• Journal of the Korea Organic Resources Recycling Association
• /
• v.28 no.3
• /
• pp.15-26
• /
• 2020

To recover phosphorus from incinerated sewage sludge ash(ISSA), ISSA were extracted with sulfuric acid solution, and the optimal phosphorus recovery conditions were experimented by comparing the recovered phosphorus contents and heavy metals by raising pH. Also the phosphorus recovery efficiency was compared when acid extract was reused or classified by particle size of ISSA. The optimal conditions for recovering phosphorus from ISSA were 1N sulfuric acid solution with an L/S ratio of 10, and an extraction time of 30 minutes. Considering the addition of alkali substances and the content of heavy metals in the recovered sediment, it is concluded to recover phosphorus under pH 5. Reuse of the ISSA extract increased the recovery rate of phosphorus by 14~21% depending on the reuse rate (100 and 50%), but it also increased zinc contents to 33 and 21%, and copper contents to 35 and 20%, respectively. The experiment of ISSA divided into four sections by particle size showed that there was no distinct advantage of phosphorous recovery by classification of certain particle size of ISSA. The removal of heavy metals from extracts through EDTA and cation exchange resin showed no definite effect.

• Nutrition Research and Practice
• /
• v.1 no.1
• /
• pp.29-35
• /
• 2007

Trace mineral studies involving metal ion chelators have been conducted in investigating the response of gene and protein expressions of certain cell lines but a few had really focused on how these metal ion chelators could affect the availability of important trace minerals such as Zn, Mn, Fe and Cu. The aim of the present study was to investigate the availability of Zn for the treatment of MC3T3-E1 osteoblast-like cells and the availability of some trace minerals in the cell culture media components after using chelexing resin in the FBS and the addition of N,N,N',N'-tetrakis-(2-pyridylmethyl)ethylenediamine (TPEN, membrane-permeable chelator) and diethylenetriaminepentaacetic acid (DTPA, membrane-impermeable chelator) in the treatment medium. Components for the preparation of cell culture medium and Zn-treated medium have been tested for Zn, Mn, Fe and Cu contents by atomic absorption spectrophotometer or inductively coupled plasma spectrophotometer. Also, the expression of bone-related genes (ALP, Runx2, PTH-R, ProCOL I, OPN and OC) was measured on the cellular Zn depletion such as chelexing or TPEN treatment. Results have shown that using the chelexing resin in FBS would significantly decrease the available Zn (p<0.05) $(39.4{\pm}1.5{\mu}M\;vs\;0.61{\pm}10.15{\mu}M)$ and Mn (p<0.05) $(0.74{\pm}0.01{\mu}M\;vs\;0.12{\pm}0.04{\mu}M)$. However, levels of Fe and Cu in FBS were not changed by chelexing FBS. The use of TPEN and DTPA as Zn-chelators did not show significant difference on the final concentration of Zn in the treatment medium (0, 3, 6, 9, $12{\mu}M$) except for in the addition of higher $15{\mu}M\;ZnCl_2$ which showed a significant increase of Zn level in DTPA-chelated treatment medium. Results have shown that both chelators gave the same pattern for the expression of the five bone-related genes between Zn and Zn+, and TPEN-treated experiments, compared to chelex-treated experiment, showed lower bone-related gene expression, which may imply that TPEN would be a stronger chelator than chelex resin. This study showed that TPEN would be a stronger chelator compared to DTPA or chelex resin and TPEN and chelex resin exerted cellular zinc depletion to be enough for cell study for Zn depletion.

• Korean Journal of Food Science and Technology
• /
• v.25 no.6
• /
• pp.769-774
• /
• 1993

Defatted rice bran was microparticulated using fluidized bed opposed jet mill and air-classified at different air classifying wheel speed (ACWS) in Turboplex classifier. The median particle size and the standard deviation decreased, and concomitantly the specific surface area increased generally with increasing ACWS. The protein, fat and ash contents of the recovered rice bran increased with ACWS. The contents of minerals; magnesium, zinc, iron and manganese; increased positively with ACWS. The phytic acid content, however, was slightly higher at middle ACWS. The dietary fiber content was highest in the ACWS 15,000 rpm fraction showing 31.47%. Higher ACWS resulted in lighter colored powder. The water holding capacity (WHC) showed the maximum value at ACWS 12,000 rpm and decreased with increasing ACWS, while the oil holding capacity (OHC) increased with ACWS. The rheological property of the microparticulated rice bran/water suspension fitted to the linear model. The yield stress and viscosity of the suspension increased with ACWS. The shape of microparticulated rice bran at ACWS 21,000 rpm was spherical, and the median particle size was $3.7{\mu}m$. When cake was prepared with substitution of microparticulated rice bran at 5%, the cake height and volume increased remarkably.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.4
• /
• pp.29-37
• /
• 2007

