• 제목/요약/키워드: Zero(0)

검색결과 2,276건 처리시간 0.029초

2중 영 벡터 모드를 갖는 2상 개별 펄스 위치 변조기법 (A Two-Phase Separately Randomized Pulse Position PWM Technique with Double-Zero Vector Mode)

  • 김정근;오승열;정영국;임영철
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제53권12호
    • /
    • pp.739-750
    • /
    • 2004
  • In case while M(modulation index) is more than 0.7, the spectrum of motor voltage and current of a conventional two-phase SRP-PWM scheme are not reduced considerably. To solve the problems of a conventional two-phase SRP-PWM, this paper proposes a two-phase SRP-PWM(DZSRP-PWM) with double zero vector mode which zero vector is selected as V(111) in case of M >0.7, and zero vector is selected as V(000) if M < 0.7. For the validity of the proposed method, the PSIM simulations and experiments were achieved. And the simulation and experiment results show that the voltage and current harmonics all over the modulation index are spread to a wide band area.

0이 팽창된 포아송 회귀모형을 이용한 기부회수 자료의 재분석 (The Reanalysis of the Donation Data Using the Zero-Inflated Possion Regression)

  • 김인영;박태규;김병수
    • 응용통계연구
    • /
    • 제22권4호
    • /
    • pp.819-827
    • /
    • 2009
  • 김인영 등 (2006)은 두 개 포아송 분포의 혼합모형에 기초한 회귀모형으로써 2002년 (사)볼런티어 21에서 실시한 설문조사 자료를 분석하여 우리나라 개인들이 기부한 횟수에 영향을 미치는 유의적 변수들을 식별하였다. 본고에서는 김인영 등 (2006)에서도 언급하였듯이 기부횟수 0의 관찰 빈도와 예측 빈도간 차이가 유독 큰 점을 감안하여, 0이 팽창된 포아송(zero inflated Poisson: ZIP)을 기존의 두 개의 포아송 혼합분포에 추가하여 일종의 세 개 포아송 혼합분포 형태로 모집단 분포를 구성하며 동 모형의 회귀모형으로써 기부횟수 자료를 재분석하고자 한다. 회귀계수에 대한 추정은 두 단계 EM 알고리즘으로 이루어 졌고, 유의적 설명 변수의 검색은 김인영 등 (2006)과 같았으나 본 연구에서는 고정된 령(零)군의 비율을 0.201로 추정할 수 있었으며, 두 가지 유의적 설명변수인 소득과 자원봉사 중에서 자원봉사가 기부 횟수를 늘리는 안정적 도구 변수로써 작용할 수 있음을 보고하고 있다.

고정도 엔진 지압계에 관한 연구 (1) <온도 특성에 의한 영점이동의 보상> (A Study on the Precision Engine Indicatior(I) (Zero-shift Compensation of the Engine Indicator with a Electronic Device))

  • 박상길;문덕홍;안수길
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제7권1호
    • /
    • pp.34-39
    • /
    • 1983
  • Development of modern internal combustion engine requires more precise indicator. In the case of strain gage-strain tube type indicator, thermal expansion of the indicator's fixed part makes zero-shift in spite of water cooling. Therefore, the authors analyzed the cause of zero-shift phenomenon on strain gage-strain tube type indicator and proposed a new device to compensate the zero-shift of indicator by electrical method without detoriorating the dynamic charcteristic. As the results, we found that the zero-shift is varied linearlly according to temperature variation of the indicator's fixed part and appling a new device, we can improve the zero-shift of indicator about 0.63% (0.63 kg/$cm^2$) of full scale, though we got 10% of it without the device at the cylinder head operating temperature (c.a. $200^{\circ}C$).

  • PDF

ON SIGNLESS LAPLACIAN SPECTRUM OF THE ZERO DIVISOR GRAPHS OF THE RING ℤn

  • Pirzada, S.;Rather, Bilal A.;Shaban, Rezwan Ul;Merajuddin, Merajuddin
    • Korean Journal of Mathematics
    • /
    • 제29권1호
    • /
    • pp.13-24
    • /
    • 2021
  • For a finite commutative ring R with identity 1 ≠ 0, the zero divisor graph ��(R) is a simple connected graph having vertex set as the set of nonzero zero divisors of R, where two vertices x and y are adjacent if and only if xy = 0. We find the signless Laplacian spectrum of the zero divisor graphs ��(ℤn) for various values of n. Also, we find signless Laplacian spectrum of ��(ℤn) for n = pz, z ≥ 2, in terms of signless Laplacian spectrum of its components and zeros of the characteristic polynomial of an auxiliary matrix. Further, we characterise n for which zero divisor graph ��(ℤn) are signless Laplacian integral.

