• Special Issue of the Society of Naval Architects of Korea
• /
• 2011.09a
• /
• pp.117-126
• /
• 2011

The buckling assessment of plate panels described in common structural rules (CSR) is to be determined according to the buckling utilization factor with hull girder stresses calculated on net hull girder sectional properties. As the thickness requirement for the buckling assessment of plate panels is not explicitly given in CSR, a lot of time is spent to find the proper thickness of plate panels until reaching to an allowable buckling utilization factor. In this study, in order to reduce time and cost, the thickness requirement of plate panels satisfying buckling assessment was derived. The structural design system included with the thickness requirement for buckling assessment was developed. The system is called as Oil-tanker Automated Structural Investigation System (OASIS). The design result of longitudinal strength members using OASIS was verified by Nauticus Hull which is the rule scantling software of DNV. Finally, optimum design of a double hull tanker for the minimum weight using OASIS was presented.

• Korean Journal of Food Science and Technology
• /
• v.28 no.3
• /
• pp.587-592
• /
• 1996

Effects of high pressure on the inactivation and microstructure of Candida tropicalis (C. tropicalis) were in vestigated. High pressure inactivation of C. tropicalis was a first order reaction. The decimal reduction time (D value) at 400 MPa was 1.4 min at $25^{\circ}C$ and z value was 100 MPa. The effect of high pressure treatment was higher when treated at $45^{\circ}C$ than at $25^{\circ}C$. Damages in mitochondrial membrane and cell wall of C. Tropicalis were observed when it was pressurized at 400 MPa for 10 min. It indicates that high pressure affects the membrane system of the cell and causes the inactivation of C. tropicalis.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.2 no.1
• /
• pp.41-49
• /
• 1994

This experiment was carried out in order to study the effect of organic fertilizer on the growth of Korean lawngrass (Zoysia matrella L. Merr.) and the change of soil chemical characteristics. The results obtained are summarized as follows : 1. Organic fertilizer was appropriate for base-dressing in the sod establishment of Korean lawngrass(Z. matrella L. Merr.) 2. Chlorophyll contents in mixed application plot of complex fertilizer(21-17-17) and organic fertilizer were more abundant than that in single application plot of organic fertilizer. 3. Application of organic fertilizer promotes the contents of available phosphorous in soil. 4. Dry weights of base-dressing and top-dressing plot had more weight about 40%, 12% than that of control plot, respectively. So base-dressing was more effective than top-dressing in the application of organic fertilizer.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.23 no.2
• /
• pp.450-460
• /
• 1996

The purpose of this study was to compare shear bond strength of composite resin using several dentin bonding agents and light cured glass ionomer cement(Fuji II LC). 40 Bovine primary anterior teeth were used for this experiment. Labial surface of teeth were flattened. It were divided into four groups. Each group was composed of 10 teeth. The material used for this experiment were Scotchbond Multipurpose-Z-100, Allbond 2-Aelitefil, Gluma-Pekalux, light cured glass ionomer cement(Fuji II LC). Each of the materials was applied to the exposed surfaces of 10 teeth by insertion into a cylindrical shaped matrix which is 3mm diameter and 3mm in height. The completed specimens were stored at $37^{\circ}C$ under 100% humidity for 24 hours : the shear bond strength of each material to dentin surface were measured with INSTRON universal testing machine. The results were as follows : 1. Shear bond strength to dentin surface increased in order of light cured glass ionomer cement(Fuji II LC), Gluma, Allbond 2, Scotchbond Multipurpose. 2. Between shear bond strength of light cured glass ionomer cement(Fuji II LC) and Allbond 2, there was statistical significace(p<0.05) 3. Between shear bond strength of light cured glass ionomer cement(Fuji II LC) and Scotchbond Multipurpose, between shear bond strength of Gluma and Scotchbond Multipurpose, there was statistical significance.(p<0.01) The shear bond strength of dentin bonding agents were higher than light cured glass ionomer cement. The reason is that materials and quality of dentin bonding agent were enhanced. Further investigation is necessary to improve shear bond strength of light cured glass ionomer cement.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.1
• /
• pp.32.2-32.2
• /
• 2013

