• 한국대기환경학회지
• /
• 제13권1호
• /
• pp.91-98
• /
• 1997

Y-zeolite and ${\gamma}$-Al$_2$O$_3$ were used as supports on CO and $C_3$H$_{6}$ oxidation for diesel emission control. The catalysts composed of Pd and Pt as active components were wash coated on honeycomb type ceramic substrate. The oxidation of CO and $C_3$H$_{6}$ was carried out over prepared honeycomb in a fixed bed continuous reactor in the temperature range of 20$0^{\circ}C$~50$0^{\circ}C$ and 20,000 GHSV (h$^{-1}$ ). Surface area of Y-zeolite was larger than that of ${\gamma}$-Al$_2$O$_3$ due to channel structure of Y-zeolite. Therefore, high conversion of CO and $C_3$H$_{6}$ could be obtained because of good dispersion of active metals over Y-zeolite. The honeycomb used Y-zeolite as a support showed higher $C_3$H$_{6}$ conversion than that of ${\gamma}$-Al$_2$O$_3$ due to better cracking and isomerization activity of Y-zeolite. PdPt catalyst showed high conversion of CO and $C_3$H$_{6}$ at low temperature region, 20$0^{\circ}C$~30$0^{\circ}C$, for their synergy effects. PdPt/Y-Zeolite catalyst could achieve more than 80％ conversion of $C_3$H$_{6}$ at 30$0^{\circ}C$. The use of Y-zeolite as a support increased CO and $C_3$H$_{6}$ conversion, and decreased SO$_2$ conversion very effectively. Y-zeolite found to have a good adaptability as a support for the diesel emission after treatment system.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제26회 춘계학술대회논문집
• /
• pp.193-196
• /
• 2006

포화된 다중고리를 갖는 화합물의 endo-isomer 로부터 exe-isomer로의 이성화 반응에 대해 연구하였다. 강한 산점을 가지고 있다고 알려져 있는 제올라이트를 촉매로 사용하여 디시클로펜탄 계열의 endo-포화다중고리 화합물을 exe- 형태로 이성화 시켰다 제올라이트의 반응성은 제올라이트 세공의 크기와 제올라이트의 산점의 영향을 받음이 관찰되었다. 실리카와 알루미나의 비율이 낮아짐에 따라 반응성이 증가하였다. 염화알루미늄 촉매 반응의 경우가 제올라이트의 경우 보다 더 낮은 온도와 더 짧은 시간이 걸린다는 장점이 있었다. 그러나 환경적인 면과 취급의 용이성을 감안 할 때 제올라이트를 촉매로 사용할 수 있을 것이라 판단된다.

• 한국응용과학기술학회지
• /
• 제17권2호
• /
• pp.139-143
• /
• 2000

There appeared enhancements of the conversion of methane by adding a small amount of CO in the aromatization reaction of methane using the Mo-zeolite catalyst. In case of adding $CO_{2}$, $CO_{2}$ changed to CO first, and then the conversion reaction occurred. It was observed by using isotopes as reactants that CO is related to the aromatization reaction of methane.

• 산업기술연구
• /
• 제29권A호
• /
• pp.89-94
• /
• 2009

The efficiency of heterogeneous catalysts has been investigated in ozonation process for organic removal. Heterogeneous catalytic ozonation was conducted for the degradation of humic acid in the presence of Granular Activated Carbon or Zeolite as a solid catalyst. And the results were compared to those of ozonation alone and adsorption alone without ozonation. The degradation characteristics of humic acid in each process were examined with the values of pH, TOC, $UV_{254}$ and $COD_{Cr}$.

• 한국추진공학회지
• /
• 제18권5호
• /
• pp.95-100
• /
• 2014

극초음속 비행체에서는 공기와의 마찰열과 엔진열의 증가로 기체 내부의 열적 부하가 발생한다. 이는 비행체 내부 구조물의 변형을 일으키고 오작동을 발생시킬 수 있다. 흡열연료는 액체 탄화수소 연료로써 흡열반응을 통해 열을 흡수할 수 있는 연료이다. 본 연구에서는 exo-tetrahydrodicyclopentadiene을 모델연료로써 선정하고 제올라이트 촉매의 금속담지를 통하여 흡열특성의 변화를 측정하는 연구를 수행하였다. 이를 통하여 상용촉매보다 우수한 흡열성능을 가지는 촉매를 확보하였다. 본 연구의 목적은 흡열량 향상에 미치는 촉매의 특성을 연구하는 것이다. 이 촉매는 상용촉매를 대체하여 exo-THDCP를 흡열연료로 사용하는 시스템에 적용될 수 있을 것이다.