영과잉을 고려한 중심상업지구 교통사고모형 개발에 관한 연구 (Safety Performance Functions for Central Business Districts Using a Zero-Inflated Model)

  • 이상혁;우용한
    • 한국도로학회논문집
    • /
    • 제18권4호
    • /
    • pp.83-92
    • /
    • 2016
  • PURPOSES : The purpose of this study was to develop safety performance functions (SPFs) that use zero-inflated negative binomial regression models for urban intersections in central business districts (CBDs), and to compare the statistical significance of developed models against that of regular negative binomial regression models. METHODS : To develop and analyze the SPFs of intersections in CBDs, data acquisition was conducted for dependent and independent variables in areas of study. We analyzed the SPFs using zero-inflated negative binomial regression model as well as regular negative binomial regression model. We then compared the results by analyzing the statistical significance of the models. RESULTS : SPFs were estimated for all accidents and injury accidents at intersections in CBDs in terms of variables such as AADT, Number of Lanes at Major Roads, Median Barriers, Right Turn with an Exclusive Turn Lane, Turning Guideline, and Front Signal. We also estimated the log-likelihood at convergence and the likelihood ratio of SPFs for comparing the zero-inflated model with the regular model. In he SPFs, estimated log-likelihood at convergence and the likelihood ratio of the zero-inflated model were at -836.736, 0.193 and -836.415, 0.195. Also estimated the log-likelihood at convergence and likelihood ratio of the regular model were at -843.547, 0.187 and -842.631, 0.189, respectively. These figures demonstrate that zero-inflated negative binomial regression models can better explain traffic accidents at intersections in CBDs. CONCLUSIONS : SPFs that use a zero-inflated negative binomial regression model demonstrate better statistical significance compared with those that use a regular negative binomial regression model.

영가철 및 개질 영가철을 이용한 triclosan의 환원분해 특성 (Reduction Characteristics of Triclosan using Zero-valent Iron and Modified Zero-valent Iron)

  • 최정학;김영훈
    • 한국환경과학회지
    • /
    • 제26권7호
    • /
    • pp.859-868
    • /
    • 2017
  • In this study, the reductive dechlorination of triclosan using zero-valent iron (ZVI, $Fe^0$) and modified zero-valent iron (i.e., acid-washed iron (Aw/Fe) and palladium-coated iron (Pd/Fe)) was experimentally investigated, and the reduction characteristics were evaluated by analyzing the reaction kinetics. Triclosan could be reductively decomposed using zero-valent iron. The degradation rates of triclosan were about 50% and 67% when $Fe^0$ and Aw/Fe were used as reductants, respectively, after 8 h of reaction. For the Pd/Fe system, the degradation rate was about 57% after 1 h of reaction. Thus, Pd/Fe exhibited remarkable performance in the reductive degradation of triclosan. Several dechlorinated intermediates were predicted by GC-MS spectrum, and 2-phenoxyphenol was detected as the by-product of the decomposition reaction of triclosan, indicating that reductive dechlorination occurred continuously. As the reaction proceeded, the pH of the solution increased steadily; the pH increase for the Pd/Fe system was smaller than that for the $Fe^0$ and Aw/Fe system. Further, zero-order, first-order, and second-order kinetic models were used to analyze the reaction kinetics. The first-order kinetic model was found to be the best with good correlation for the $Fe^0$ and Aw/Fe system. However, for the Pd/Fe system, the experimental data were evaluated to be well fitted to the second-order kinetic model. The reaction rate constants (k) were in the order of Pd/Fe > Aw/Fe > $Fe^0$, with the rate constant of Pd/Fe being much higher than that of the other two reductants.

평면변형률상태에서의 von Mises 항복기준의 특성에 관한 이론적 연구 (Analytical Study on Characteristics of von Mises Yield Criterion under Plane Strain Condition)

  • 이승현;김병일
    • 한국산학기술학회논문지
    • /
    • 제16권9호
    • /
    • pp.6391-6396
    • /
    • 2015
  • 2차원 응력조건에 대한 von Mises 항복기준의 특징을 살펴보기 위해 탄성변형률이 0이 되는 평면변형률 조건과 소성변형률증분이 0이 되는 평면변형률 조건을 고려해 보았다. 탄성변형률이 0인 평면변형률조건을 통해 얻은 항복함수와 평면응력조건에서의 항복함수는 기하학적으로 타원을 나타내는데 두 경우에 대한 기하하적 비교를 타원의 장, 단축의 길이비와 이심률의 비로 나타낼 때 단축비는 같았으나 장축비 및 이심률의 비는 포아송비의 함수로 표현되었다. 탄성변형률이 0인 평면변형률조건을 통해 얻은 von Mises 항복기준에 대하여 탄성거동을 보이는 영역은 포아송비가 커짐에 따라 넓어짐을 알 수 있었다. 소성변형률증분이 0인 평면변형률조건을 통해 관련유동법칙을 써서 항복함수를 구하였는데 기하하적으로 볼 때 평면응력조건에서의 항복함수가 타원임과는 달리 직선을 나타내었으며 평면응력조건일 때보다 탄성거동영역이 컸다.