We examine large-scale environmental effects on the formation and the mass growth of dark matter halos. To facilitate this, we constructed dark matter halo merger trees from a cosmological N-body simulation, which enabled us to trace the merger information and the assembly history of individual halos. In fact, since the massive halos are more likely to be distributed in denser regions than in less dense regions (Mo & White, 1996), the large-scale environment dependence of the properties of halos can be partly originated from the halo mass effect. In order to avoid such contamination, caused by the mass dependence of halo properties, we carefully measured the local overdensity as the indicator of large-scale environment, which was calculated to be as independent of halo mass as possible. Small halos (${\sim}10^{11-12}M_{\odot}$), which usually host isolated single galaxies, show a notable difference on the formation time of galaxies depending on their large-scale environments, which reconfirms halo assembly bias (Gao & White, 2007). Furthermore, we investigate how this environmental effect on small halos is correlated with the mass assembly history of galaxies by using our semi-analytic model. We found that assembly bias in small halos does not have significant effects on the formation time or on the star formation history of galaxies residing in those halos except for the individual stellar mass of galaxies at z = 0. On average, isolated galaxies in high-density regions tend to be slightly more massive than those in low-density regions. Although the observational data from the current galaxy surveys is not yet sufficient for testing this prediction, future galaxy surveys will be able to explore these small galaxies more thoroughly.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.1
• /
• pp.43.2-43.2
• /
• 2013

The local environmental effects on the triggering of active galactic nucleus(AGN) activity has been studied with many authors, but there still be controversy. We perform statistical analysis for nearby(0.01 < z < 0.05) volume limited(Mr < -19) samples with visual inspection based on Sloan Digital Sky Survey Data Release7. We inspect ~60,000 galaxy images visually to find peculiar objects which show not only ongoing merging features and tidal features, but also post merging features like ring or shell structures. We found that these peculiar features were shown at least 2 times more frequently among AGN host galaxies than non AGN galaxies, and this trend was still visible when galaxy properties such as color or stellar mass are fixed. Furthermore, L[OIII] and L(Ha) of peculiar galaxies are found to be more increased than those of normal galaxies. In order to ensure this results, we also checked it for a smaller subsample with ~2mag deeper monochromatic images provided from SDSS Stripe82 database, and found consistent results. At last, we perform the same work for pair(r_p<80kpc/h, delta_v<200km/s) systems. Because of some pair systems which do not interact gravitationally in actuality but fulfill the criteria for identification of pair system, the trends are found to be slightly weaker. We also found that line luminosities are increased consistently as projected distance between central and companion galaxy decreased, and as companion color gets bluer. Overall, the results of this study tell us that the local environment of galaxies affect the frequency as well as the strength of AGN activity. Local environmental effects, however, may not be the dominant triggering mechanism for AGN activity since the majority of peculiar galaxies are non AGN galaxies.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2000.05a
• /
• pp.211-214
• /
• 2000

This paper describes a lateral guidance system of an autonomous vehicle, using a neural network model of magneto-resistive sensor and magnetic fields. The model equation was compared with experimental sensing data. We found that the experimental result has a negligible difference from the modeling equation result. We verified that the modeling equation can be used in simulations. As the neural network controller acquires magnetic field values(B$\sub$x/, B$\sub$y/, B$\sub$z/) from the three-axis, the controller outputs a steering angle. The controller uses the back-propagation algorithms of neural network. The learning pattern acquisition was obtained using computer simulation, which is more exact than human driving. The simulation program was developed in order to verify the acquisition of the teaming pattern, learning itself, and the adequacy of the design controller. Also, the performance of the controller can be verified through simulation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.617-620
• /
• 1999

