• Title/Summary/Keyword: Zigzag test

Search Result 49, Processing Time 0.02 seconds

Development of Ship Dynamics Model by Free-Running Model Tests and Regression (자유항주모형시험과 회귀분석을 통한 선체 동역학 모델의 개발)

  • Kim, Kiwon;Kim, Hoyong;Choi, Sungeun;Na, Ki-In;Lee, Hyuk;Seo, Jeonghwa
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.59 no.3
    • /
    • pp.173-182
    • /
    • 2022
  • The present study suggests a procedure of establishing a ship dynamics modeling by regression of free-running model test results. The hydrodynamic force and moment of the whole model ship is derived from the low-pass filtered acceleration in the turning circle and zigzag maneuver tests. Force and moment of the propeller and rudder are separated from that of the whole ship to acquire the hull force and moment terms, based on the principles of the component model. The low-pass filter frequency is verified in prior to dynamics modeling, to find the threshold frequency of 2.5 Hz. The dynamics modeling of the hull is compared with the component modeling by captive model tests. Because of strong correlation between sway velocity, yaw angular velocity, and heel angle, each maneuvering coefficient is not able to be validated, but the whole modeling shows good agreement with the captive model tests.

A Study on the Manoeuvrability of 1/42.0 Scaled KCS (1/42.0 KCS 모형선의 조종성능에 관한 연구)

  • Yun, Kunhang;Kim, Dong Jin;Yeon, SeongMo;Kim, Yoo-Chul;Kim, Yeon Gyu;Yang, Kyung-Kyu
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.59 no.5
    • /
    • pp.262-270
    • /
    • 2022
  • The emergence of new concept ships, such as autonomous ships, has drawn much attention on the manoeuvrability of ships because of the safe navigation and operation of ships. Although the manoeuvrability of KRISO Container Ship(KCS) has been frequently reported, there have been few documents of representative manoeuvre cases conducted in various methods by one institute. This paper presents the manoeuvrability of the ship in 1/42.0 model scale by 3 methods: free running model tests, horizontal planar motion mechanism tests, and computational fluid dynamics analysis. KRISO reports KCS manoeuvre data: 35° turning circle tests and 20/20(10/10) zigzag manoeuvring tests. In addition, a simple formula for integrating and comparing manoeuvre indices, Manoeuvrability Comparing Simple Index(MCSI), is proposed.

Spray Characteristics of In-Rack Sprinkler Heads (인랙스프링클러 헤드의 살수 특성)

  • Kim, Jong Hoon;Joung, Woo In;Myoung, Sang Youb;Jeong, Keesin;Kim, Woon Hyung
    • Fire Science and Engineering
    • /
    • v.31 no.3
    • /
    • pp.54-62
    • /
    • 2017
  • The aim of this study is to find out the water spray features of in-rack sprinklers for rack storage. This study conducted cold water flow test, measurement of spray angle and densities by angles for sprinkler head manufactured by a Korean company and a U.S. company. Korean sprinkler head had a wide angle of water spary. The water spray angle of a U.S. sprinkler head was narrow compared to the Korean sprinkler. In comparison of the Korean head with U.S. head of the same K80, the Korean head can send water to parts that are difficult to directly spray, but the spraying density by angle was low. U.S. head can send more water than Korean head at a narrow angle. In conclusion, for flammable materials placed in two or more rows in a rack storage, a zigzag arrangement with face sprinklers will be effective.

Characteristics of lightning Impulse Corona Discharges in SF6/CO2 Mixtures (SF6/CO2혼합기체 중에서 뇌임펄스코로나방전의 특성)

  • Lee, Bok-Hee;Baek, Young-Hwan;Oh, Sung-Kyun;Ahn, Chang-Hwan
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.20 no.1
    • /
    • pp.85-90
    • /
    • 2006
  • This paper presents experimental results relating to the preliminary breakdown characteristics in $SF_6/CO_2$ gas mixtures under a highly non-uniform electric field. The impulse pre-breakdown developments are investigated by the measurements of corona current and light emission images. As a result, the preliminary breakdown development mechanisms for both the positive and negative polarities were fundamentally same. The first streamer corona was initiated at the tip of needle electrode, and the leaders developed with a stepwise propagation and bridged the test gap. The pause time of leader pulses in the positive polarity was significantly shorter than that in the negative polarity. Also, the time interval between the first streamer corona onset and breakdown in the negative polarity was much longer than that in the positive polarity. The discharge channel path in the positive polarity was zigzag, and the leader channel in the negative polarity was thicker and brighter than that in the positive polarity.

