• The Journal of Korean Academy of Prosthodontics
• /
• v.32 no.1
• /
• pp.120-147
• /
• 1994

This study was performed for the purpose of evaluating the stress distribution around threaded type implants, cylindrical type implants and teeth connected with rigid or non-rigid connector. The stress distribution around the surrounding bone was analyzed by three-dimensional photoelastic method. Twelve mandibular photoelastic epoxy resin models and a circular polariscope were used to record the isochromatic fringes. After the stress distribution around the implant and tooth was observed, the results were as follows ; 1. In threaded type implants, stress concentrated patterns were observed at the neck either vertical or 25 degree lateral force. 2. The stress concentrated patterns were observed at the tooth apical portion and neck portions of the implant and tooth when a threaded implant was connected with the tooth by either a rigid or non-rigid connector. More force was generated at the tooth neck portion by a rigid connector and more force at the implant neck portion by a non-rigid connector. 3. The stress concentrated patterns were observed at the apical portion of the implant and tooth when a cylindrical type ,implant was connected with the tooth either by a rigid or non-rigid connector. More force was generated at the tooth apical portion by a rigid connector and more force at the neck portion of the tooth and implant by a non-rigid connector. 4. The stress around the tooth was more equally distributed in a threaded type implant than in a cylindrical implant when the tooth was connected with either a rigid or non-rigid connector. 5. The stress around a threaded type implant was progressively more equally distributed in the following order : 1) when used a single implant, 2) a non-rigid connection with the implant and tooth, 3) a rigid connection with the implant and tooth, 4) a rigid connection with two implant fixtures.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.38 no.3
• /
• pp.244-249
• /
• 2011

This in vitro study compared the remineralization of incipient interproximal caries in the presence of three glass ionomer cements(highly-filled glass ionomer cement, resin-modified glass ionomer cement, compomer) and a resin composite(control). Thirty-two extracted premolars were selected based upon the lack of any visible demineralization. The teeth were coated in a transparent acid resistant nail varnish leaving $3{\times}3$ mm square. The teeth were subjected to the demineralizing buffer for 3 days and quantitative light-induced fluorescence(QLF) images of the subjects were taken. Proximal restoration was simulated by placing tooth specimens and the various glass ionomer cements in closed containers with artificial saliva at $37^{\circ}C$ and pH 7.0 with constant circulation. Further QLF images were subsequently taken at 30, 60, and 90 days. The changes of mineral loss(${\Delta}Q$) were evaluated by QLF and the change of ${\Delta}Q$(${\Delta}{\Delta}Q$) were compared between groups in order to evaluate the effects of remineralization. All data were analyzed using ANOVA and the post-HOC Dunnett C multiple comparison test at p<0.05. While ${\Delta}Q$(changes of mineral loss) increased for all treatments, the increases for three glass ionomer groups were significantly higher than that for the resin group at first month period. As time went on, the amount of ${\Delta}{\Delta}Q$ decreased.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.3
• /
• pp.498-503
• /
• 2006

This in vitro study compared the remineralization of incipient interproximal caries in the presence of three glass ionomer cements (highly-filled glass ionomer cement, compomer, resin-modified glass ionomer cement) and a resin composite(control). The long-term changes in remineralization caused by each material were evaluated by microtomography. Proximal restoration was simulated by placing tooth specimens and the various glass ionomer cements in closed containers with artificial saliva at $37^{\circ}C$ and pH 7.0 for 30 days with constant circulation Tomographic images were obtained with a micro CT scanner at 90, 180, and 270 days, and density-measuring software was used to calculate the micro-density of artificial caries lesions in the specimens. The mean density changes were compared between groups in order to evaluate the effects of remineralization. All data were analyzed using one-way ANOVA and the post-HOC Tukey multiple comparison test at p<0.05. While the density of artificial caries lesions increased for all treatments, the increases for the three glass ionomer groups were significantly higher than that for the resin group in each three month period. As time went on, the amount of density increase of the glass ionomer groups decreased, and significant differences were found between the remineralization effects of the glass ionomer groups.

• Progress in Medical Physics
• /
• v.16 no.2
• /
• pp.62-69
• /
• 2005

The purpose of this study has been performed to investigate the possibility of external audit program using thermoluminescence dosimetry for electron beam in korea. The TLD system consists of LiF powder, type TLD-700 read with a PCL 3 reader. In order to determine a calibration coefficient of the TLD system, the reference dosimeters are irradiated to 2 Gy in a $^{60}CO$ beam at the KFDA The irradiation is performed under reference conditions is water phantom using the IAEA standard holder for TLD of electron beam. The energy correction factor is determined for LiF powder irradiated of dose to water 2 Gy in electron beams of 6, 9, 12, 16 and 20 MeV (Varian CL 2100C). The dose is determined according to the IAEA TRS-398 and by measurement with a PTW Roos type plane-parallel chamber. The TLD for each electron energy are positioned in water at reference depth. In this study, to verify of the accuracy of dose determination by the TLD system are performed through a 'blind' TLD irradiation. The results of blind test are $2.98\%,\;3.39\%\;and\;0.01\%(1\sigma)$ at 9, 16, 20 MeV, respectively. The value generally agrees within the acceptance level of $5\%$ for electron beam. The results of this study prove the possibility of the TLD quality assurance program for electron beams. It has contributed to the improvement of clinical electron dosimetry in radiotherapy centers.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.5
• /
• pp.97-104
• /
• 2017

