• Food Science and Biotechnology
• /
• 제17권4호
• /
• pp.739-744
• /
• 2008

The method of yeast propagation has an influence on yeast physiology, fermentation ability, flocculation rate, and taste stability of beer. In order to find optimal conditions for propagation, several parameters were investigated in combinations. The bottom brewing yeast grown at $10^{\circ}C$ indicated that a higher flocculation capacity during the $1^{st}$ fermentation. However, the taste stability and the aroma profile were not affected by parameters of propagation investigated. The beer quality was rather affected by storage duration. In addition, a correlation between tasting and chemiluminescence was found at the beer, which was produced using bottom brewing yeast. The propagation at $10-25^{\circ}C$ with addition of zinc ion indicated the best condition to improve fermentation ability, flocculation rate, and filterability for bottom brewing yeast, whereas the propagation at $30^{\circ}C$ with addition of zinc ion showed the best condition to increase fermentation ability for top brewing yeasts.

• 대한화학회지
• /
• 제68권1호
• /
• pp.32-39
• /
• 2024

Glycerol dehydrogenase (GlyDH) plays a crucial role in the glycerol metabolism pathway by catalyzing the oxidation of glycerol to dihydroxyacetone (DHA). Previous studies of GlyDH have predominantly focused on unraveling the structural features of the active site and its binding interactions with ligand. However, the structural details of GlyDH in complex with both NAD⁺ and the substrate bound have remained elusive. In this study, we present the crystal structures of Klebsiella pneumoniae GlyDH (KpGlyDH) in the absence and presence of NAD⁺ at a resolution of 2.1 Å. Notably, both structures reveal the binding of the substrate, ethylene glycol, to the zinc ion. Interestingly, a significant change in the coordination number of the zinc ion is observed, with three in the absence of NAD⁺ and four in its presence. These findings shed light on the structural aspects of GlyDH and its interactions with NAD⁺ and the substrate.

• 한국세라믹학회지
• /
• 제47권6호
• /
• pp.598-602
• /
• 2010

When metal oxides are added into crystalline glaze, colors of glaze and crystals are similar as colorants generally. But the case of NiO in zinc crystalline glaze is different from general color development. When NiO is added to zinc crystalline glaze it can develop two or three colors. The active use of color development mechanism by adding NiO to the zinc crystalline glaze to control color of the base glaze and crystal with stability is investigated. This report is expected to contribute to the ceramic industry in improving application of zinc crystalline glaze. For the experiment of NiO, the quantity of NiO additives is changed to the base glaze for the most adequate formation of willemite crystal from previous research and firing condition: temperature increasing speed $5^{\circ}C/min$, holding 1 h at $1270^{\circ}C$, annealing speed $3^{\circ}C/min$ till $1170^{\circ}C$, holding 2 h at $1170^{\circ}C$ then naturally annealed. The samples are characterized by X-ray diffraction (XRD), UV-vis, and Micro-Raman. The result of the procedure as follows; Ni substitutes for Zn ion then glaze develops blue willemite crystals, as if cobalt is used, on brown glaze base. When NiO quantity is increased to over 5 wt%, willemite size is decreased, and the density of the crystal is increased, at the same time $Ni_2SiO_4$ (olivine) phase, the second phase, has been developed. The excessive NiO is reacted with silicate in the glass then developed green $Ni_2SiO_4$ (olivine), and quantity of $Ni_2SiO_4$ (olivine) is increased as quantity of willemite is decreased. It is proved to create three colors, blue, brown and green by controlling the quantity of NiO to the zinc crystalline glaze and it will improve the multiple use of colors to the ceramic design.