Formative Application Using Korean Traditional Paper (한지패션소재의 조형적 활용)

  • Kim, Young-Eun
    • Fashion & Textile Research Journal
    • /
    • v.7 no.5
    • /
    • pp.472-480
    • /
    • 2005
  • It was proved the practical use of the unique traditional Korean paper through the previous researches. The purpose of this study was to suggest the adequate application which is making various applied patterns in the fashion products so as to contribute to textile, fashion, and Korean paper industry. Six kinds of vests with the same fashion material using the Korean traditional paper were manufactured in order to investigate the images of materials in case of wearing them on the actual human bodies. As the results of image assessment for the materials and the factor analysis, 'classical', 'natural', 'Korean traditional', 'rural' and 'luxury' images were presented as the representative image of the Korean traditional paper material. Making repeated patterns of stripes and zigzag by sewing-machine stitches showed the natural effect on Korean traditional paper. Well-matched harmony was shown between holes made by the needle in sewing and slits torn by the tension to the needle and the thread. Especially, transparency by irregular holes formed by artificial frictional washing could shown special formative arts harmoniously with semi-transparency of Korea traditional paper and touch of sewing yarn. After the unripe persimmon dyeing, holes made by the needle became more hard and tight. The changes were no longer shown by the artificial frictional washing and then fixed. As the result of applying the Korean traditional paper fashion materials with various patterns for the basic formed garments, it was shown that the common and simple garments were changed the garments with special formation which could be found on the art garments due to the creative touch and formative arts using the Korea traditional paper fashion material. A variety of formative application by means of the developed samples was suggested to enlarge the practicality. As the result of this study, it was discovered that the possibility and application of fashion goods through the developed samples made of Korean traditional paper.

Resistance of the New Varieties Milyang $\#21\;and\;\#23$ to Plant-and Leaf-hoppers (멸구$\cdot$매미충에 대한 수도 신품종 밀양 21 및 23호의 저항성)

  • Choi S. Y.;Lee J. O.;Lee H. R.;Park J. S.
    • Korean journal of applied entomology
    • /
    • v.15 no.3 s.28
    • /
    • pp.147-151
    • /
    • 1976
  • Laboratory experiments were conducted to evaluate the resistance of the new rice varieties Milyang $\#$21 and $\#$23 at the seedling stage to the brown planthopper(Nilaparvata lugens), small brown planthopper(Laodelphax striatellus), white-back planthopper(Sogatella furcifera), green rorice leafhopper(Nephotettix cincticeps) and zigzag-striped leafhopper (Recilia dorsalis) The varieties Yushin and T(N)-1 were used as susceptible check and the resistant check varieties were Mudgo to brown planthopper, ASD-7 :o small brown planthopper, Colombo to white-back planthopper, IR2061 (46763) to green rice leafhopper and Vellailanalgayan to zigzag-striped leafhopper. The varieties Milyang $\#$21 and $\#$23 were moderate in plant reaction only to the green rice leafhopper and $\#$23 was moderately resistant in plant rection only to the small brown planthopper. The nymphs of plant-and leaf-hoppers were more prefered Milyang $\#$21 and $\#$23 and susceptible check-varieties were more preferred for feeding than the resistant check-varieties. The green rice leafhopper and aigzag·striped leafhopper much more prefered Milyang $\#$21 and $\#$23 for oviposition, while brown planthopper and small brown planthopper more prefered the resistant cheeks than test varieties and susceptible checks. However, there was no any steady relationship in ovipositional preference between resistant and susceptible to the hoppers. Shorter nymphal-periods and higher rate of adult emergence were observed in the test varieties and the susceptible checks compared with the resistant checks. In conclusion, the varieties Milyang $\#$21 and $\#$23 seemed to be lack of true resistance to the plant-and leaf-hoppers from the viewpoints of antibiosis and feeding preference.

  • PDF

Testing The Healing Environment Conditions for Nurses with two Independent Variables: Visibility Enhancement along with Shortening the Walking Distance of the Nurses to Patient - Focused on LogWare stop sequence and space syntax for U-Shape, L- Shape and I-Shape NS-