Greenspace enlargement through proper landscape planting is essential to creating a low carbon society. This study analyzed changes in stem diameter growth rates(DGR), ratios of below ground/above ground biomass(B/A), and carbon sequestration by age of major landscape tree species. Landscape trees for study were 11 species and 112 individuals planted in middle region of Korea. The DGR and B/A were analyzed based on data measured through a direct harvesting method including root digging. The carbon sequestration by tree age was estimated applying the derived regression models. The annual DGR at breast height of trees over 30 years averaged 0.72 cm/yr for deciduous species and 0.83 cm/yr for evergreen species. The B/A of the trees over 30 years averaged 0.23 for evergreen species and 0.40 for deciduous species, about 1.7 times higher than evergreen species. The B/A by age in this study did not correspond to the existing result that it decreased as tree ages became older. Of the study tree species, cumulative carbon sequestration over 25 years was greatest with Zelkova serrata(198.3 kg), followed by Prunus yedoensis(121.7 kg), Pinus koraiensis(117.5 kg), and Pinus densiflora (77.4 kg) in that order. The cumulative carbon sequestration by Z. serrata offset about 5% of carbon emissions per capita from household electricity use for the same period. The growth rates and carbon sequestration for landscape trees were much greater than those for forest trees even for the same species. Based on these results, landscape planting and management strategies were explored to improve carbon sequestration, including tree species selection, planting density, and growth ground improvement. This study breaks new ground in discovering changes in growth and carbon sequestration by age of landscape trees and is expected to be useful in establishing urban greenspaces towards a low carbon society.

• Progress in Medical Physics
• /
• v.17 no.2
• /
• pp.105-113
• /
• 2006

This study peformed to confirm the corrected dose In different electron density materials using the superposition/FFT convolution method in radiotherapy Planning system. The experiments of the $K_2HPO_4$ diluted solution for bone substitute, Cork for lung and n-Glucose for soft tissue are very close to effective atomic number of tissue materials. The image data acquisited from the 110 KVp and 130 KVp CT scanner (Siemes, Singo emotions). The electron density was derived from the CT number (H) and adapted to planning system (Xio, CMS) for heterogeneity correction. The heterogeneity tissue phantom used for measurement dose comparison to that of delivered computer planning system. In the results, this investigations showed the CT number is highly affected in photoelectric effect in high Z materials. The electron density in a given energy spectrum showed the relation of first order as a function of H in soft tissue and bone materials, respectively. In our experiments, the ratio of electron density as a function of H was obtained the 0.001026H+1.00 in soft tissue and 0.000304H+1.07 for bone at 130 KVp spectrum and showed 0.000274H+1.10 for bone tissue in low 110 KVp. This experiments of electron density calibrations from CT number used to decide depth and length of photon transportation. The Computed superposition and FFT convolution dose showed very close to measurements within 1.0% discrepancy in homogeneous phantom for 6 and 15 MV X rays, but it showed -5.0% large discrepancy in FFT convolution for bone tissue correction of 6 MV X rays. In this experiments, the evaluated doses showed acceptable discrepancy within -1.2% of average for lung and -2.9% for bone equivalent materials with superposition method in 6 MV X rays. However the FFT convolution method showed more a large discrepancy than superposition in the low electron density medium in 6 and 15 MV X rays. As the CT number depends on energy spectrum of X rays, it should be confirm gradient of function of CT number-electron density regularly.

• Journal of Science Education
• /
• v.32 no.1
• /
• pp.33-46
• /
• 2008

The purpose of this study was to know whether or not any wrongful description or simple errors were in photosynthesis unit of Biology II textbook under 7th national curriculum and if so, to know whether or not high school teachers recognized and corrected properly the mistakes. The mistakes in photosynthesis unit of text books were determined by the comparison with several reference books and through examination by three plant physiologists in 8 different Biology II textbooks. After the mistakes were analysed, the survey using contents of textbook containing the mistakes was conducted on high school teachers teaching Biology II. As a result, 48 mistakes were determined in 13 subjects. As many as four mistakes were found even in one subject in a certain textbook and a same mistake was found repeatedly in several textbooks. The survey result showed that the teachers who pointed exactly the mistakes out corrected properly, however, the percentage of these ones out of 35 teachers replied to survey was less than 50%. The ratios of correction out of total number of responses were high in question #6 (43%), #4-3 (40%), and #1-2 (32%) which were containing a simple mistake in graph, a wrong word and a wrong picture, respectively. But, no one pointed out and made correction in question #5-1 and #5-2 which were containing Z scheme of light reaction without the legend of vertical axis that should be explained as electron energy or standard reduction potential. The result indicates the possibility that the mistakes in photosynthesis unit of Biology II textbook can be corrected and teached properly by teachers may be low. In order to reduce the possibility that students may have misconceptions about photosynthesis, the list of print's errors should be provided to the teachers and/or the training program and/or workshop for in-service high school biology teachers was recommended.

