• Korean journal of applied entomology
• /
• v.59 no.4
• /
• pp.333-339
• /
• 2020

Pheromone-based techniques are becoming a viable strategy of insect pest management as facilitated by the exponential increase in numbers of pheromone identifications from many insect pests. This is the report on the efficacy of pheromone-mediated chemical communication disruption (PCD) technique against the Korean population of smaller clearwing moths, Synanthedon tenuis (Butler) (Lepidoptera: Sesiidae) using its female sex pheromone component, (Z, Z)-3, 13-octadecadien-1-ol. The PCD trials were carried out four times during 2016 and 2017 in persimmon orchards located at Suncheon and Jinju Cities in Korea, and the PCD efficacy was expressed as the mean differences in the seasonal catches of S. tenuis males in the PCD and control plots. The seasonal male moth catches in monitoring traps installed in the PCD plots were significantly lower as compared with those installed in the control plots. Consequently, the PCD efficacy in the experimental orchards ranged from 95.2-100% with an average efficacy of 98.8 ± 1.2%, revealing a future possibility of pheromone-based management of S. tenuis.

• Korean Journal of Microbiology
• /
• v.36 no.1
• /
• pp.52-57
• /
• 2000

A method for quantitative and qualitative analysis of geosmin, odorant produced by several actinomycetes and cyanobacteria, was established and optimized. The effects of environmental conditions on the growth of Phormidium sp. NIVA-CYA7 were examined and the production and release of geosmin by the species was analyzed by using the purge and trap-gas chromatographic technique. One of the major advantages of the technique established in the present study is that the preparation of sample is simpler and purge time is shorter. Under the culture conditions (pH 7.9, $20^{\circ}C$, 120-140 $\mu$E/$m^2$/s and Z8 medium), Phormidium showed growth characteristics with a lag phase for 8 days and an exponential phase for 14 days followed by a stationary phase. Reduction of inorganic nitrogen concentrations in the culture medium from 250 to 100 or 25 $\mu$M brought no significant effect on the cell growth. However, the cell growth was significantly inhibited with decreasing concentrations of inorganic phosphorus from 25 to 10 or 2.5 $\mu$M. When the inorganic phosphorus concentration in the medium was lowered from 25 to 10 $\mu$M, the levels of geosmin in the organism expressed as percentages per unit TOC and chlorophyII-$\alpha$ increased by 35% and 68%, respectively. When the initial pH of the medium was 9.4, geosmin content was 0.0824 $\mu$g/mg C, which was 2-fold higher than that at pH 7.9 Consequently, the level of geosmin in Phormidium was found to vary with growth phases of the culture, external inorganic phosphorus concentration and external pH, while the release of geosmin was not significantly affected by the factors.

• Restorative Dentistry and Endodontics
• /
• v.28 no.5
• /
• pp.402-408
• /
• 2003

This study was done to present a criterion in selection of the most proper light sources and materials by measuring metamerism index(MI) of the light curing composite resins with spectrocolorimeter. Metamerism is defined when two objects appear to be the same color in one illuminant but different in another. This is due to the fact that they have different spectral curves that fail to match under the second illuminant. In this study, A1 & A3 shade of five light curing composite resins (Esthet-X, Filteck Z250, Filteck A110. Charisma. Vitalescence) were chosen based on Vita shade. Five samples were made for shade of each product with Teflon mold (diameter: 15mm, thickness: 2mm). Metamerism index of each samples on a Barium sulfate plate($L^{*}=96.54,{\;}a^{*}=0.19,{\;}b^{*}=0.01$) prepared for sample fixation were measured with spectrocolorimeter(Miniscan XE plus. Model 4000s. Hunter Lab. USA) by applying standard light source D^{65}, C. Fcw, TL84 and A. Standardization was done with reference standard(X=80.8, Y=85.7, Z=90.8) and light trap. The results were as follows. 1. Different resins with same Vita shade showed recognizable color difference (${\delta}E^{*}>2$). 2. All composites had MI below accepted value 0.5 between standard illuminant(D$_{65}$, C, & A) and below 1.5 under fluorescent condition (Fcw & TL84). 3. MI value between $D^{65}$ and A showed higher value than MI value between other source of light(p<0.01). 4. All resins except Z250 showed MI value that A3 is higher than A1 between $D^{65}$ and A(p<0.05).except Z250 showed MI value that A3 is higher than A1 between $D^{65}$ and A(p<0.05).

• Journal of Ecology and Environment
• /
• v.39 no.1
• /
• pp.43-49
• /
• 2016

Fishways are constructed to provide longitudinal connectivity of streams or rivers where their flow has been altered by in-stream structures such as dams or weirs. Nature-like fishways have an additional function of providing fish habitats. In the study, we estimated the role of a nature-like fishway (length: 700 m, slope: 1/100) for fish habitat by using two dominant species in the Sangju Weir, Nakdong River, to calculate the optimal ecological flow rate using Physical HABitat SIMulation (PHABSIM). To identify the dominant species that used the fishway, we conducted trap monitoring from August to November 2012 at the fishway exit. The dominant species were Zacco platypus and Opsariichthys uncirostric amurensis with a relative abundance of 62.1% and 35.9%, respectively. Optimal habitat suitability indices (HSIs) for Z. platypus and O. u. amurensis were calculated as 0.6-0.8 m/s (water velocity) and 0.2-0.4 m (water depth), and 0.5-0.7 m/s (water velocity) and 0.1-0.3 m (water depth), respectively. The optimal ecological flow rates (OEFs) for Z. platypus and O. u. amurensis were 1.6 and 1.7 cubic meter per second (CMS), respectively. The results of the study can be used in a management plan to increase the habitat function of nature-like fishways in the Sangju Weir. This methodology can be utilized as an appropriate tool that can determine the habitat function of all nature-like fishways.