• 동아시아식생활학회지
• /
• 제26권4호
• /
• pp.314-324
• /
• 2016

To improve the color stability of chlorophyll in young barley leaf used as functional green biomaterial, the absorption spectrum, color values, and antioxidative activities of young barley leaf (YBL) treated with zinc ion solutions were investigated. The small pieces of fresh YBL in aqueous solution mixtures were autoclaved twice at $110^{\circ}C$ for 30 min (pH 5). Distilled water (BLA), 0.01% zinc chloride (BLAZ), 0.01% zinc citrate (BLAC), and 0.01% zinc lactate (BLAL) solutions were used. Treated YBL powders were extracted with 80% EtOH for 4 h. Chlorophyll a and b contents differed with different treatments. BLA decreased chlorophyll a and b contents, whereas others were maintained. Absorbance spectrums of chlorophyll at 400~700 nm showed different maximum peak wavelengths. After heating in acidic and neutral solutions (pH 3, 5, and 7), the colors of YBL and BLA changed from green to olive green, whereas BLAZ, BLAC, and BLAL remained green color. The antioxidative activities showed higher values in YBL extract than in treated extracts. From the above results, autoclaved YBL in zinc solution would increase the color stability and maintain green color regardless of acid and heat treatments.

• Restorative Dentistry and Endodontics
• /
• 제16권1호
• /
• pp.87-105
• /
• 1991

The purpose of this experiment was to measure the leaking and solubility of commonly used dental restorative materials - Silux plus (CS), Hi-pol (CH), Clearfil F-II, Fissureseal (FS), Glass-Ionomer cement Fuji Type II (GI), Amalgam Cavex 68 (AM), Zinc Phosphate Cement (ZP) and gutta-percha (GP) and investigate the relation between the solubility and marginal leakage. Disc-shape specimens were fabricated with each material and dipped into deionized water, 0.01M lactic acid and 0.005M KOH solution, thus the total ionic concentrations in each solution was measured with ion chromatograph after 1, 3, and 7 days, respectively. For the solubility test, each specimen was immersed in 0.001M and 0.01M lactic acid for 24 hours, respectively and total weight loss was calculated. Also, Zn leaking through the margin of restorations was measured. The obtained results were as follows: 1. The amounts of eluted ion from the eight materials were most in 0.01M lactic acid and least in deionized water. 2. Of the eight materials, the fluoride release was greatest for glass ionomer cement (GI) in 0.01 M lactic acid after 7 days. 3. In analysis of the divalent cation, Mg was eluted most for zinc phosphate cement (ZP) and Ca for Clearfil F-II (CF) in 0.01M lactic acid after 7 days. 4. In analysis of transition metals, Cu and Zn were detected only. 5. The solubility rate of eight materials was greater in 0.01M lactic acid than in 0.001M for 24 hours, for zinc phosphate cement (ZP) the rate was greatest (5.4%) in 0.001M lactic acid, and amalgam least (0.01%). 6. The Zn concentration of restorative material with Z.P.C base was greater in 0.01M lactic acid than in 0.001M lactic acid.

• 미생물학회지
• /
• 제8권1호
• /
• pp.41-51
• /
• 1970

S.albus subsp.와 S.globosus에서 Tetracyclin과 Streptomycin 같은 항생물질을 생성된다는 것은 이미 전보에서 밝힌 바 있다. 이들 두 種의 생장최적조건과 항생제 생성정도와의 관계를 배지성분과 그 농도에 따라 검토하였다. 그 결과 S.albus subsp.와 S.globosus 모두 배양시간이 130~150시간이 될때 항생물질 생성과 균체량이 최고에 달했다. 그리고 PH는 그 근처에서만 떨어지는 현상을 볼 수 있었다. 또한 두 균주 모두 탄소원으로서는 starch(4~5%)질소원으로서는 soybeam meal(1.5~2.0%)에서 균체의 생장도 양호하고 향균력도 높게 나타났다. 이외의 성분으로는 calcium carbonate(2mg/ml), potassium phosphate' dibasic(0.05M~0.01M), magnesium sulfate(0.01M~0.03M) ferric chloride(0.01M)가 가장 생장에 좋은 배지농도로 추정되며 zinc ion(0.0005M)은 균체생장을 현저하게 억제하였다.

