• 대한환경공학회지
• /
• 제39권9호
• /
• pp.505-512
• /
• 2017

NaA 제올라이트 분말(Z-PA) 및 펠렛(Z-BA)를 이용하여 수중의 Sr 이온의 흡착특성을 검토하였다. 회분식 실험에서 Z-BA와 Z-PA에 의한 Sr 이온의 흡착은 유사 1차식보다는 유사 2차식에 잘 부합되었고, 등온 흡착실험 결과는 Langmuir 등온식에 잘 부합하였으며, 이 등온식으로부터 구한 최대 흡착량은 Z-PA는 233.32 mg/g, Z-BA는 164.60 mg/g이었다. 연속식 실험에서 Sr 이온의 농도가 증가함에 따라 Sr 이온의 총 흡착량(q)는 증가하였으나 파과시간, 처리 부피($V_{eff}$) 및 총 제거율(R)은 감소하였다. 실험으로부터 구한 파과곡선은 Thomas 모델식에 의해 잘 모사되었다.

• 한국정밀공학회지
• /
• 제13권5호
• /
• pp.115-121
• /
• 1996

Recently, the Z-Map model has been used widely to represent the three dimensional geometric shape and to achieve the cross-section and point evaluation of the shape. In this paper, the CNC cutting planning and simulation modules for product with three dimensional geometric shape are realized based on the Z-Map model. The realized system has the various capabilities related to the automatic generation of tool path for the rough and finish cutting processes, the automatic elimination of overcut, the automatic generation of CNC program for a machining center and the cutting simulation. Especially, the overcut-free tool path is obtained by using the CL Z-Map models which are composed of the offset surfaces of the geometric shape of product.

• 소음진동
• /
• 제10권2호
• /
• pp.269-279
• /
• 2000

This paper deals with the development of biomechanical model on a seat with backrest support in the vertical direction. Four kinds of biomechanical models are discussed to depict human motion. One DOF model mainly describes z-axis motion of hip, two and three DOF models describe z-axis of hip and head, and while nine DOF model suggested in this study represents more motion than the otehr model. Three kinds of experiments were executed to validate these models. The first one was to measure the acceleration of the floor and hip surface in z-axis, the back surface in x-axis, and the head in z-axis under exciter. From this measurement, the transmissiblities of each subject were obtained. The second one was the measurement of the joint position by the device having pointer and the measurement of contact position between the human body and the seat by body pressure distribution. The third one was the measurement of the seat and back cushion by dummy. The biomechanical model parameters were obtained by matching the simulated to the experimental transmissiblities at the hip, back, and head.

• 한국정밀공학회지
• /
• 제19권12호
• /
• pp.86-92
• /
• 2002

This paper presents a new model of NC verification in NC milling using z-map. The model can describe the motion of machine tool like a real machine effectively. The model uses x, y, and z directional feed rate as well as cutting data for modeling Z-map of workpiece. The model verifies the over-cut, the under-cut and the surface topography using NC codes and cutting conditions. To investigate the performance of the model, simulation study was carried out. As the results, the model gave the geometry accuracy of workpiece, the surface topography, and the chip loads.

• 한국산업융합학회 논문집
• /
• 제4권4호
• /
• pp.365-369
• /
• 2001

This paper presented a new model of virtualized CNC milling machine. The model verifies the over cut, the under cut and the surface roughness using NC file generated from CAM and cutting condition. The model uses Z-map model to verify workpiece. In this paper, the model used the velocities of x, y and z direction and obtained a center point of a hall end mill for modeling Z-map of workpiece. To investigate the performance of the model, simulation study was carried out. As the results, the model gave geometry accuracy of workpiece, the surface roughness and the chip loads in finish cutting that can predict tool chipping. The virtualized CNC machine can he used a flat end mill, a ball end mill and a rounded end mill.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.725-729
• /
• 2000

