}$ . The tensile strength of Zircaloy tubes increased for a short period of exposure time and decreased rapidly with further exposure while the hoop strength was not decreased greatly. In the meantime, the axial and circumferential elongations of oxidized Zircaloy tubes were decreased drastically with increasing exposure time as a result of embrittlement phenomena.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제34회 추계학술대회 개최
• /
• pp.19-26
• /
• 2001

The wear characteristic of Zircaloy-4 tube, which is used for a cladding of light water reactor fuel rod, is investigated experimentally. The experiment is conducted with contacting the crossed tube specimens in air as well as in water at room temperature with various combination of contact normal force and sliding distance of reciprocating motion. The contour and the volume of each wear are examined to study the effect of contact condition and environment on wear. As a result, it is found that the wear volume in the water environment is larger than that in the air for all the contact (i.e., force and sliding distance) conditions. However, the wear depth is greater in air than in water if the contact normal force and the sliding distance are larger. These are explained by the ease of detachment of wear particles from the contact surface. On the other hand, workrate model is applied with the contact shear force range measured by our wear tester. Investigated is the correlation between the workrate and the wear volume increase rate of the present experiment. The parabolic curve is found to fit well for the present wear data.

• Nuclear Engineering and Technology
• /
• 제50권2호
• /
• pp.218-222
• /
• 2018

An oxide-dispersion-strengthened (ODS) layer was formed on Zircaloy-4 tubes by a laser beam scanning process to increase mechanical strength. Laser beam was used to scan the yttrium oxide ($Y_2O_3$)-coated Zircaloy-4 tube to induce the penetration of $Y_2O_3$ particles into Zircaloy-4. Laser surface treatment resulted in the formation of an ODS layer as well as microstructural phase transformation at the surface of the tube. The mechanical strength of Zircaloy-4 increased with the formation of the ODS layer. The ring-tensile strength of Zircaloy-4 increased from 790 to 870 MPa at room temperature, from 500 to 575 MPa at $380^{\circ}C$, and from 385 to 470 MPa at $500^{\circ}C$. Strengthening became more effective as the test temperature increased. It was noted that brittle fracture occurred at room temperature, which was not observed at elevated temperatures. Resistance to dynamic high-temperature bursting improved. The burst temperature increased from 760 to $830^{\circ}C$ at a heating rate of $5^{\circ}C/s$ and internal pressure of 8.3 MPa. The burst opening was also smaller than those in fresh Zircaloy-4 tubes. This method is expected to enhance the safety of Zr fuel cladding tubes owing to the improvement of their mechanical properties.

• 분석과학
• /
• 제12권6호
• /
• pp.490-497
• /
• 1999

불활성기체용융-열전도도 측정법의 수소분석기를 개조하여 글로브박스에 설치했으며 조사핵연료피복관의 수소분석에 사용했다. Zr과 Ti 매질의 수소표준물질로 용융조제인 주석을 사용하지 않고도 수소함량 $3{\mu}g$까지 분석가능하였다. 시료의 크기가 작을수록 수소 회수율이 높았으며 지르칼로이 시료의 수소분석시 Ti 매질의 표준물질을 사용할 수 있음을 확인하였다. 수소분석에 사용한 실제 조사핵연료피복관의 평균 방사능은 10 mR/hr였으며 평균수소농도는 130 ppm이었다.