• Corrosion Science and Technology
• /
• v.21 no.3
• /
• pp.184-199
• /
• 2022

Steel was exposed in an atmospheric environment, and atmospheric environmental factors that include chloride, humidity, SO₂, NO₂ etc. induced the corrosion of steel. Corrosivity categories classified by SO₂ and chloride deposition rate were low, but those classified by TOW were high in the Korean Peninsula, and on these environmental categories, the corrosivity of atmospheres classified by corrosion rate in carbon steel was low medium, C2-C3, and medium, C3 for zinc, copper, and aluminum. This work performed the outdoor exposure test for 10 years at 14 areas in Korea and calculated the atmospheric corrosion rate of carbon steel. The atmospheric corrosion behavior of carbon steel is discussed based on the various corrosion factors. When the corrosion product forms on carbon steel by atmospheric corrosion, cracks may also be formed, and through these cracks, the environmental factors can penetrate into the interior of the product, detach some of the corrosion products and finally corrode locally. Thus, the maximum corrosion rate was about 7.3 times greater than the average corrosion rate. The color difference and glossiness of carbon steel by the 10 year-outdoor exposure tests are discussed based on the corrosion rate and the environmental factors.

• Journal of Preventive Medicine and Public Health
• /
• v.24 no.3 s.35
• /
• pp.287-304
• /
• 1991

Tolerance to several toxic effects of cadmium, including lethality has been shown following pretreatment with cadmium and zinc. This study was designed to determine if tolerance also develops to Cd-induced hepatotoxicityandrenaltoxicity. Three groups of rats (A, B, C), each consisting of 16 rats, were studied and each group was divided into four subgroups (1, 2, 3, 4), 4 rats for each subgroup. Rats were subcutaneously pretreated with saline (A), $CdCl_2$ (0.5 mg/kg, B), and $ZnCl_2$ (13.0 mg/kg, C) during time periods of $1{\sim}6$ weeks. At the end of the period, rats were challenged with $CdCl_2$ (3.0, 6.0 and 9.0 mg/kg, ip). After giving the challenge dose, cadmium and metallothionein (MT) concentrations were determined and also observed the histologic change in liver and kidney. The concentration of cadmium in liver and kidney increased dose-dependently to the challenge dosage. These da indicate the kidney is a major target organ of chronic cadmium poisoning, and suggest that cadmium induced hepatic injury, via release of Cd-MT, may play an important role in the nephrotoxicity observed in response to long-term exposure to cadmium. In addition, histologic examination of group $A_2,\;A_3\;and\;A_4$ revealed moderate to severe cadmium toxicity, evidenced by infiltration of inflammatory cells, cell swelling, pyknosis, enlarged sinusoids and necrosis in liver, and tubule cell necrosis and degeneration in kidney. However, MT concentrations in liver and kidney were increased by the pretreatment of $CdCl_2$ and $ZnCl_2$, and their morphological findings were not significantly changed, comparing with control group. Higher MT concentration in liver and kidney observed in the pretreated groups constitutes a plausible explanation of the protective effects of pretreatment against the cadmium toxicity after challenge dosing.

• Clean Technology
• /
• v.25 no.1
• /
• pp.14-18
• /
• 2019

In general after the etching process, waste etching solution contains metals. (ex. Nickel (Ni), Chromium (Cr), Zinc (Zn), etc.) In this work, we proposed a recycling process for waste etching solution and refining from waste liquid contained nickel to make nickel metal nano powder. At first, the neutralization agent was experimentally selected through the hydrolysis of impurities such as iron by adjusting the pH. We selected sodium hydroxide solution as a neutralizing agent, and removed impurities such as iron by pH = 4. And then, metal ions (ex. Manganese (Mn) and Zinc (Zn), etc.) remain as impurities were refined by D2EHPA (Di-(2-ethylhexyl) phosphoric acid). The nickel powders were synthesized by liquid phase reduction method with hydrazine ($N_2H_4$) and sodium hydroxide (NaOH). The resulting nickel chloride solution and nickel metal powder has high purity ( > 99%). The purity of nickel chloride solution and nickel nano powders were measured by EDTA (ethylenediaminetetraacetic) titration method with ICP-OES (inductively coupled plasma optical emission spectrometer). FE-SEM (field emission scanning electron microscopy) was used to investigate the morphology, particle size and crystal structure of the nickel metal nano powder. The structural properties of the nickel nano powder were characterized by XRD (X-ray diffraction) and TEM (transmission electron microscopy).

• Resources Recycling
• /
• v.20 no.1
• /
• pp.3-13
• /
• 2011

Taiwan's annual steel production reached 21.29 million tons. EAF accounted for about half of this total, or 11.2 million tons in 2008. The other 10.09 million tons came from blast furnace and converter process methods. The annual EAF carbon steel production is about 9.76 million tons, and the quantity of dust generated from the EAF process is 160 thousand tons, or about 16kg of dust per ton of steel was produced. In 2009, there is Walez process for carbon steel EAF dust recycling, and the capacity is about 70,000 tons per year; and there is RHF/SAF process for stainless steel EAF dust, the capacity is 60,000 tons per year which is enough to treat stainless steel EAF dust in Taiwan. There are many new treatment facilities processes will be that introduced to recycle the EAF dust in the near future, these processes will perform smoothly and successfully in Taiwan. The estimation of recycled crude ZnO is about 90,000 tons each year. The recycling and upgrading crude zinc oxide will be the next important issue in Taiwn zinc and steel industry.

