• Asian Pacific Journal of Cancer Prevention
• /
• 제13권3호
• /
• pp.1053-1057
• /
• 2012

Objective: Identifying cancer-related genes or proteins is critical in preventing and controlling colorectal cancer (CRC). This study was to investigate the clinicopathological and prognostic value of activating transcription factor 1 (ATF1) in CRC. Methods: Protein expression of ATF1 was detected using immunohistochemistry in 66 CRC tissues. Clinicopathological association of ATF1 in CRC was analyzed with chi-square test or Fisher's exact test. The prognostic value of ATF1 in CRC is estimated using the Kaplan-Meier analysis and Cox regression models. Results: The ATF1 protein expression was significantly lower in tumor tissues than corresponding normal tissues (51.5% and 71.1%, respectively, P = 0.038). No correlation was found between ATF1 expression and the investigated clinicopathological parameters, including gender, age, depth of invasion, lymph node status, metastasis, pathological stage, vascular tumoral emboli, peritumoral deposits, chemotherapy and original tumor site (all with P > 0.05). Patients with higher ATF1 expression levels have a significantly higher survival rate than that with lower expression (P = 0.026 for overall survival, P = 0.008 for progress free survival). Multivariate Cox regression model revealed that ATF1 expression and depth of invasion were the predictors of the overall survival (P = 0.008 and P = 0.028) and progress free survival (P = 0.002 and P = 0.005) in CRC. Conclusions: Higher ATF1 expression is a predictor of a favorable outcome for the overall survival and progress free survival in CRC.

• Journal of Microbiology and Biotechnology
• /
• 제18권1호
• /
• pp.153-159
• /
• 2008

The limitations in current technology for generating transgenic animals, such as the time and the expense, hampered its extensive use in recombinant protein production for therapeutic purpose. In this report, we present a simple and less expensive alternative by directly infusing a recombinant adenovirus vector carrying human lactoferrin cDNA into rabbit mammary glands. The milk serum was collected from the infected mammary gland 48 h post-infection and subjected to a 10% SDS-PAGE and Western blotting. An 80-kDa protein was visualized after viral vector infection. With this method, we obtained a high level of expressed human lactoferrin of up to 2.3mg/ml in the milk. Taken together, the method is useful for the transient high-level expression recombinant proteins, and the approach established here is probably one of the most economical and efficient ways for large-scale production of recombinant proteins of biopharmaceutical interest.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2010년도 정기총회 및 추계학술발표회
• /
• pp.15-15
• /
• 2010

Ginseng contained many different kinds of saponin which was the most valuable for people, but its yield cannot satisfy the demand using traditional extract methods. Enzyme transformation is a conformable and highly performed method which was fit for today. A ${\beta}$-glucosidase producing bacterium ($DCY51^T$) was isolated from Korean fermented-vegetable food kimchi. The 16S rRNA gene sequence analysis revealed that the strain $DCY51^T$ belongs to the genus Lactobacillus. The highest sequence similarity was found with Lactobacillus paracollinoides LMG $22473^T$ and Lactobacillus collinoides LMG $9194^T$ with levels of 16S rDNA similarity of 97.4% and 97.3%, respectively. Based on the above results the strain $DCY51^T$ placed in the genus Lactobacillus and proposed a new species, Lactobacillus kimchicus sp. nov. $DCY51^T$ (= KCTC $12976^T$ = JCM $15530^T$). It was culture solution reacted with Red Ginseng extract and $Rb_1$, respectively. The medium of bacteria was the liquid of MRS, the temperatures of growing and reacting between bacteria liquid and saponin were samely $37^{\circ}C$, there spective reacting time were 12 hours and 48 hours. Thus we got different saponins, and TLC and HPLC analysis showed that: enzyme respectively reacted with $Rb_1$ and Red Ginseng extract got the transformed saponin, respectively. The polarity position in TLC was a little higher than Rd; and the polarity position was the same as that of Compound K's, the saponin obtained from HPLC and other experimental results was not Compound K. The constitution of its saponin was hoped to be further confirmed.