In this study, the polarization e(fecal and the birefringence effect of amorphous germanium (a-Ge) thin films were investigated by using linearly polarized He-Ne laser beam. The a-7e thin films were deposited on the quarts substrate by plasma enhanced chemical vapor deposition (PECVD) and thermal vacuum evaporation In order to obtain the optimum grating arrays, inorganci resists such as Si$_3$N$_4$ and a-Se$_{75}$ Ge$_{25}$ , were prepared with the optimized thickness by Monte Carlo (MC) simulation. As the results of MC simulation, the thickness ofa-Se$_{75}$ Ge$_{25}$ resist was determined with Z$_{min}$ of 360$\AA$ . The resists were exposed to Ga$^{+}$-FIB with accelerating energies of 50 keV, developed by wet etching, and a-Ge thin film was etched by reactive ion-etching (RIE). Finally, we were obtained grating arrays which grating width and linewidth are 0.8${\mu}{\textrm}{m}$, respectively and we studied the polarization and birefringence effect in transmission grating array made of high refractive amorphous material, and the applicability as waveplates and polarizers in optical device.e.e.

• Structural Engineering and Mechanics
• /
• v.24 no.6
• /
• pp.647-664
• /
• 2006

In this study, an improved finite element formulation with a scheme of solution for the large deflection analysis of inextensible prismatic and nonprismatic slender beams is developed. For this purpose, a three-noded Lagrangian beam-element with two dependent degrees of freedom per node (i.e., the vertical displacement, y, and the actual slope, $dy/ds=sin{\theta}$, where s is the curved coordinate along the deflected beam) is used to derive the element stiffness matrix. The element stiffness matrix in the global xy-coordinate system is achieved by means of coordinate transformation of a highly nonlinear ($6{\times}6$) element matrix in the local sy-coordinate. Because of bending with large curvature, highly nonlinear expressions are developed within the global stiffness matrix. To achieve the solution after specifying the proper loading and boundary conditions, an iterative quasi-linearization technique with successive corrections are employed considering these nonlinear expressions to remain constant during all iterations of the solution. In order to verify the validity and the accuracy of this study, the vertical and the horizontal displacements of prismatic and nonprismatic beams subjected to various cases of loading and boundary conditions are evaluated and compared with analytic solutions and numerical results by available references and the results by ADINA, and excellent agreements were achieved. The main advantage of the present technique is that the solution is directly obtained, i.e., non-incremental approach, using few iterations (3 to 6 iterations) and without the need to split the stiffness matrix into elastic and geometric matrices.

• Korean Parent-Child Health Journal
• /
• v.4 no.2
• /
• pp.1-15
• /
• 2002

The purpose of this study is to identify the characteristics and influencing factors of the attachment-oriented caretaking behaviors among the mothers with infants. The total number of 204 mothers participated in this survey as subjects. They all were breast-feeding mothers who had their infants joining in the semi-final round of a healthy breast-feeding infant contest. The data were collected from July 14, 1999 to May 19, 2000. And the data were analyzed by SPSSWIN 10.0 version. The result of this study was as follows ; 1. The mean ages of the subjects were 29.5 and 95.6 percents of them were no-job housewives. 57.8% of them were normal delivery. And the mean months of the infants were 6.2 and the male infants were 57.4%. The first born babies were 62.3%. 2. The mothers are affirmative enough with their attachment-oriented caretaking behaviors (the total mean was $3.58{\pm}.631$). In general, the mothers showed very attachment-oriented caretaking behaviors, but the points that indicated "recording the development characteristics of the infant and discussing them with husband" were very low(score $2.79{\pm}.982$). 3. There are Significant differences in caretaking behaviors of the mothers according to their ages(F=3.497, p=.017), the degree of morning sickness(F=2.633, p=.050) and the birth order of their infants(F=4.854, p=.003). The older mothers and mothers who experienced the less morning sickness showed the higher scores of the attachment-oriented behaviors. The mothers who experienced the more deliveries showed the higher scores of the attachment-oriented behaviors. Accordingly, the above result suggests that the systematic and practical nursing intervention to encourage the attachment-oriented behaviors is essential to the younger, primipara mother.