• Journal of the Korean Ceramic Society
• /
• v.14 no.3
• /
• pp.169-177
• /
• 1977

본 실험에서는 아직까지 규명되지 않은 Cubic Zincoxide의 실존 여부를 전자 현미경에 의해 확인함과 동시에 그 격자정수를 결정짓고져 한다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.9
• /
• pp.566-571
• /
• 2017

A soft baking process was used to enhance the electrical characteristics of solution-processed indium-zincoxide (IZO) thin-film transistors (TFTs). We demonstrate a stable soft baking process using a hot plate in air to maintain the electrical stability and improve the electrical performance of IZO TFTs. These oxide transistors exhibited good electrical performance; a field-effect mobility of $7.9cm^2/Vs$, threshold voltage of 1.4 V, sub-threshold slope of 0.5 V/dec, and a current on/off ratio of $2.9{\times}10^7$ were measured. To investigate the static response of our solutionprocessed IZO TFTs, simple resistor load type inverters were fabricated by connecting a resistor (5 or $10M{\Omega}$). Our IZO TFTs, which were manufactured using the soft baking process at a baking temperature of $120^{\circ}C$, performed well at the operating voltage, and are therefore a good candidate for use in advanced logic circuits and transparent display backplanes.

• Journal of the Korean Chemical Society
• /
• v.47 no.3
• /
• pp.213-219
• /
• 2003

The photochemical transformation of carbon monoxide in aqueous solution has been investigated at $25{\pm}0.1^{\circ}C$using ZnO as a photocatalyst. After irradiation of 253.7 nm UV light in the solution, carboxylation and carbonylation processes were carried out, and the formation of formic acid, oxalic acid, glyoxylic acid, formaldehyde and glyoxal was observed. The formation of the products depended on the pH values in the solution. The yield of formaldehyde and glyoxal increased in acidic solution whereas it decreased in basic solution. When the pH values in the solution increased above 11.5, the yield of formic acid increased rapidly. The initial quantum yields of the products were determined and the probable mechanisms for the reactions were presented on the basis of the products analysis.