To evaluate the effect of carbonization temperature of charcoal on the heavy metal adsorption property, Quercus mongolica wood and Larix kaempferi bark powder (100~60 mesh) were carbonized at between 400 and $900^{\circ}C$ at intervals of $100^{\circ}C$. In the properties of carbonized materials which affect the adsorption ability, pH increased with increasing the carbonization temperature, so that the pHs of wood and bark charcoal carbonized at $900^{\circ}C$ were 10.8 and 10.4, respectively. Also, in both materials, the carbon content ratio became larger as the carbonization temperature was raised. At the same carbonization temperature, carbon content ratio of the bark charcoal tended to be greater than that of the wood charcoal. In case of iodine adsorption which indicates the adsorption property in liquid phase, the wood charcoal showed higher adsorption value than the bark charcoal. From the investigation of adsorptive elimination properties of the charcoals against 15 ppm Cd, Zn, and Cu, the higher the carbonization temperature, the greater elimination ratio was. In comparison, the wood charcoal presented higher elimination ratio than that of the bark charcoal. In the wood charcoals carbonized at higher than $500^{\circ}C$, especially, 0.2 g of the charcoal was enough to eliminated almost 100% of the heavy metal ions. Heavy metal ion elimination ratio of the charcoals depended on the kinds of adsorbates. The effectiveness of adsorbates in adsorptive elimination by the charcoals were in order of Cu > Cd > Zn. This is because the physicochemical interaction between the adsorbate and adsorbent affects their adsorption properties, it is considered that subsequent researches are needed to improve the effectiveness of heavy metal adsorption by the charcoals.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.43 no.2
• /
• pp.93-99
• /
• 2010

This study was conducted to prepare canned salmon frame and to characterize its food components. In the preparation of high-quality canned foods, the boiling water generated in the pre-heating process should be removed, and then the pre-treated canned salmon frame should be sterilized for an $F_0$ value of 12 min. The proximate composition of the canned salmon frame prepared under optimal conditions (CSFP) was 58.4% moisture, 15.7% protein, 21.4% lipid, and 3.5% ash. Based on the results of volatile basic nitrogen and microbiological tests, the CSFP was acceptable. The sensory score for the color of CSFP was 4.1 points, which was higher than that of commercial canned salmon frame (CCSF). However, there were no significant differences in the sensory scores for flavor and taste between CSFP and CCSF. The total amino acid content of CSFP was 14.58 g/100 g, which was 4.9% lower than that of CCSF. The major amino acids in CSFP were aspartic acid (11.0%), glutamic acid (14.8%), and lysine (10.6%), which accounted for 36.4% of the total amino acid content. The CSFP was high in calcium and phosphorus, while it was low in magnesium and zinc. The major fatty acids in CSFP were 16:0 (15.2%), 18:1n-9 (17.0%), 18:2n-6 (16.7%), 20:5n-3 (9.3%), and 22:6n-3 (8.8%). Based on the results, CSFP is a high-quality canned food in terms of hygiene and nutrition.

• Journal of Preventive Medicine and Public Health
• /
• v.26 no.1 s.41
• /
• pp.65-73
• /
• 1993

This study was carried out to evaluate the relationship between the biological lead exposure indices and air lead concentrations measured by personal air samplers. The 72 occupationally lead exposed workers were observed and the bioiogical lead Exposure indices chosen for this study were blood lead(PbB), urine lead(PbU), zinc protoporphyrin in whole blood(ZPP), $\delta$-aminolevulinic acid in urine(ALAU), $\delta$-aminolevulinic acid dehydratase activity (ALAD), coproporphyrin in urine(CPU) and hemoglobin(Hb). The workers were divided into four groups by air lead concentrations: Group I; under $0.05mg/m^3$, Group II; $0.05-0.10mg/m^3$, Group III; $0.10-0.15mg/m^3$ and Group IV; and over $0.15mg/m^3$. For evaluation the relationship between the biological lead exposure indices and air lead concentrations was used as correlation coefficients. The results obtained were as follows: 1. In Group I, II, III and IV, the mean value of PbB were $25.45{\pm}1.84{\mu}g/dl,\;27.87{\pm}3.53{\mu}g/dl,\;31.21{\pm}1.76{\mu}g/dl\;and\;47.02{\pm}13.96{\mu}g/dl$. Between Group IV and other groups showed statistically significant difference(p<0.05). 2. There was an increasing tendency of PbB, PbU, ALAU and ZPP according to the increase the mean air lead concentration, while ALAD has decreasing tendency. CPU and Hb did not show any constant tendency. 3. Correlation coefficients between PbB, PbU, ZPP, ALAU, ALAD, CPU, Hb and air lead concentration were 0.95, 0.83, 0.89, 0.72, -0.83, 0.51 and -0.45 respectively, and regression coefficient between PbB(Y) and PbA(X) was Y=126.8746X+16.9996(p<0.01).

