• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.8
• /
• pp.1510-1518
• /
• 2006

As a promising technology that enables ubiquitous computing and leads IT(information Technology) industries of next generation, the exciting new field of sensor networks is attracting so much attention and considered to be the one of the hottest research topics these days. From now on, all the each node, forming a network, and even the sensor network itself will interact with the generic network and evolve dynamically according to the change of environment with the perpetual creation and extinction. In this paper, we purpose the dynamic address interworking scheme for interactive networking between sensor network and Internet(IPv6). Proposed scheme is enable to interworking dynamically between sensor network address scheme based on Zigbee and Internet address scheme based on IP. Additionally, we implement the proposed address interworking scheme using Berkeley TinyOS, mica motes, and IP protocol. And, we verify the proposed scheme by the interconnection experimental between wireless sensor networks and Internet based on IPv4/IPv6.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.4
• /
• pp.353-361
• /
• 2017

As ship-based tourism increases, safe sailing and management are necessary to prevent maritime accidents. Because external rescue support cannot arrive rapidly in the case of ship-related accidents, the initial response is very important for damage minimization. Further, for secondary damage prevention, it is necessary to accurately determine passenger positions. In this paper, considering the characteristics of a ship, the enhanced-Zigbee(e-Zigbee) position determination technology (PDT) is applied, which improved upon the Zigbee PDT by having advantages such as low power consumption and smaller size. According to user needs, a low-cost and high-precision passenger positioning tag and access point(AP) is provided. A ship testbed that yields improved positioning accuracy based on a performance evaluation is constructed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.5
• /
• pp.616-622
• /
• 2020

Recently, as the interest in power saving increases with the development of IoT technology, research on power saving of smart devices, which are being miniaturized, is being actively conducted. In particular, due to the diversification of IoT-based smart devices and the increase in personal penetration rate, the issue of standby power even when not in use is increasing. However, there is a drawback of physically unplugging the outlet or turning off the power in order to substantially reduce standby power. Since Zigbee is used instead of the existing IP, it is necessary to change to the IoT standard protocol based on the Internet network. Therefore, this paper designed and implemented the standby power saving system applying CoAP, the IoT standard protocol, to the existing Zigbee technology. Existing systems and evaluations confirmed that the average standby power of about 8.4Wh was reduced.

• The Journal of the Korea Contents Association
• /
• v.11 no.12
• /
• pp.78-87
• /
• 2011

A variety of intelligent application using the sensor network system is being studied. In general, the sensor network consists of nodes which equipped with a variety of sensing module and is utilized to collect environment information. Recently, the demands of multimedia data are increasing due to the demands of more detailed environmental monitoring or high-quality data. In this paper, we overcome the limitations of low bandwidth in Zigbee-based sensor networks and propose a routing algorithm for real-time multimedia data transmission. In the previously proposed algorithm for multimedia data transmission occurs delay time of routing setup phase and has a low data transmission speed due to bandwidth limitations of Zigbee. In this paper, we propose the hybrid routing algorithm that consist of Zigbee and Bluetooth and solve the bandwidth problem of existing algorithm. We also propose the disjointed multipath setup algorithm based on competition that overcome delay time of routing setup phase in existing algorithm. To evaluate the superiority of the proposed algorithm, we compare it with the existing algorithm. Our experimental results show that the latency was reduced by approximately 78% and the communication speed is increased by approximately 6.9-fold.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.6
• /
• pp.1063-1068
• /
• 2008

BACnet(Building Automation and Control Networks) is a standard data communication protocol specifically designed for building automation and control systems, BACnet provides six options for data link layer protocols and these six data link layer options can be applied with various wired transmission media. Recently wireless technology prevails in automation area. ZigBee is an IEEE 802.15.4 based standard communication protocol for low-rate wireless personal area networks. In this study, we propose a BACnet over ZigBee model that adopts ZigBee communication channel as a wireless data link layer protocol in a BACnet-based communication network system. The technology proposed in this paper can expand the BACnet application using the advantages of wired and wireless integrated network solution.

