• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.4 no.4
• /
• pp.363-369
• /
• 1994

Bimuth telluride base thermoelectrics are prepared by AC current applied hot pressing method. It is possible to minimize the defects arising from the vaporization of Te, thanks to the very short processing time compared to the single crystal growing method. The optimum conditions for the AC applied hot pressing of 95 mol% $Bi_2Te_3-5 mol% Bi_2Se_3$ thermoelectrics are sintering at $400^{\circ}C$, for 2 minutes, under 1500 kgf/$\textrm{cm}^2$, with the particle size of $125 to 250 {\mu}m$, range of powder. The resultant Z value (figure of merit) was $2.2{\times}10^{-3}/K$.

• Korean Journal of Environmental Biology
• /
• v.33 no.1
• /
• pp.63-74
• /
• 2015

The purpose of this study is to provide the basis information for ecological conservation and restoration of Jangdo wetland conservation area through the survey of vegetation diversity and spatial distribution characteristics. Syntaxonomic account of plant communities were carried out field survey by Z.-M. school method at 14 sites and relationship analysis between plant community and environment variables with Principal Coordinate Analysis (PCoA). Based on the floristic composition, all the plots were classified into xeric and hydric type and arranged in seven plant communities. Spatial distribution of plant communities is determined primarily by the soil moisture condition and amount of organic matter. Hydric vegetation is around 8% ($7,337m^2$) of the protected area and distributed swamp forest of dominating willows under 18 years. Proliferation of willows are recognised extended from edge to centre after in 1990's caused by fallow and control of livestock grazing on wetland. Jangdo wetland will have to readjust the protection boundary because wet meadow zone and swamp forest have been distributed outside the protection area.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.1
• /
• pp.132-135
• /
• 2005

The purpose of this study was to propose the modified strip crown technique for esthetic restoration of primary anterior teeth using glass fibers. Celluloid crown form(3M, USA), Z100(P shade, 3M, USA). Aeliteflo(Bisco Inc., USA), and Clearfil SE Bond(Kuraray Medical Inc., Japan) were used for this technique. Mesh type of glass fiber(TESCERA Fiber Mesh, Bisco Inc, USA) was used for reinforcing material. After trimming the celluloid crown form, resin adhesive and flowable resin were applied on the pre-shaped glass fiber mesh. That mesh was placed on the lingual surface of inside of celluloid crown form and followed by light activation. Composite resin was filled into the celluloid crown form and put it on a prepared tooth and then light activated and finished the margin. The new modified strip crown technique can provide esthetics and increased durability for restoration of primary anterior teeth.

• Journal of the Korean Chemical Society
• /
• v.32 no.4
• /
• pp.297-300
• /
• 1988

Ammonium p-methylbenzenesulfonate, $C_7H_11NO_3S$, Mr = 189.23, orthorhombic, space group $Pna2-1$, a = 20.406(4), b = 6.271(1), c = 7.067(2)${\AA}$, V = 904.19 ${\AA}^3$, Z = 4, $D_x$ = 1.39, $D_m =1.38g{\cdot}cm^{-3}$, ${\lambda}(M_o K_{\alpha})$ = 0. 71069 ${\AA}$, ${\mu}=3.1 cm^{-1}$, T = 298K, F(000) = 400, final R = 0.057 for 994 unique observed reflections with I > $16{\sigma}(I)$. The methylbenzene portion including the sulfur atom is nearly planar. Between the $SO_3$ groups and the ammonium ion, there are three unique hydrogen bonds; two of which make the anions linked along the c-axis and the remaining one along the b-axis. These hydrogen bonds make two-dimensionally hydrogen-bonded molecular layers. Among these hydrophilic layers, the methylbenzene moieties cluster together to form hydrophobic layers.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.10a
• /
• pp.252-256
• /
• 2002

본 연구에서는 유리섬유/나일론 6 복합재료의 계면특성에 미치는 실란계 사이징제의 영향을 조사하기 위하여 microbonding test, short-beam shear test 그리고 dynamic mechanical analysis 방법을 사용하였다. 전자의 미시적인 방법과 후자의 두 가지 거시적인 접근 방법으로부터 얻은 유리섬유/나일론 6 복합재료의 계면특성에 대한 결과가 서로 일치하였다. 상업적으로 사이징 처리된 경우와 비교할 때, 본 연구에 적용된 네 종류의 실란계 사이징제는 유리섬유-나일론 6 수지의 계면결합력을 크게 향상시켰다. 특히, 3-chloropropyltrimethoxysilane (Z-6076)의 사용은 유리섬유/나일론 6 복합재료의 계면전단강도와 층간전단강도를 가장 두드러지게 증가시켰다.