• 디지털융복합연구
• /
• 제18권3호
• /
• pp.349-355
• /
• 2020

제4차 산업혁명이 대두되며 다양한 산업들의 기술들이 융·복합 되거나 클라우딩 컴퓨팅, 모바일, 빅테이터 등의 기술로 인해 인류의 삶이 물질적이나 정신적으로 크게 변화하고 있다. 다양한 기술과 이에 맞는 새로운 직업의 탄생은 전통금속공예기술에 대한 교육과 직업에 있어 대중의 외면을 가져오고 있다. 이런 변화에 있어 공예교육 또한 현 시대에 맞는 교육방식을 찾고 연구하며, 교육 현장에 적용해 대중의 관심과 부흥을 일으켜야 한다. 이를 위해 새로운 소재 혹은 기술이 도입된 타 산업의 교육현장 사례를 조사하고 전통금속공예기법 교육에 활용하고자 한다. 또한 3D프린팅 기술의 다양한 사례와 특징을 조사하고 시간과 공간, 자원의 제약이 많은 공예기법 교육에 활용하여 전통금속공예기법 교육에 새로운 변화를 주고자 한다.

• Structural Engineering and Mechanics
• /
• 제15권1호
• /
• pp.83-114
• /
• 2003

A new simple 3-node triangular flat-shell element with standard nodal DOF (6 DOF per node) is proposed for the linear and geometrically nonlinear analysis of very thin to thick plate and shell structures. The formulation of element GT9 (Long and Xu 1994), a generalized conforming membrane element with rigid rotational freedoms, is employed as the membrane component of the new shell element. Both one-point reduced integration scheme and a corresponding stabilization matrix are adopted for avoiding membrane locking and hourglass phenomenon. The bending component of the new element comes from a new generalized conforming Kirchhoff-Mindlin plate element TSL-T9, which is derived in this paper based on semiLoof constrains and rational shear interpolation. Thus the convergence can be guaranteed and no shear locking will happen. Furthermore, a simple hybrid procedure is suggested to improve the stress solutions, and the Updated Lagrangian formulae are also established for the geometrically nonlinear problems. Numerical results with solutions, which are solved by some other recent element models and the models in the commercial finite element software ABAQUS, are presented. They show that the proposed element, denoted as GMST18, exhibits excellent and better performance for the analysis of thin-think plates and shells in both linear and geometrically nonlinear problems.

• Membrane and Water Treatment
• /
• 제11권5호
• /
• pp.323-331
• /
• 2020

With the increasing demand on reverse osmosis (RO) membranes for water purification worldwide, the number of disposed membrane elements is expected to increase accordingly. Thus, recycling and reuse of end-of-life RO membranes should be a global environmental action. In this work, we aim to reuse the spent RO membrane for nanofiltration (NF) and ultrafiltration (UF) process by subjecting the spent membrane to solvent and oxidizing solution treatment, respectively. Our results showed that solvent-treated RO membrane could perform as good as commercial NF membrane by achieving similar separation efficiencies, but with reduced water permeability due to membrane surface fouling. By degrading the polyamide layer of RO membrane, the transformed membrane could achieve high water permeability (85.6 L/㎡.h.bar) and excellent rejection against macromolecules (at least 87.4%), suggesting its reuse potential as UF membrane. More importantly, our findings showed that in-situ transformation on the spent RO membrane using solvent and oxidizing solution could be safely conducted as the properties of the entire spiral wound element did not show significant changes upon prolonged exposure of these two solutions. Our findings are important to open up new possibilities for the discarded RO membranes for reuse in NF and UF process, prolonging the lifespan of spent membranes and promoting the sustainability of the membrane process.

• Bulletin of the Korean Chemical Society
• /
• 제34권5호
• /
• pp.1421-1424
• /
• 2013

Two new isoflavanones, (3R) 5,7,3',4'-tetrahydroxy-2'-methoxyisoflavanone (1) and (3R) 5',8-di-(${\gamma}$,${\gamma}$-dimethylallyl)-2',5-dihydroxyl-4',7-dimethoxyl-isoflavanone (2), were isolated from Uraria clarkei, together with two known compounds dalbergioidin (3), 5,7-dihydroxy-2',4'-dimethoxyisoflavanone (4). The structures involving the absolute configuration of the new compounds were well elucidated by MS, IR, UV, CD, 1D and 2D NMR analyses. Cytotoxicity of the four compounds were assessed, results suggested that compound 2 possessed well cytotoxic activity, against the Hela, K562, and HL60 cell lines with $IC_{50}$ values of 28.0, 40.6 and $35.1{\mu}M$, respectively.