• 미생물학회지
• /
• 제55권1호
• /
• pp.9-16
• /
• 2019

다양한 미생물은 세포와 주변의 과산화를 방지하고 여분의 에너지를 보관하기 위해 ${\alpha}$-acetolactate decarboxylase(ALDC)를 이용해 아세토인을 생성한다. 아세토인은 안전한 식품 향미 개선제이기 때문에 ALDC를 이용한 아세토인 생합성에 많은 산업체가 관심을 가지고 있다. ALDC는 ${\alpha}$-acetolactate의 탈카르복실화 반응을 통해 아세토인을 생산하는 금속 의존 효소이다. 본 논문에서는 고초균 아종 spizizenii의 ALDC(bssALDC) 결정구조를 $1.7{\AA}$ 해상도에서 보고한다. bssALDC는 두 개의 ${\beta}$-sheet가 중앙부를 형성하는 ${\alpha}/{\beta}$ 구조를 가진다. bssALDC는 중앙부의 소수성 상호작용과 주변부의 친수성 상호작용을 통해 이합체를 형성한다. bssALDC는 세 개의 histidine 잔기와 세 개의 물 분자를 이용해 아연 이온에 배위결합한다. 구조와 서열의 비교 분석에 기초하여 아연 이온과 이 주변부 bssALDC 잔기들이 bssALDC의 효소 활성부위임을 제안한다.

• 융합정보논문지
• /
• 제11권2호
• /
• pp.117-123
• /
• 2021

수계 아연 이온 전지의 신규 전극 활물질로서 헥사시아노 철산철(Fe4[Fe(CN6)]3, FeHCF)의 전기화학적 특성에 미치는 전해질 농도의 영향에 관하여 조사하였다. FeHCF 전극의 전기화학 반응 및 구조적 안정성에 전해질 농도가 크게 영향을 준다는 것이 전위 주사, 충전-방전 시험, X-선 회절 분석에 의해 확인되었다. 1.0-7.0 mol dm-3의 전해질 용액에서는 농도가 증가함에 따라 FeHCF 전극의 충전 및 방전 용량이 증가하였으나 사이클이 진행됨에 따라 서서히 감소하였다. 반면에 9.0 mol dm-3의 전해질 용액에서는 초기 용량은 상대적으로 작았으나 사이클 특성이 우수하였다. 전자의 전해질 용액에서 5사이클 진행된 FeHCF 전극은 반응 전과 비교하여 결정 구조에 변화가 있었으며, 후자의 경우에는 변화가 없었다. 이것은 FeHCF 전극의 전기화학적 성능이 전해질 용액 중에 존재하는 아연 이온의 수화 구조와 크게 관련이 있음을 시사하는 것이다.

• Bulletin of the Korean Chemical Society
• /
• 제32권9호
• /
• pp.3333-3337
• /
• 2011

$ZnMn_2O_4$ has been prepared by a mechanochemical process using a mixture of $Mn_2O_3$ and ZnO as starting materials, and investigated as a possible anode material for lithium-ion batteries. The phase evolution and morphologies of the ball-milled and annealed powders are characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM) with energy dispersive microanalysis (EDX), respectively. The solid-state reaction for the formation of $ZnMn_2O_4$, under the given experimental conditions, is achieved in a short time (30 min), and the prepared samples exhibit excellent electrochemical performances including an enhanced initial coulombic efficiency, high reversible capacity, and stable capacity retention with cycling.

• 환경위생공학
• /
• 제20권4호통권58호
• /
• pp.38-44
• /
• 2005

Cryptand resins were synthesized with 1-aza-15-crown-5 macrocyclic ligand attached to styrene divinylbenzene (DVB) copolymer with crosslink of $1\%,\;2\%,\;5\%\;and\;10\%$ by substitution reaction. The synthesis of these resins was confirmed by content of chlorine, element analysis, and IR-spectrum. The effects of pH, time, dielectric constant of solvent and crosslink on adsorption of uranium$(UO_2^{2+})$ ion were investigated. The uranium ion was showed fast adsorption on the resins above pH 3. The optimum equilibrium time for adsorption of metallic ions was about two hours. The adsorption selectivity determined in ethanol was in increasing order uranium$(UO_2^{2+})$ > zinc$(Zn^{2+})$ > samarium$(Sm^{3+})$ ion. The adsorption was in order of $1\%>2\%>5\%>10\%$ crosslink resin and adsorption of resin decreased in proportion to order of dielectric constant of solvents.