  • Shaikh, Javaria Manzoor;Park, Jae Seung
    • KIEAE Journal
    • /
    • v.15 no.2
    • /
    • pp.19-26
    • /
    • 2015
  • Purpose: Maximizing human comfort in design of medical environments depends immensely on specialized architects particularly critical care design; the study proposes Evidence-Based Design as an apparent analog to Evidence-Based Medicine. Healthcare facility designs are substantially based on the findings of study in an effort to design environments that augment care by improving patient safety and being therapeutic. On SPSS (Statistical Package for Social Science) t-test is applied to simulate two independent variables of PDR (Pre Design-Research) and POE (Post- Occupancy Evaluation). PDR is conducted on relatively new hospital Hallym University Dongtan Sacred Heart Hospital to analyse visibility from researchers' point of view, here the ICU is arranged in I-Shape. POE is applied on Dongguk University Ilsan Hospital to simulate walking on LogWare where two NS are designed based on L- Shape and Seoul St. Mary's Hospital, The Catholic University of Korea where five NS are functional for ICU Intensive Care Unit, Surgical Intensive Care Unit (SICU), Medical Intensive Care Unit (MICU), Critical Care Unit (CCU), Korean Oriental Medical Care Unit which are mostly arranged in U-Shape, and walking pattern is recognized to be in a zigzag path. Method: T-Test is applied on two dependent communication variables: walkability and visibility, with confidence interval of 95%. This study systematically analyses the Nurse Station (NS) typo-morphology, and simulates nurse horizontal circulation, by computing round route visits to patient's bed, then estimating minimum round route on LogWare stop sequence software. The visual connectivity is measured on depth map graphs. Hence the aim is to reduce staff stress and fatigue for better patients care by minimizing staff horizontal travel time and to facilitate nurse walk path and support space distribution by increasing effectiveness in delivering care. Result: Applying visibility graph and isovist field on space syntax on I- Shape, L- Shape and U- Shape ICU (SICU, MICU and CCU) configuration, I-shape facilitated 20% more patients in linear view as they stir to rise from their beds from nurse station compared to U-shape. In conclusion, it was proved that U-Shape supply minimum walking and maximum visibility; and L shape provides just visibility as the nurse is at pivot. I shape provides panoramic view from the Nurse Station but very rigorous walking.

A Study on Automatic Operation Control of Autonomous Ships (자율운항선박의 운항 자동제어 기초 연구)

  • Kang, Byung-Sun;Jung, Chang-Hyun
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.27 no.1
    • /
    • pp.38-46
    • /
    • 2021
  • In the era of the 4th Industrial Revolution, the interest in autonomous ship technology is increasing as high-tech technologies are being increasingly utilized throughout the industry. Therefore, we conducted a basic study on autonomous ships. In particular, a passenger ship model was produced and an autonomous navigation system was established by applying the ardupilot used for drones. The possibility of automatic control of the autonomous ship operations was confirmed by executing various voyage plans using the built model ship. In the performance test for maintaining the course the model ship could not follow the designated course straight and sailed up to 5.4 m away from the course while navigating in a zigzag (S-shape); however, after the parameters were modified, the deviation distance was reduced to a maximum of 1.8 m. In the turning performance test, the maximum diameter of the turning sphere was found to be approximately 9.3 m, but no significant change could be confirmed even after the parameters were modified. However, the results of our tests on slowing down the ship before arriving at the WP confirmed that the diameter of the turning sphere was reduced to a maximum of approximately 3.2 m. In order to evaluate the stopping performance, the last scheduled stopping position of all experiments was compared with the actual stopping position of the model ship and it was confirmed that the model ship stopped at a point at least 0.4 m and a maximum of 6.2 m away from the stopping position. In the future, improvement of course stability, turning performance, and stopping performance is required through modification and supplementation of various parameters. Moreover, a study on automatic berthing of the model ship through automatic control is planned.

Pink Mold Rot on Unishiu Orange (Citrus unshiu Mac.) Caused by Trichothecium roseum (Pers.) Link ex Gray in Korea (Trichothecium roseum에 의한 감귤 분홍빛열매썩음병 발생)

  • Kwon, Jin-Hyeuk;Kang, Dong-Wan;Choi, Okhee;Shim, Hong-Sik
    • Research in Plant Disease
    • /
    • v.19 no.3
    • /
    • pp.226-228
    • /
    • 2013
  • In 2012, a pink mold rot was observed on unishiu orange (Citrus unshiu Mac.) fruits at the Wholesale Market for Agricultural Products, Jinju, Korea. The symptom on unishiu orange was a water-soaked lesion on the surface of fruit, which later on enlarged to form softened brown rot lesions. The diseased fruits were covered with pink-colored mold, consisting of conidia and conidiophores of the pathogen. Optimum temperature for mycelial growth was $25^{\circ}C$. Conidia were hyaline, smooth, 2-celled, and thick-walled conidia with truncate bases, ellipsoidal to pyriform, characteristically held together zig-zag chains and $12-26{\times}8-12{\mu}m$ in size. Conidiophore was erect, colorless, unbranched, and 4-5 ${\mu}m$ wide. On the basis of mycological characteristics, pathogenicity test, and molecular analysis with complete ITS rDNA region, the causal fungus was identified as Trichothecium roseum (Pers.) Link ex Gray. This is the first report of pink mold rot caused by T. roseum on unishiu orange in Korea.