• Corrosion Science and Technology
• /
• 제6권5호
• /
• pp.257-260
• /
• 2007

In order to further improve the corrosion resistance and wear resistance of the Ni-P coatings of electroless plating, electroless Ni-P/n-$Al_2O_3$ composite deposits were prepared by adding some nano $Al_2O_3$ Particles in Ni-P plating bath. The bath composition and proproties were studied in this paper. The orthogonal test was applied in order to get the new composite solution, taking the initial stable potential as evaluation standard and considering the elements correlation at the same time. The processing parameters have been optimized by single factor experiment in which the depositing speed was chosen as the evaluation standard. The results showed that the process is stable and the composite Ni-P/n-$Al_2O_3$ deposits werebright and smooth, whose hardness and corrosion resistance are much better than simple Ni-P coatings. Furthermore the surface appearance and structure of the composite Ni-P/n-$Al_2O_3$ coating were investigated by SEM and XRD method. It was proved that the coating surface is typical cystiform cells and its structure is amorphous. All test results ofcomposite coating showed that all various physical coating properties had been improved by adding nano-particles. The hardness of optimal coating is more than 600HV and increases to 1000HV after heat-treating, and its hardness is 20~50% higher than Ni-P coating. The rust points appeared in 200 hour by immersing the coating into the 10%HCl solution and the corrosive speed is $3{\times}10^{-3}mg/(cm^2{\cdot}h)$which was obtained after 300 hour. In the same condition Ni-P coating is $5.6{\times}10^{-3}mg/(cm^2{\cdot}h)$. The salt spray resistance of the layers can exceed 600h with the thickness $20{\mu}m$.

• Smart Structures and Systems
• /
• 제30권1호
• /
• pp.75-88
• /
• 2022

Engineering structures in operation essentially belong to time-varying or nonlinear structures and the resultant response signals are usually non-stationary. For such time-varying structures, it is of great importance to extract time-dependent dynamic parameters from non-stationary response signals, which benefits structural health monitoring, safety assessment and vibration control. However, various traditional signal processing methods are unable to extract the embedded meaningful information. As a newly developed technique, variational mode decomposition (VMD) shows its superiority on signal decomposition, however, it still suffers two main problems. The foremost problem is that the number of modal components is required to be defined in advance. Another problem needs to be addressed is that VMD cannot effectively separate non-stationary signals composed of closely spaced or overlapped modes. As such, a new method named generalized adaptive variational modal decomposition (GAVMD) is proposed. In this new method, the number of component signals is adaptively estimated by an index of mean frequency, while the generalized demodulation algorithm is introduced to yield a generalized VMD that can decompose mode overlapped signals successfully. After that, synchrosqueezing wavelet transform (SWT) is applied to extract instantaneous frequencies (IFs) of the decomposed mono-component signals. To verify the validity and accuracy of the proposed method, three numerical examples and a steel cable with time-varying tension force are investigated. The results demonstrate that the proposed GAVMD method can decompose the multi-component signal with overlapped modes well and its combination with SWT enables a successful IF extraction of each individual component.

• Nuclear Engineering and Technology
• /
• 제55권7호
• /
• pp.2556-2566
• /
• 2023

A first-principle approach within the framework of density functional theory was employed to study the effect of vacancy defects and fission products (FPs) doping on the mechanical, electronic, and thermodynamic properties of uranium monocarbide (UC). Firstly, the calculated vacancy formation energies confirm that the C vacancy is more stable than the U vacancy. The solution energies indicate that FPs prefer to occupying in U site rather than in C site. Zr, Mo, Th, and Pu atoms tend to directly replace U atom and dissolve into the UC lattice. Besides, the results of the mechanical properties show that U vacancy reduces the compressive and deformation resistance of UC while C vacancy has little effect. The doping of all FPs except He has a repairing effect on the mechanical properties of U_1-xC. In addition, significant modifications are observed in the phonon dispersion curves and partial phonon density of states (PhDOS) of UC_1-x, Zr_xU_1-xC, Mo_xU_1-xC, and Rh_xU_1-xC, including narrow frequency gaps and overlapping phonon modes, which increase the phonon scattering and lead to deterioration of thermal expansion coefficient (α_V) and heat capacity (C_p) of UC predicted by the quasi harmonic approximation (QHA) method.