• Journal of Oral Medicine and Pain
• /
• 제23권4호
• /
• pp.343-352
• /
• 1998

This experiment was performed to investigate effects of zinc containing solution on the major normal flora Staphylococccus aureus, Streptococus mutans and Candida albicans and to observe the variation according to anionic change and concentration difference. Zinc chloride, zinc iodide and zinc acetate solution were added to werially diluted broth culture so that each final concentration might be 0.25%, 0.5%. 1%. After that, 100ul of each aliquot was spreaded on each selective media plate( Mannitol Salts Agar plate for Staphylococcus aureus, Mitis Salivarius Agar plate for Streptococcus mutans and Sabouraud Destrose Agar plate for Candida albicans). The % killing was calculated bu CFU count after incubation under the appropriate condition. 1. zinc iodide, zinc chloride, and zinc acetate solutions showed inhibitory effects on Staphylococcus aureus, Streptococcus mutans and Candida albicans. 2. The inhibitory effects on Staphylococcus aureus were ranked in order of ainc iodide, zinc chloride and zinc actate. 3. The inhibitory effects on Streptococcus mutans were ranked in orfer of zinc iodide, zinc chloride and zinc acetate. 4. the inhibitory effects on Candida albicans showed no difference among zinc iodide, zinc chloride and zinc acetate. 5. The inhibitory effects of zinc chloride and zinc acetate on Staphylococcus aureus and Streptococcus mutnas showed increasing pattern as the concentration increase. But the inhibitory effects of zinc iodide on Staphylococcus aureus and Streptococcus mutans showed no apparent difference according to concentrations and it was the case with the inhibitory effects of zinc iodide, zinc chloride and zinc acetate on Candida albicans.

• Korean Chemical Engineering Research
• /
• 제49권6호
• /
• pp.752-757
• /
• 2011

암모니아수와 zinc acetate로부터 액상 수열합성법에 의한 ZnO의 제조에 있어 반응온도, 반응물의 농도와 혼합방법, 용액의 pH 등 반응조건에 따른 ZnO 입자의 형상과 입자분포 등 제조특성을 고찰하고, UV 조사하에 tartrazine의 광분해를 측정하여 합성된 ZnO의 광촉매로서의 성능을 확인하였다. 반응용액의 pH가 높을수록 ZnO 입자의 평균 크기는 증가하였고, zinc acetate의 농도가 증가할수록 그리고 반응온도가 증가할수록 입자의 크기는 감소하였다. 반응용액의 혼합시 암모니아수 주입 후에 zinc acetate를 첨가하였을 경우 더 작은 입자를 얻을 수 있었다. 최소 크기의 ZnO 입자의 생성을 위한 최적 조건은 용액의 pH 11.2, zinc acetate의 농도 0.6 M, 반응온도 $90^{\circ}C$였으며, 입자 평균크기는 3.133 ${\mu}$m이었다. 합성온도 $80^{\circ}C$, zinc acetate 농도 1.0M 및 반응용액의 pH 11.2의 조건에서 합성된 ZnO에 의한 tartrazine의 광촉매 분해는 분해시간 60분에서 약 97%의 분해율을 보였다.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권4호
• /
• pp.400-405
• /
• 1995

ZnO films have been grown easily with the conventional thermal evaporation method on SiO$\_$2/ coated Si wafers. Anhydrous zinc acetate has been used as evaporation source. Zinc-acetate was directly heated in the laboratory-made brass boat. Zinc-acetate was sublimed at the boat temperature of about 220.deg. C. The substrates were heated to 600.deg. C with home made tantalium heater. Oxygen has been flowed into the deposition chamber to change the partial pressure of oxygen. X-ray diffraction patterns showed all the films to be amorphous. The films deposited at high oxygen pressure exhibit higher resistivity than films at low pressure. Energy dispersive spectroscopy(EDS) and rutherford backscattering spectrometry(RBS) were conducted on the films to reveal the composition of the ZnO films.

• Korean Chemical Engineering Research
• /
• 제50권5호
• /
• pp.808-814
• /
• 2012

수열합성법을 이용하여 zinc acetate와 암모니아수를 $80^{\circ}C$의 고온에서 침전 반응시켜 광촉매용 산화아연 입자를 제조하였다. 암모니아수의 pH, 전구체인 zinc acetate의 농도 변화가 산화아연 입자의 특성에 미치는 영향을 조사하였다. 암모니아수 pH 11, zinc acetate의 농도 1.0M, 침전반응온도 $80^{\circ}C$의 조건에서 제조된 산화아연이 평균 입경 $3{\mu}m$로 가장 작았으며, SEM과 XRD 분석을 통하여 육방정계의 봉상 막대형, Anatase 형태의 산화아연이 제조됨을 확인할 수 있었다. DRS와 PL 분석을 통하여 제조된 산화아연이 200~400 nm의 자외선 영역에서 활성을 나타냄을 확인하였고, 자외선 조사 하에서 광분해 실험을 수행한 결과 산화아연은 3시간 동안 식용색소인 Brilliant blue FCF를 57%까지 분해할 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 추계학술대회 논문집
• /
• pp.129-133
• /
• 1994

$ZnO_{x}$ films were deposited by conventional thermal evaporation method. Zinc acetate was used as precursor. XRD and SEM results shows films as mixed stats of ZnO and zinc acetate. And EDX measurements reseal composition of films as $ZnO_{x}$.

