• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1992년도 폐기물 매립지의 공학적 특성과 개량기술
• /
• pp.33-66
• /
• 1992

Recently, waste landfills built on seashores have been increased because of the easy availability of broad area near the urban communities. To evaluate the performance of the marine clay landfill liner numerical contaminant transport analyses are performed by selecting the typical section of a waste landfill built on seashores and using hydraulic conductivity data obtained from the site. Also, the laboratory electrical resistivity test and the in-situ corrosion test are performed in order to analyze the influence of the soil and leachates composing the landfills on the construct ion materials. From the results of contaminant transport analyses, it is shown that the leachates can be migrated faster through narrow pervious channels than the wide homogeneous pervious tedium and the importance of good quality barriers to prevent the contaminant migration is recognized. In the laboratory electrical resistivity test all the earth materials except the cover soils saturated with distilled water have small resistivities, which shows a high potential of corrosivity of soils composing landfills. However, the degree of corrosion of specimens buried in the landfills was not so severe except the zinc and carbon steel specimens. This apparently conflict results present the necessity of the investigation of other major factors and the long term in-situ corrosion test.

• Bulletin of the Korean Chemical Society
• /
• 제33권1호
• /
• pp.243-247
• /
• 2012

Photocatalysis has been applied to decompose the waste and toxic materials produced in daily life and in the global environment. Pure $TiO_2$ (Zn-$TiO_2$-0) and Zn-doped $TiO_2$ (Zn-$TiO_2$-x, x = 3-10 mol %) samples were synthesized using a novel sol-gel and ammonia-evaporation method. The Zn-doped $TiO_2$ samples showed high photocatalytic activity for the degradation of methylene blue (MB). The physicochemical properties of the samples were investigated using XRD, SEM, ICP, DLS and BET methods. In addition, the most important measurement of photocatalytic ability was investigated by a UV-vis spectrophotometer. The effects of the mol % of zinc ion doping in $TiO_2$ on photocatalytic activity were studied. Among the mol % Zn ions investigated, the Zn-$TiO_2$-9 sample showed the highest photoreactivity. This sample removed 91.4% of the MB after 4 h, while the pure $TiO_2$ only removed 46.4% of the MB.

• Bulletin of the Korean Chemical Society
• /
• 제35권2호
• /
• pp.489-493
• /
• 2014

A phenylbenzimidazole derivatized sensor (L) that behaves as a ratiometric fluorescent receptor for $Zn^{2+}$ in water has been described. In HEPES buffer at pH 7.4, sensor L displays a weak fluorescence emission band at 367 nm. Upon addition of $Zn^{2+}$, the emission intensity at 367 nm is decreased, concomitantly, a new emission band centered at 426 nm is developed, thus facilitates a ratiometric $Zn^{2+}$ sensing behavior. Sensor L binds $Zn^{2+}$ through a 1:1 binding stoichiometry with high selectivity over other metal cations. Sensor L displays a linear response to $Zn^{2+}$ concentration from 0 to $6.0{\times}10^{-5}M$, sensor L also exhibits high sensitivity to $Zn^{2+}$ with a detection limit of $3.31{\times}10^{-7}M$.

• Corrosion Science and Technology
• /
• 제11권6호
• /
• pp.232-241
• /
• 2012

This work focused on corrosion of carbon steel bolted GECM/Al parts in tap water and NaCl solutions. In tap water and NaCl solutions, open circuit potential of GECM and its potentials in a series of carbon steel bolt>Ti>Al became active. Regardless of test materials, open circuit potentials in tap water were noble, and increasing NaCl concentration, its potentials became active. Immersion test of single specimen showed that no corrosion occur in Ti and GECM. In tap water, carbon steel bolt didn't show red corrosion product and in chloride solutions, corrosion rate in 1% NaCl solution was greater than its rate in 3.5% NaCl solution and red corrosion product in 1% NaCl solution was earlier observed than that in 3.5% NaCl solution. It seems that this behavior would be related to zinc-coatings on the surface of carbon stee l bolt. On the other hand, aluminium was corroded in tap water and chloride solutions. Corrosion of aluminium in tap water was due to the presence of chloride ion in tap water by sterilizing process.

• 접착 및 계면
• /
• 제4권3호
• /
• pp.1-8
• /
• 2003

철판에 도금한 아연을 구리이온으로 치환하는 치환도금법과 철판에 직접 구리를 증착하는 진공증착법으로 두께가 다른 구리박막 피복철판을 제조하여 배합고무와 접착성질을 조사하였다. 구리박막 피복철판과 배합고무의 접착세기는 제조방법에 관계없이 구리박막 두께에 따라 결정되었다. 구리박막이 75 nm보다 얇으면 안정한 접착층이 형성되어 황동판에 못지 않게 고무와 강하게 접착되었으나, 90 nm보다 두터우면 구리황화물이 지나치게 성정하여 접착세기가 약하였다.