정부 품질보증활동 데이터 활용을 위한 Zero-Inflated 포아송 분포 적용 (Application of Zero-Inflated Poisson Distribution to Utilize Government Quality Assurance Activity Data)

  • 김지훈;이창우
    • 품질경영학회지
    • /
    • 제46권3호
    • /
    • pp.509-522
    • /
    • 2018
  • Purpose: The purpose of this study was to propose more accurate mathematical model which can represent result of government quality assurance activity, especially corrective action and flaw. Methods: The collected data during government quality assurance activity was represented through histogram. To find out which distributions (Poisson distribution, Zero-Inflated Poisson distribution) could represent the histogram better, this study applied Pearson's correlation coefficient. Results: The result of this study is as follows; Histogram of corrective action during past 3 years and Zero-Inflated Poisson distribution had strong relationship that their correlation coefficients was over 0.94. Flaw data could not re-parameterize to Zero-Inflated Poisson distribution because its frequency of flaw occurrence was too small. However, histogram of flaw data during past 3 years and Poisson distribution showed strong relationship that their correlation coefficients was 0.99. Conclusion: Zero-Inflated Poisson distribution represented better than Poisson distribution to demonstrate corrective action histogram. However, in the case of flaw data histogram, Poisson distribution was more accurate than Zero-Inflated Poisson distribution.

Manufacturing Zero-Cement Bricks by Replacing Cement with Recycled Aggregates and Blast Furnace Slag Powder

  • Park, Kyung-Taek;Han, Cheon-Goo;Kim, Dae-Gun
    • 한국건축시공학회지
    • /
    • 제13권1호
    • /
    • pp.29-37
    • /
    • 2013
  • In this study, a zero-cement brick is manufactured by replacing cement with recycled aggregates and blast furnace slag powder. Experimental tests were conducted with standard sized samples of $190{\times}57{\times}90mm$ (KS F 4004), and this manufacturing technique was simulated in practice. Results showed that the zero-cement brick with 0.35 W/B had the highest compressive strength, but the lowest absorption ratio. This absorption ratio of zero-cement brick with 0.35 W/B was lower than the required level determined by KS F 4004. Hence, to increase the absorption ratio, crushed fine aggregate (CA) and emulsified waste vegetable oil (EWO) were used in combination in the zero-cement brick. It was found that the zero-cement brick with CA of 20% and EWO of 1% had the optimum combination, in terms of having the optimum strength development (12 MPa) and the optimum absorption ratio (8.4%) that satisfies the level required by KS. In addition, it is demonstrated that for the manufacturing of zero-cement brick of 1000, this technique reduces the manufacturing cost by 5% compared with conventional cement brick.

ON THE 2-ABSORBING SUBMODULES AND ZERO-DIVISOR GRAPH OF EQUIVALENCE CLASSES OF ZERO DIVISORS

  • Shiroyeh Payrovi;Yasaman Sadatrasul
    • 대한수학회논문집
    • /
    • 제38권1호
    • /
    • pp.39-46
    • /
    • 2023
  • Let R be a commutative ring, M be a Noetherian R-module, and N a 2-absorbing submodule of M such that r(N :R M) = 𝖕 is a prime ideal of R. The main result of the paper states that if N = Q1 ∩ ⋯ ∩ Qn with r(Qi :R M) = 𝖕i, for i = 1, . . . , n, is a minimal primary decomposition of N, then the following statements are true. (i) 𝖕 = 𝖕k for some 1 ≤ k ≤ n. (ii) For each j = 1, . . . , n there exists mj ∈ M such that 𝖕j = (N :R mj). (iii) For each i, j = 1, . . . , n either 𝖕i ⊆ 𝖕j or 𝖕j ⊆ 𝖕i. Let ΓE(M) denote the zero-divisor graph of equivalence classes of zero divisors of M. It is shown that {Q1∩ ⋯ ∩Qn-1, Q1∩ ⋯ ∩Qn-2, . . . , Q1} is an independent subset of V (ΓE(M)), whenever the zero submodule of M is a 2-absorbing submodule and Q1 ∩ ⋯ ∩ Qn = 0 is its minimal primary decomposition. Furthermore, it is proved that ΓE(M)[(0 :R M)], the induced subgraph of ΓE(M) by (0 :R M), is complete.