• Korean journal of applied entomology
• /
• v.48 no.1
• /
• pp.73-79
• /
• 2009

Male adults of bean bug, Riptortus clavatus Thunberg (Heteroptera: Alydidae), release aggregation pheromone (AP) which consists of (E)-2-hexenyl (Z)-3-hexenoate (E2HZ3H), (E)-2-hexenyl (E)-2-hexenoate (E2HE2H), and tetradecyl isobutyrate (TI). Variation in the pheromonal secretion were checked by the factors of age, mating status, seasons, body weight and time in a day. There were no significant differences in the amounts of AP secretion by mating, body weight, and time in a day. Higher amount of AP was detected from older males than younger ones. The amount of AP detected was higher in the males collected from April to September than in those collected during October. No AP was detected in the males of November and December. These phenomena in the AP secretion were discussed in relation to food exploitation and reproductive diapause of the bean bug.

• Journal of Life Science
• /
• v.13 no.3
• /
• pp.308-313
• /
• 2003

The collagenase gene from Vibrio parahaemolyticus 04 was subcloned into an expression vector pET-29b. The recombinant collagenase was expressed in Escherichia coli BL2l(DE3) and partially purified by Hi-Trap affinity and Sephacryl S-100 size exclusion chromatographies. The recombinant enzyme was purified by 43.7-fold and the yield was 73%. SDS-PAGE revealed that the molecular weight of the enzyme was approximately 35 kDa. Substrate specificity study of the enzyme displayed that the enzyme showed the highest activity with the type I collagen and the synthetic peptide, Z-GPGGPA, indicating that the enzyme was indeed a collagenase. The enzyme showed broad pH optimum around pH 6-12 and was stable between pH 5.5 and 11.5. The optimum temperature for the type I collagen degradation was $35^{\circ}C$. The thermostability measurement of the enzyme indicated that the enzyme was stable up to $55^{\circ}C$, but the activity was diminished quickly above $60^{\circ}C.$

• Journal of IKEEE
• /
• v.27 no.4
• /
• pp.556-560
• /
• 2023

In this study, the impact of Nitrogen implantation process on deep-level defects and lifetime in 4H-SiC Epi surfaces was comparatively analyzed. Deep Level Transient Spectroscopy (DLTS) and Time Resolved Photoluminescence (TR-PL) were employed to measure deep-level defects and carrier lifetime. As-grown Schottky Barrier Diodes (SBDs) exhibited energy levels at 0.16 eV, 0.67 eV, and 1.54 eV, while for implantation SBD, defects at 0.15 eV were observed. This indicates a reduction in defects associated with energy levels Z_1/2 and EH_6/7, known as lifetime killers, as impurities from nitrogen implantation replace titanium and carbon vacancies.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.14-14
• /
• 2009

In this study, we investigated the effects of Cr dopant on the bulk trap level and grain boundary characteristics of $Bi_2O_3$-based ZnO (ZB) using dielectric functions such as $Z^*$, $Y^*$, $M^*$, ${\varepsilon}^*$, and $tan{\delta}$. More than two bulk traps of $Zn_i$ and $V_o$ probably in different ionization states could be identified in ZBCr($ZnO-Bi_2O_3-Cr_2O_3$). The grain boundaries of ZBCr could be electrochemically divided into two types: sensitive to ambient oxygen and thus electrically active one and oxygen-insensitive and thus electrically inactive one.

• Corrosion Science and Technology
• /
• v.5 no.4
• /
• pp.117-122
• /
• 2006

Hydrogen permeation measurements have been carried out on API X65 grade linepipe steel. In order to study the effect of steel microstructure on hydrogen diffusion behavior in linepipe steel, the accelerated cooling condition was applied and then three different kinds of microstructures were obtained. Hydrogen permeation measurement has been performed in reference to modified ISO17081 (2004) and ZIS Z3113 method. Hydrogen trapping parameters in these steels were evaluated in terms of the effective diffusivity ($D_{eff}$), permeability ($J_{ss}L$) and the amount of diffusible hydrogen. In this study, microstructures which affect both hydrogen trapping and diffusion were degenerated pearlite (DP), acicular ferrite (AF), bainite and martensite/austenite constituents (MA). The low $D_{eff}$ and $J_{ss}L$ mean that more hydrogen can be trapped reversibly or irreversibly and the corresponding steel microstructure is dominant hydrogen trapping site. The large amount of diffusible hydrogen means that corresponding steel microstructure is predominantly reversible. The results of this study suggest that the hydrogen trapping efficiency increases in the order of DP, bainite and AF, while AF is the most efficient reversible trap.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09a
• /
• pp.90-93
• /
• 2003

The function, which represents the closed curve, is found from the sampling data by S-System in this study. Two methods are proposed. One is the extension of S-System. The data x and y are regarded as input data, and the data z=0 as output data. To avoid the trap into the invalid function, the judgment points (x$\_$j/, y/sug j/) are introduced. They are arranged in the inside and the outside of the closed curve. By introducing this concept, the functions representing closed curve are found by S-System. This method is simple because of a little extension of S-System. It is, however, difficult for the method to find the complex function like a hand-written curve. Then another method is also proposed. It uses the system incorporating the argument function. The closed curve can be expressed by the argument function. The relatively complex function, which represents the closed curve like a hand-written curve, is found by utilizing argument function.