• Journal of Advanced Navigation Technology
• /
• v.17 no.6
• /
• pp.664-671
• /
• 2013

In this paper, in an aircraft power can be measured by wireless AEMS (aircraft electric power measurement monitoring system) system is proposed. AEMS has been design based on current commercialized power measuring systems analysis with improvement and connects it with most talked about item, smart phone and monitoring system. And also adopting real time power measuring system, constitute more practical power measuring system by controlling electricity usage in real time.

• Journal of Multimedia Information System
• /
• v.6 no.3
• /
• pp.131-138
• /
• 2019

With the rapid evolution of communication technology, it became possible to overcome the spatial and temporal limitations faced by humans to some extent. Furthermore, the quality of personal life was revolutionized with the emergence of the personal communication device commonly known as the smart phone. In terms of defense networks, however, due to restrictions from the military and security perspectives, the use of smart phones has been prohibited and controlled in the army; thus, they are not being used for any defense strategy purposes as yet. Despite the current consideration of smart phones for military communication, due to the difficulties of network configuration and the high cost of the necessary communication devices, the main tools of communication between soldiers are limited to the use of flag, voice or hand signals, which are all very primitive. Although these primitive tools can be very effective in certain cases, they cannot overcome temporal and spatial limitations. Likewise, depending on the level of the communication skills of each individual, communication efficiency can vary significantly. As the term of military service continues to be shortened, however, types of communication of varying efficiency depending on the levels of skills of each individual newly added to the military is not desirable at all. To address this problem, it is essential to prepare an intuitive network configuration that facilitates use by soldiers in a short period of time by easily configuring the strategy network at a low cost while maintaining its security. Therefore, in this article, the author proposes a Zigbee-based local strategic network by using Opnet and performs a simulation accordingly.

• Journal of Korea Multimedia Society
• /
• v.23 no.3
• /
• pp.421-429
• /
• 2020

Recently, with the development of IoT technology and the increase of energy consumption, interest in energy saving and energy efficiency improvement is rapidly increasing. In particular, in the case of a device connected to a power plug with the power shutoff, a problem with standby power has been raised. Thus technology development through a low power method such as Zigbee is in progress. However, Zigbee, which is generally used, has a problem that a separate gateway is required because it is not an IP-based technology, and there is a problem that it is not suitable for a traditional computer network to which a variety of devices are connected. Therefore, in this paper, we designed and implemented a standby power saving system using MQTT, an IoT standard protocol, in Z-Wave environment. In order to evaluate the implemented standby power saving system, the same environment as the existing Zigbee-based standby power saving system was compared and evaluated.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.5
• /
• pp.123-129
• /
• 2014

This paper suggests that it provides a electricity management system for wasting electricity, from power demand growth environments. This Energy management system based on ICT(Information & Communication Technology) can control Smart Power Outlet connecting to this system with Web Browser and Android phone, anytime, anywhere. Through analysis of acquisition data from them, this proposed system can monitor and control power consumption efficiently. This system was organized mesh network of Smart Power Outlet, gateway by wireless Zigbee, and ESS(Energy Saving System) by TCP/IP beyond existing limit of communication distance and space.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12A
• /
• pp.1261-1269
• /
• 2008

This paper presents an implementation of the Network Capable Application Processor (NCAP) and the Wireless Transducer Interface Module (WTIM) architectures based on the new IEEE P1451.5 standard. Proposed architecture is implemented using a computer for NCAP, an FPGA board, a sensor board and two radio modules, which communicate through the ZigBee wireless communication technology between the NCAP and the WTIM based on the IEEE 1451.0 and the IEEE 1451.5 interfaces. In this paper, two experiments has been done to verify operations of proposed architecture. From the experimental results, we verify that the proposed architecture performs the wireless sensor communication functions efficiently.