• KSBB Journal
• /
• 제5권2호
• /
• pp.183-189
• /
• 1990

1,000l 규모의 인뇨로부터 순수한 urokinase를 정제하는 새로운 공정이 고안되었다. 2가 금속이온인 아연을 첨가하여 선택적으로 urokinase를 침전시켰으며, 이 방법은 뇨 중에 포함된 다른 단백질을 100~1,000배 농축할때도 사용할 수 있으며 10~20배의 경제효과를 얻었다. 침전물 속에 포함된 urokinate를 경제적으로 용출할기 위하여 0.1M EDTA/0.5M glycine, pH 9.0용액이 조성되었고, 용출액속에 포함된 높은 농도의 salt와 ion,뇨색소 등이 CM-Toyopeal column에 의해 신속하고 효과적으로 제거되었다. 최종적으로 사용된 benzamidine-Sepharose chromatog-raphy는 urokinase 정졔에 매우 효과적이었다. 이상의 공정을 통해, 1,000liter의 인뇨로부터 3$\times$$O^6IO$의 urokinase가 순수 정제 되었으며, 수욜은 약 50%, 정제도는 1,300배이었다. 또한 urokinase중에 12~14%의 pro-urokinase가 함유되어 있음이 확인되었다.

• KSBB Journal
• /
• 제8권4호
• /
• pp.336-340
• /
• 1993

생물고분자 생산을 위하여 오니에서 slime을 생산하는 Zoogloea ramigera 115를 선택하였다. 추출한 생물고분자는 카드뮴, 아연 같은 금속에 대해서 높은 흡착성능을 나타냈다. 특히 발효조 broth는 높은 흡착성능을 나타냄으로써 부가적인 분리공정없이 생물흡착제로서 사용 가능할 것이다. 생물고분자는 calcium alginate bead 형태로 고정화되어 유가금속 회수를 위하여 충전층 반응기에 사용되었다. 생물흡착제는 구리, 카드뮴, 망간, 아연에 대하여 80% 또는 그이상의 높은 제거율을 나타냈으며 흡착-탈착-재흡착 실험에서 높은 안정성을 나타냈다. 고정화된 생물고분자 시스템은 이온교환수지와 같은 다른 중금속 제거 시스템과 경쟁력 및 잠재적인 산업상 응용 가능성을 보였다.

• Bulletin of the Korean Chemical Society
• /
• 제28권1호
• /
• pp.68-72
• /
• 2007

A new PVC membrane potentiometric sensor that is highly selective to Hg2+ ions was prepared, using bis(2-hydroxybenzophenone) butane-2,3-dihydrazone (HBBD) as an excellent hexadendates neutral carrier. The sensor works satisfactorily in the concentration range of 1.0 × 10-6 to 1.0 × 10-1 mol L-1 (detection limit 4 × 10-7 mol L-1) with a Nernstian slope of 29.7 mV per decade. This electrode showed a fast response time (~8 s) and was used for at least 12 weeks without any divergence. The sensor exhibits good Hg2+ selectivity for a broad range of common alkali, alkaline earth, transition and heavy metal ions (lithium, sodium, potassium, magnesium, calcium, copper, nickel, cobalt, zinc, cadmium, lead and lanthanum). The electrode response is pH independent in the range of 1.5-4.0. Furthermore, the developed sensor was successfully used as an indicator electrode in the potentiometric titration of mercury ions with potassium iodide and the direct determination of mercury in some binary and ternary mixtures.

• 한국기계가공학회지
• /
• 제5권4호
• /
• pp.7-12
• /
• 2006

Galvanized steel pipe, copper pipe and stainless steel pipe, which is being used in waterworks piping materials. In case of galvanized steel pipe, the precipitation of a product is being generated due to the pollution of the tap water, a white water phenomenon, and various corrosion reaction because a zinc ion is melted by tap water. And in case of a cupper pipe, many problems which is harm in sanitation appeared because of a inflow of harmfulness substance by a frequent accident of a water leakage. So, to prevent these problems, it is substituted for stainless steel pipe. However, those problems is still occurring because of badness of welding, a problem of a water leakage in connection part, and a increment of construction expenses. Therefore, this research has examined the laying period according to each piping thickness and a corrosion shape according to each laying depth after laying in various soils(sandy loam, loamy, clay loam, clay) using galvanized steel pipe, copper pipe, and stainless steel pipe. That is, we has studied the data which is necessary for a rational method of preserving the quality of water by examining the corrosion properties of piping materials in the soil environment which waterworks piping materials is being used.

• 대한화학회지
• /
• 제10권4호
• /
• pp.175-180
• /
• 1966

Polarography에 의한 反應速度測定法 은 여러가지가 있고 또 많이 硏究되어 왔다. 그러나 그의 應用은 그렇게 많지 않으며, 본 실本 實驗에서는 Delabay의 圖解法과 Koutecky式을 利用하여 몇 가지 ion의 陰極反應速度를 求하고 이들 Data를 써서 簡易速度式을 檢討하였다.