• Bulletin of the Korean Chemical Society
• /
• 제35권12호
• /
• pp.3576-3582
• /
• 2014

Zeolite-templated carbons (ZTCs), which have high specific surface area, were prepared by a conventional templating method using microporous zeolite-Y for catalyst supports in direct methanol fuel cells. The ZTCs were synthesized at different temperatures to investigate the characteristics of the surface produced and their electrochemical properties. Thereafter, Pt-Ru was deposited at different carbonization temperatures by a chemical reduction method. The crystalline and structural features were investigated using X-ray diffraction and scanning electron microscopy. The textural properties of the ZTCs were investigated by analyzing $N_2$/77 K adsorption isotherms using the Brunauer-Emmett-Teller equation, while the micro- and meso-pore size distributions were analyzed using the Barrett-Joyner-Halenda and Harvarth-Kawazoe methods, respectively. The surface morphology was characterized using transmission electron microscopy and inductively coupled plasma-mass spectrometry. The electrochemical properties of the Pt-Ru/ZTCs catalysts were also analyzed by cyclic voltammetry measurements. From the results, the ZTCs carbonized at $900^{\circ}C$ show the highest specific surface areas. In addition, ZTC900-PR led to uniform dispersion of Pt-Ru on the ZTCs, which enhanced the electro-catalytic activity of the Pt-Ru catalysts. The particle size of ZTC900-PR catalyst is about 3.4 nm, also peak current density from the CV plot is $12.5mA/cm^2$. Therefore, electro-catalytic activity of the ZTC900-PR catalyst is higher than those of ZTC1000-PR catalyst.

• 한국산학기술학회논문지
• /
• 제19권3호
• /
• pp.112-118
• /
• 2018

화석연료를 기반으로 하는 내연기관의 엄격한 배기가스규제를 충족시키기 위해 자동차와 선박용 후처리장치의 비중이 점차로 증가하고 있다. 디젤엔진은 $CO_2$ 배출량이 적고 강력한 파워와 연료의 경제성을 가지고 있으며, 상용차뿐만 아니라 승용차에서도 시장의 수요가 증가하고 있다. 디젤 연료 특성으로 인하여 질소산화물은 국부적인 고온연소 영역에서 생성되며, 입자상물질은 확산연소 영역에서 생성이 된다. LNT와 urea-SCR 촉매는 디젤엔진에서 NOx를 저감시키기 위한 후처리장치로 개발되어져왔다. 이 연구는 가혹해지고 있는 배기가스 규제 대응을 위해 소형과 중 대형 디젤기관에 많이 사용되고 있는 Cu SCR 촉매의 NOx 저감 성능 향상을 목적으로 한다. $5Cu-2ZrO_2$/Zeolyst(Si/Al=13.7)SCR 촉매는 $5Cu-2ZrO_2$/93Zeolite(Si/Al=2.9) 촉매에 비해 촉매온도 $300^{\circ}C$ 이상에서 약 5-50% 수준으로 de-NOx 성능이 높았다. Zeolite는 zeolyst에 비해 금속의 분산도가 낮고 평균 입경이 커짐에 따라 촉매의 반응속도가 저하되었다. 10wt% Cu가 담지된 $10Cu-2ZrO_2$/88Zeolyst 촉매는 $200^{\circ}C$에서 40%, $350^{\circ}C$에서 약 65%로 NOx 정화성능이 가장 높았고, Cu의 이온이 제올라이트의 결정화합물인 Al과의 이온교환율이 증가함에 따라 다른 촉매에 비해 20-40% de-NOx 성능이 향상되었다.

• Bulletin of the Korean Chemical Society
• /
• 제34권7호
• /
• pp.2073-2080
• /
• 2013

In this study the effects of adding alkaline-earth (IIA) metal oxides to NiZr-loaded Zeolite Y catalysts were investigated on hydrogen rich production by ethanol steam reforming (ESR). Four kinds of alkaline-earth metal (Mg, Ca, Sr, or Ba) oxides of 3.0% by weight were loaded between the $Ni_6Zr_4O_{14}$ main catalytic species and the microporous Zeolite Y support. The characterizations of these catalysts were examined by XRD, TEM, $H_2$-TPR, $NH_3$-TPD, and XPS. Catalytic performances during ESR were found to depend on the basicity of the added alkaline-earth metal oxides and $H_2$ production and ethanol conversion were maximized to 82% and 98% respectively in 27($Ni_6Zr_4O_{14}$)3MgO/70Zeolite Y catalyst at $600^{\circ}C$. Many carbon deposits and carbon nano fibers were seen on the surface of $30Ni_6Zr_4O_{14}$/70Zeolite Y catalyst but lesser amounts were observed on alkaline-earth metal oxide-loaded 27($Ni_6Zr_4O_{14}$)3MO/70Zeolite Y catalysts in TEM photos after ESR. This study demonstrates that hydrogen yields from ESR are closely related to the acidities of catalysts and that alkaline-earth metal oxides reduce the acidities of 27($Ni_6Zr_4O_{14}$)3MO/70Zeolite Y catalysts and promote hydrogen evolution by preventing progression to hydrocarbons.

• Bulletin of the Korean Chemical Society
• /
• 제34권11호
• /
• pp.3485-3487
• /
• 2013

• 한국분말재료학회지
• /
• 제3권3호
• /
• pp.153-158
• /
• 1996

The exhaust gas from vehicle engines and industrial boilers contains considerable amount of harmful nitrogen monoxide(NO) which causes air pollusion and acid rain. To remove NO catalytic reduction processes using Cu ion exchanged ZSM-5 zeolite have been widely studied. In this study, an attempt was made to fabricate Cu/zeolite catalyst by using high energy ball mill. The catalytic performance of ball milled Cu/ZSM-5 zeolites is analyzed and optimum copper contents was determined. The processing variables were reaction temperature and copper contents. Complete removal of NO gas was obtained at the temperature of 553 K on 10wt.% CU/ZSM-5 mechanically alloyed composite powders. Mechanically alloyed CU/ZSM-5 catalyst showed homogeneous distribution of Cu in ZSM-5.