• Korean Journal of Food Science and Technology
• /
• v.35 no.6
• /
• pp.1226-1232
• /
• 2003

Bamboo trees have been used for a long time as folk remedies for treatment of hypertension and stroke symptoms in Oriental regions. These pharmaceutical effects of bamboos look like to be related to its antioxidant capacity and phytochemicals in bamboos. To evaluate the antioxidative effects of bamboo trees, five kinds of bamboo varieties dominant in Korean peninsular were chosen and determined its total antioxidaive activities, free radical scavenging activities and nitrite scavenging activities by TEAC (Trolox Equivalent Antioxidant Capacity) assay, DPPH and Griess reagent assay using in vitro system, respectively. To evaluate the correlation between antioxidative activities and Maillard reaction during hot water extraction, contents of reducing sugar and total nitrogen and brown color intensity at 420 nm were determined. When total antioxidative activities, free radical scavenging activities and nitrite scavenging activities of five kinds of bamboo trees were compared, wang-dae (Phyllostachys bambusoides S. et Z.) showed the strongest effect among samples, although all kinds of extracts showed relatively strong effects against oxidation. The bamboo culms extract showed stronger antioxidative effects than that of bamboo leaves. In each fraction obtained from 70% ethanol extract, antioxidative effect were increased in order of dichloromethane>ethyl acetate>butanol>water>hexane fraction. In reducing sugar analysis of extracts, reducing sugar contents of water extracts were higher than that of 70% ethanol extracts and wang-dae water extract showed the highest level which was 708.92 mg/g. Total nitrogen contents of the extracts were $1.785{\sim}2.605\;mg%$ and contents in water extracts were lower than that in 70% ethanol extracts. Brown color intensity at 420 nm showed similar tendency with results in reducing sugar contents.

• Korean Journal of Environment and Ecology
• /
• v.31 no.2
• /
• pp.202-219
• /
• 2017

The purpose of this study was to analyze the community structure of forest vegetation in Mt. Geumsusan belong to Woraksan National Park for providing basic information of ecological management. Data were collected by 41 plots from June to November in 2016 using Z-M phytosociology method, which was analyzed with vegetation types, mean importance value and coincidence method. As the results, the forest vegetation was classified into Quercus mongolica community group including Cornus controversa community, Castanea crenata community(Vegetation unit 3), Quercus variabilis community(Vegetation unit 4) and Q. mongolica community(Vegetation unit 5). C. controversa community was divided into two groups such as Ulmus davidiana var. japonica group(Vegetation unit 1) and Parthenocissus tricuspidata group(Vegetation unit 2). Mean importance percentage of vegetation unit 1 was showing Fraxinus rhynchophylla 14.9%, Morus bombycis 8.7% and Acer pictum subsp. mono 8.3%, that of unit 2 was Larix kaempferi 23.2%, C. controversa 20.1% and P. tricuspidata 6.5%, that of unit 3 was Q. mongolica 15.8%, C. crenata 13.4% and F. rhynchophylla 9.8%, that of unit 4 was Q. mongolica 26.6%, Q. variabilis 20.8% and Pinus densiflora 16.7%, that of unit 5 was Q. mongolica 48.3%, Styrax obassia 7.5%, F. rhynchophylla 5.3% in the order, respectively. Each vegetation unit was classified with dependance on environmental factors as 700m of altitude, $20^{\circ}$ of slope degree, middle slope of topography, 20% of bare rock, 30 taxa of present species, 80% of tree layer coverage rate and 20m of tree layer height. In conclusion, it was preferentially considered that development of peculiar and specific management methods with vegetation unit classified above should be needed for ecological and sustainable forest vegetation management.

• Journal of the Korean Geophysical Society
• /
• v.3 no.4
• /
• pp.269-280
• /
• 2000

Rail vibration in city zone is becoming a serious environmental problem. In order to make a reduction plan for rail vibration, the research was conducted in which many experiments to measure actual rail vibration along the railroad through the central Deajeon area. A digital vibration level meter was used to measure rail vibration. Vibration levels of Z-axis were measured at every second for the duration of the train passing. The measuring station was placed at every 5m for the distance of 55m. A total of 353 different sets of vibration level were obtained. The signals were processed to get $L_{10}$ value and analyzed in terms of distance, train velocity, and number of trains. As a result, it has been found that rail vibration exceed the allowable vibraton limit of 60 dB, at the point of 25 m far from the railroad center, which is regulated by the las of vibration and noise. Train velocity was found to affect a little for vibration level within the zone. It was also found that a trench installed along a railroad could reduce vibration level up to approximately 10 percent. A model test was conducted to investigate the influence of the location and size of trench, on the transfer of vibration. A heavy steel ball was used to generate vibrations. On the basis obtained from this study, it could be concluded that the application of distance-attenuation and the installment of a trench along railroad could be applied as a reduction plan for rail vibration. Because limitions might exist to depend on the effect of distance attenuation, trenchs excavated along a railroad might be suggested as the most efficient solution to reduce railroad vibration.