• Analytical Science and Technology
• /
• v.28 no.5
• /
• pp.323-330
• /
• 2015

Alkaptonuria, a rare inherited metabolic disease, is characterized by a lack of homogentisate dioxygenase and accumulation of homogentisic acid (HGA), leading to homogentisic aciduria, arthritis, and ochronosis. In this study, a rapid analytical method, without an expensive and tedious solid phase extraction step, was developed to quantify HGA in plasma using GC-MS. HGA-spiked pooled plasma samples were subjected to liquid-liquid extraction (LLE) with ethyl acetate, followed by trimethylsilyl derivatization (TMS) and GC-MS quantification using selected ion monitoring. The formation of TMS derivative of the 1 carboxylic and 2 hydroxyl functional groups was performed by reacting BSTFA (with 10% TMCS) for 5 min at 80 ℃. For selected ion monitoring, quantification and confirmation ions were determined based on specific ions (m/z 384, m/z 341 and m/z 252) of the TMS derivative of HGA. Calibration curves of pooled normal plasma specimens showed a linear relationship in the range of 1-100 ng/µL. The precision and accuracy were within a relative standard deviation (RSD) of 1 to 15% and a bias of -5 to 25%. Recoveries were obtained in the range of 99-125% and 95-115% for intra-day and inter-day assay, respectively, at 2, 20 and 80 ng/µL. The limit of detection (LOD) and limit of quantification (LOQ) were 0.4 ng/µL and 4 ng/µL, respectively. No homogentisic acid was excreted from normal Korean plasma samples. Collectively, the results from the present study suggest that this method could be useful for routine diagnosis and therapeutic monitoring of alkaptonuria patients with excellent sensitivity and rapidity.

• Restorative Dentistry and Endodontics
• /
• v.32 no.4
• /
• pp.377-384
• /
• 2007

Present tooth bonding system can be categorized into total etching bonding system (TE) and self-etching boding system (SE) based on their way of smear layer treatment. The purposes of this study were to compare the effectiveness between these two systems and to evaluate the effect of number of themocycling on microleakage of class V composite resin restorations. Total forty class V cavities were prepared on the single-rooted bovine teeth and were randomly divided into four experimental groups: two kinds of bonding system and another two kinds of thermocycling groups. Half of the cavities were filed with Z250 following the use of TE system, Single Bond and another twenty cavities were filled with Metafil and AQ Bond, SE system. All composite restoratives were cured using light curing unit (XL2500, 3M ESPE, St. Paul, MN, USA) for 40 seconds with a light intensity of $600mW/cm^2$. Teeth were stored in distilled water for one day at room temperature and were finished and polished with Sof-Lex system. Half of teeth were thermocycled 500 times and the other half were thermocycled 5,000 times between $5^{\circ}C$ and $55^{\circ}C$ for 30 second at each temperature. Teeth were isolated with two layers of nail varnish except the restoration surface and 1 mm surrounding margins. Electrical conductivity (${\mu}A$) was recorded in distilled water by electrochemical method. Microleakage scores were compared and analyzed using two-way ANOVA at 95% level. From this study, following results were obtained: There was no interaction between variables of bonding system and number of thermocycling (p = 0.485). Microleakage was not affected by the number of thermocycling either (p = 0.814). However, Composite restoration of Metafil and AQ Bond, SE bond system showed less microleakage than composite restoration of Z250 and Single Bond, TE bond system (p = 0.005).