• Environmental Analysis Health and Toxicology
• /
• v.22 no.2 s.57
• /
• pp.171-175
• /
• 2007

Indigenous species means a species that is likely, due to historical presence, to occur at a specified site for some portion of its life span. Therefore, indigenous species can be useful as an indicator to assess environmental risk caused by hazardous chemicals in a specific site. So far a few toxicity studies using freshwater species which are indigenous to Korea have been carried out. In this study, a freshwater shrimp (Neocardina denticulata) indigenous to Korea was used for acute toxicity test of heavy metals. Neocardina denticulata were exposed to cadmium chloride $(CdCl_2)$, copper chloride $(CuCl_2)$ and zinc chloride $(ZnCl_2)$ using automatic flow-through system for 96 hours. The 96h LC50s were calculated as 0.043 $(0.042{\sim}0.045)mg\;CdCl_2/L,\;0.104(0.098{\sim}0.113)mg\; CuCl_2/L\;and\;2.021\;(1.633{\sim}2.594)mg\;ZnCl_2/L$. When compaired with some international standard species such as medaka(Oryzias latipes), Neocardina denticulata had high sensitivity. Therefore, this study suggested that Neocardina denticulata have possibilities for a sensitive test species to test heavy metal toxicity in aqua-system.

• Microbiology and Biotechnology Letters
• /
• v.45 no.4
• /
• pp.330-342
• /
• 2017

Statistical design of experiments was employed to optimize the media composition for the production of laccase from Bacillus sp. PK4. In order to find the key ingredients for the best yield of enzyme production from the selected eleven variables viz yeast extract, glucose, zinc sulphate, copper sulphate, potassium chloride, magnesium sulphate, calcium chloride, ferrous sulphate, sodium chloride, potassium dihydrogen phosphate ($KH_2PO_4$) and dipotassium hydrogen phosphate ($K_2HPO_4$), Plackett-Burman design was applied. The $MgSO_4$, $FeSO_4$, and $CuSO_4$ showed positive estimate, and their concentration optimized further. The steepest ascent method and Box-Behnken method revealed that 1.5 mM $MgSO_4$, 0.33 g/l $FeSO_4$ and 1.41 mM $CuSO_4$ were optimal for the laccase production by Bacillus sp. PK4. This optimization strategy leads to enhancement of laccase production from 2.13 U/ml to 40.79 U/ml. Agro-wastes residues replace the carbon source glucose in the optimized media namely sugarcane bagasse, wheat bran, rice husk, and groundnut shell, among these groundnut shells (117 U/ml) was found to enhance the laccase production significantly. The laccase produced by Bacillus sp. PK4 was found to have the potential to degrade persistent organic pollutant benzo[a]pyrene.

• Journal of the Korea Convergence Society
• /
• v.9 no.10
• /
• pp.271-276
• /
• 2018

In the industry, Zn galvanizing on the steel using the principle of sacrificial anode is used. The steel have some problem, specially corrosion problem. To solve corrosion problem, Zn-Mn alloy plating has been studied as one of the measures to increase the corrosion resistance rather than pure zinc plating. It is possible to be applied to automotive parts requiring high corrosion resistance even though the plating cost is high. In this study, Zn-Mn alloys were electrodeposited from an acidic chloride bath. The influence of the electrolytic conditions on the composition of the alloy plating in the chloride bath was investigated. As the current density of the cathode increases, Zn content of electrodeposit decrease and Mn content of electrodeposit increase. As the temperature of the electrolyte increases, Zn content of electrodeposit decrease and Mn content of electrodeposit increase. The results are explained by the cathode overvoltage curve of Mn and Zn.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.263-264
• /
• 2002

The tribological characteristic of several environmentally friendly lubricating base stocks was examined, and the effect of some commonly used additives on th tribological behavior of the lubricating oils was comparatively investigated on a four-ball machine. It has been found that the commercial additives including butene sulfide, wax chloride, zinc dialkyldithiophosphate and ashless P-N type agent helped to improve the friction-reducing and antiwear properties as well as the extreme pressure behavior. Non-toxic nanoscale $(CF)_x$ showed the best friction-reducing ability, though it registered relatively poor extreme pressure properties. The mechanism on friction of nano-scale material is discussed.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.5
• /
• pp.811-814
• /
• 2005

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.621-621
• /
• 2013

ZnO는 수열합성법을 사용하여 저비용으로 일차원 형태의 잘 정렬된 nanowire의 제작이 가능하며 높은 화학적, 열적 안정성을 가져 전계 방출 소자로써 많은 연구가 진행되고 있다. 본 연구는 수열합성법에 사용되는 ZnO 전구체(Zinc Nitrate, HMTA, PEI & Ammonium Chloride), 안정제(Ethanolamine)의 농도에 따른 ZnO의 형상 변화와 이에 따른 전계방출 특성을 비교 분석하였다. 전구체의 농도 변화에 따라 ZnO Film, Rod, Tip과 같은 형상 변화를 확인 할 수 있었으며, 안정제를 사용함으로써 고종횡비를 가지는 ZnO Tip을 제작하였다. 제작된 ZnO 에미터의 전계방출특성을 고진공 챔버에서 측정하였고, 에미터 형상이 전계방출에 미치는 영향을 비교 분석하였다.