• Journal of Plant Biotechnology
• /
• v.30 no.4
• /
• pp.399-403
• /
• 2003

In order to understand the protection effects of antioxidant enzymes against oxidative stress caused by various environmental stresses, transgenic tobacco (Nicotiana tabacum cv, Xanthi) plants expressing both copper/zinc superoxide dismutase (CuZnSOD) and ascorbate peroxidase (APX) in chloroplasts (referred to as CA plants) were subjected to highlight (1,100$\mu$mol m$^{-2}$ sec$^{-1}$) and chilling at 4$^{\circ}C$. The protection effects of CA plants using leaf discs were compared with those of transgenic plants expressing either CuZnSOD or APX in chloroplasts (SOD plants or APX plants, respectively) and non-transgenic (NT) plants. CA plants showed about 15％ protection in the photosynthetic efficiency (Fv/Fm) of photosystem II relative to NT plants 1 hr after treatment of both highlight and chilling, whereas they showed about 23％ protection in the redox state of P700 in photosystem I at 3 hr after treatment. SOD plants or APX plants showed an intermediate protection effect between CA plants and NT plants. These results demonstrated that the coexpression of CuZnSOD and APX in chloroplasts importantly involves in the protection effects against oxidative stress caused by various environmental stresses.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.15 no.1
• /
• pp.15-21
• /
• 1986

This study was conducted to research the industrial utilizaion of the maize germs separated in the manufacture of the cornstarch. The maize germs contained crude protein (25.3%) and crude fat (19.2%), with the 512 Kcal/100g of determined food energy values. It was found to have the valuable amounts of essential minerals, such as the content of calcium and phosphorus were low (53.0, 12.3mg%), while those of potassium (495.4mg%), magnesium (95.0mg%), zinc (48.3ppm) and manganese (45.2ppm) were plentiful. It was noted that the iodine value was 44.0, saponification value 292.3, acid value 1.5 and peroxide value about 3.3. The lipid fractions obtained by silicic acid column chromatography were mainly composed of neutral lipid, whereas, the contents of glycolipid and phospholipid were scarcely. The major fatty acids in total lipids were linoleic $(60{\sim}62.5%)$, oleic $(20{\sim}22.5%)$ and palmitic $(10{\sim}13.5%)$ acids. The content of the unsaturated fatty acids was more predominant than that of the saturated fatty acids. The content of the insoluble proteinous nitrogen (32.5%) was the most abundant. whereas, the contents of soluble proteinous nitrogen (12.7%) and peptide proteinous nitrogen (3.3%) were low. The major amino acids of the maized germs were glutamic, glycine, alanine and aspartic. It has been identified by the SDS-disc electrophoresis that the protein of maized germs had $5{\sim}6$ bands. Compared with standard substances, the molecular weight of the main protein was estimated to be $14,500{\sim}24,500$.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.4
• /
• pp.665-670
• /
• 2020

Buffer layer in CIGS thin-film solar cells improves energy conversion efficiency through band alignment between the absorption layer and the window layer. ZnS is a non-toxic II-VI compound semiconductor with direct-transition band gaps and n-conductivity as well as with excellent lattice matching for CIGS absorbent layers. In this study, the structural and optical properties of ZnS thin films, deposited by RF magnetron sputtering method and subsequently performed by the rapid thermal annealing treatment, were investigated for the buffer layer. The zincblende cubic structures along (111), (220), and (311) were shown in all specimens. The rapid thermal annealed specimens at the relatively low temperatures were polycrystalline structure with the wurtzite hexagonal structures along (002). Rapid thermal annealing at high temperatures changed the polycrystalline structure to the single crystal of the zincblende cubic structures. Through the chemical analysis, the zincblende cubic structure was obtained in the specimen with the ratio of Zn/S near stoichiometry. ZnS thin film showed the shifted absorption edge towards the lower wavelength as annealing temperature increased, and the mean optical transmittance in the visible light range increased to 80.40% under 500℃ conditions.

• Resources Recycling
• /
• v.26 no.2
• /
• pp.56-65
• /
• 2017

This study is an experimental study on the corrosion protection performance according to the configuration ratio of the Zn and Al. A metal spraying was used as the arc metal spraying method, a specimen was produced by varying the proportion ratio and coating thickness of the Zn and Al. Experimental methods visually observed to corrosion of the specimen for 1, 3, 7, 15 days was conducted in accordance with the CASS salt spray test. This study has confirmed that the performance of the corrosion protection improved against the increase in the Al content. Further, it was confirmed that excellent perfomance is exhibited when the coating thickness is secured over $80{\mu}m$. In addition, the SEM analysis was performed to observe the cross-sectional shape of the metal spraying specimen after CASS testing. The analysis result showed that the deterioration of the metal spraying coating layer was reduced as the Al content increases.