• Analytical Science and Technology
• /
• v.25 no.1
• /
• pp.76-82
• /
• 2012

The determination and confirmation of dutasteride in human serum was performed by a liquid chromatography-electrospray ionization tandem mass spectrometry (LC-ESI/MS/MS). Beclomethasone as an internal standard (I.S.) was added to the serum and the mixed sample was pretreated by liquid-liquid extraction (LLE) with methyl tert-butyl ether (MTBE). The mass transitions of dutasteride and I.S. monitored in multiple reaction monitoring (MRM) were m/z 529.6${\rightarrow}$461.5 and m/z 409.3${\rightarrow}$391.2, respectively, and the retention times were 6.45 and 5.46 min, respectively. The calibration curve was linear in the concentration range of 0.5~30.0 ng/mL ($R^2$= 0.9999) and the limit of quantitation (LOQ) was found to be 0.5 ng/mL. The recovery of dutasteride was shown to be 66~72%. The intra-day assay precision and accuracy were in the range 3.5~5.5% and 85.7~89.9%, respectively, and the interday assay precision and accuracy were in the range 4.2~5.8% and 90.8~95.8%, respectively.

• Korean journal of applied entomology
• /
• v.59 no.3
• /
• pp.217-231
• /
• 2020

In 2019, the sex pheromones of Spodoptera frugiperda were used to examine moth trapping in cornfields in Gochang, Korea. Four types of traps were prepared, two funnel-types and two delta-types, each baited with 300 or 1000 ㎍ of a two-component (2C) blend of synthetic sex pheromones [100% (Z)-9-tetradecenyl acetate (Z9-14Ac) and 2% (Z)-7-dodecenyl acetate (Z7-12Ac)]. The greatest number of S. frugiperda were captured in the 300 ㎍ funnel-type trap (first catch: August 6). Large numbers of Mythimna loreyi (a non-target) were also caught in the funnel-type traps. Two wing-type traps were baited with 1000 ㎍ of the 2C blend or a four-component (4C) blend [100% (Z)-9-tetradecenyl acetate, 8% (Z)-11-hexadecenyl acetate (Z11-16Ac), 2% (Z)-7-dodecenyl acetate, and 1% (Z)-9-dodecenyl acetate (Z9-12Ac)] and the capture efficiency was assessed. Low numbers of S. frugiperda were captured regardless of the blend, and more M. loreyi were captured using the 4C blend. The two intraspecies groups clustered separately in a phylogenetic tree constructed using partial sequences (1004 bp) of cytochrome c oxidase subunit 1 (CO1). Of the 70 S. frugiperda captured in the pheromone traps, 66 belonged to CO1-RS (CO1 rice-strain) and 4 to CO1-CS (CO1 corn-strain). Twelve consistent single nucleotide polymorphisms (SNPs) were identified in CO1 between the CO1-RS and CO1-CS groups of S. frugiperda. Of the 73 S. frugiperda, 4 had the same SNP pattern as the CO1-CS group (including the corn strain) and 69 had the same SNP pattern as the CO1-RS group (including the rice strain).

• Journal of the Earthquake Engineering Society of Korea
• /
• v.9 no.3 s.43
• /
• pp.51-58
• /
• 2005

Many RC building structures of multiple uses constructed in Korea have the Irregularities of torsion and soft story at bottom stories simultaneously. Seismic design codes generally require dynamic analysis and to take into account the effect or earthquake excitations in the orthogonal direction using the approximate methods of 100/30 and SRSS for type of building structures. And ail buildings should be designed to be safe in any direction of earthquake input. But, most of designers have difficulty in considering the orthogonal and directional effect of earthquake. The objective of the study stated herein is to verily 1) the effect of the choice of the reference axes on the seismic design member forces by comparing the analytical results on member forces using the principal axes suggested by Wilson and the global axes generally adopted in design office, 2) the validity or the 100/30 and SRSS methods by comparing the member forces obtained through linear elastic time history analysis with those obtained through using response spectrum analysis and 100/30 (or SRSS) methods. Based on the observations on the analytical results, it is concluded as follows; 1) The values of member forces by principal axes can be about $15\%$ smaller than those by the global axes in the example structure. 2) Though the values of member forces given by time history analysis are generally within the peak values predicted by 100/30 and SRSS methods, many member force vectors $(P,\;M_y,\;and\;M_z)$ by lime history analysis were located outside the boundaries predicted by the approximate method such as the 100/30 method.