• 한국전기전자재료학회논문지
• /
• 제14권2호
• /
• pp.104-110
• /
• 2001

Structural, optical and electrical properties of Cd$_{1-x}$ Zn$_{x}$S films deposited by chemical bath deposition(CBD), which is a very attractive method for low-cost and large-area solar cells, are presented. Especially, in order to control more effectively the zinc component of the films, zinc acetate, which was used as the zinc source, was added in the reaction solution after preheating the reaction solution and the pH of the reaction solution decreased with increasing the concentration of zinc acetate. The films prepared after preheating and pH control had larger zinc component and higher optical band gap. The crystal structures of Cd$_{1-x}$ Zn$_{x}$S films was a wurtzite type with a preferential orientation of the (002) plane and the lattice constants of the films changed from the value for CdS to those for ZnS with increasing the mole ratio of the zinc acetate. The minimum lattice mismatch between Cd$_{1-x}$ Zn$_{x}$S and CdTe were 2.7% at the mole ratio of (ZnAc$_2$)/(CdAc$_2$+ZnAc$_2$)=0.4. As the more zinc substituted for Cd in the films, the optical transmittance improved, while the absorption edge shifted toward a shorterwavelength. the photoconductivity of the films was higher than the dark conductivity, while the ratio of those increased with increasing the mole ratio of zinc acetate. acetate.

• 한국분말재료학회지
• /
• 제20권5호
• /
• pp.371-375
• /
• 2013

ZnO nanoparticles in the size range from 5 to 15 nm were prepared by zinc-lithium-acetate system. The morphologies and structures of ZnO were characterized by TEM, XRD and FT-IR spectra. UV-visible results shows that the absorption of ZnO nanoparticles is blue shifted with decrease in particles size. Furthermore, photoluminescence spectra of the ZnO nanoparticles were also investigated. The ZnO nanoparticles have strong visible-emission intensity and their intensities depend upon size of ZnO nanoparticles.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1649-1651
• /
• 2000

Optical properties of $Cd_{1-x}Zn_{x}S$ films deposited by :chemical bath deposition(CBD), which is a very attractive method for low-cost and large-area solar cells, are presented, Especially, in order to control more effectively the zinc component of the films, zinc acetate, which used as the zinc source, mixed in reaction solution after preheating and the pH of the reaction solution decreased with increasing the concentration of zinc acetate. The films prepared after preheating and pH control had larger zinc component and higher optical band gap. As the more zinc substituted for Cd in the films, the optical transmittance improved, while the absorption edge shifts to a shorter wavelength and the optical band gap increased. The photo conductivity of the films was larger than the dark conductivity, while the ratio of those increased with increasing the mole ratio of zinc acetate.

• 한국재료학회지
• /
• 제33권12호
• /
• pp.550-557
• /
• 2023

In zinc-air batteries, the gel polymer electrolyte (GPE) is an important factor for improving performance. The rigid physical properties of polyvinyl alcohol reduce ionic conductivity, which degrades the performance of the batteries. Zinc acetate is an effective additive that can increase ionic conductivity by weakening the bonding structure of polyvinyl alcohol. In this study, polymer electrolytes were prepared by mixing polyvinyl alcohol and zinc acetate dihydride. The material properties of the prepared polymer electrolytes were analyzed by Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). Also, Electrochemical impedance spectroscopy was used to calculate ionic conductivity. The electrolyte resistances of GPE, 0.2 GPE, 0.4 GPE, and 0.6 GPE were 0.394, 0.338, 0.290, and 0.213 Ω, respectively. In addition, 0.6 GPE delivered 0.023 S/cm high ionic conductivity. Among all of the polymer electrolytes tested, 0.6 GPE showed enhanced cycle life performance and the highest specific discharge capacity of 11.73 mAh/cm² at 10 mA. These results verified that 0.6 GPE improves the performance of zinc-air batteries.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권3호
• /
• pp.111-114
• /
• 2002

Using the plasma that we developed to generate a low-temperature plasma at atmospheric pressure, we have investigated the etching possibility of an air-exposed zinc oxide(ZnO) thin films. Hydrogen and methane radicals generated from the plasma were observed and their intensity was found to be dependent on the isomer of butyl acetate by an analysis with optical emission spectrosxopy. The etching ability of this plasma was evaluated by an emission intensity, etching time, rf power.