This paper presented a new model of NC verification in ball end milling. The model verifies the over cut the under cut and the surface roughness using NC file generated from CAM and cutting condition. The model uses Z-map model to verify workpiece. In this paper, the model used the velocities of x, y and z direction and obtained a center point of a ball end mill for modeling Z-map of workpiece. To investigate the performance of the model simulation study was carried out. As the results, the model gave geometry accuracy of workpiece, the surface roughness and the chip loads in finish cutting that can predict tool chipping.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.86-89
• /
• 2002

In NC machining, the ability to automatically generate an optimal process plan is an essential step toward achieving automation, higher productivity, and better accuracy. For this ability, a system that is capable of simulating the actual machining process has to be designed. In this paper, a milling process simulation system for the general NC machining was presented. The system needs first to accurately compute the cutting configuration. ME Z-map(Moving Edge node Z-map) was developed to reduce the entry/exit angle calculation error in cutting force prediction. It was shorn to drastically improve the conventional Z-map model. Experimental results applied to the pocket machining show the accuracy of the milling process simulation system.

• 정보관리학회지
• /
• 제14권1호
• /
• pp.183-206
• /
• 1997

본 연구는 정보검색용 표준 프로토콜인 Z39.50을 공동편목에 응용하기 위하여 Z39.50의 발전과정과 제반기능에 대하여 살펴보고, Z39.50의 속성과 데이터베이스 갱신서비스를 토대로 Z39.50 공동편목 게이트웨이 모형을 설계하였다. 이 게이트웨이는 국내교육.연구도서관 서지협력망의 온라인 공동편목시스템을 대상으로 하였다. 본 연구에서 설계된 두가지 측면의 Z39.50공동편목 게이트웨이, 즉 중앙집중형 공동편목 게이트웨이와 분산형 공동편목 게이트웨이 모형은 기본적으로 웹서버에서 동작하며 이용자 접근이 쉬운 웹브라우저를 통하여 접근할 수 있도록 설계하였다.

• The Journal of Asian Finance, Economics and Business
• /
• 제9권5호
• /
• pp.487-496
• /
• 2022

This study attempts to discover a differentiated service strategy for the hotpot restaurant industry from the perspective of Chinese Generation Z customers, as well as to further explore the inner needs of Chinese Generation Z to make practical implications for discovering the method of gaining their satisfaction and loyalty. This paper employs questionnaires to collect analytical data and through a case study to produce company strategies. Smith's Marketing Ethics Sequential System Model (SMESSM) is introduced in this paper for the decision of whether the case study company Haidilao Hot Pot should make a new strategy on service based on Generation Z's consuming behavior. The findings of this study demonstrate that hotpot restaurant must differentiate their services for Generation Z from older generation customers to gain a sustainable development of the hotpot business. Proper differentiated service will not only improve Generation Z's dining experience but also reduce costs. This paper is the first to discuss differentiated service strategy in the hotpot restaurant business from the perspective of Generation Z customers. And a Chinese experience of SMESSM for practical use is introduced in this paper, which enriches the relevant implications for future research on business strategy.

• 대한환경공학회지
• /
• 제31권11호
• /
• pp.941-946
• /
• 2009

본 연구는 상용 합성 제올라이트(Z-WK), 석탄계 비산재를 이용한 합성 제올라이트(Z-C1) 및 비산재(F-C1)를 이용하여 Lagergen 1차 및 2차 속도식과 Langmuir, Freundlich, Redlich-Peterson 및 Koble-Corrigan 식에 의해 코발트(Co)의 흡착속도와 평형흡착 특성을 평가하였다. 석탄계 비산재를 이용하여 Si/Al 비가 1.51인 제올라이트(Z-C1)를 제조하였으며, 흡착제 종류에 따른 Co 흡착량은 Z-C1(94.15mg/g) > F-C1(92.94mg/g) > Z-WK(88.56mg/g)순이었다. Z-WK와 Z-C1의 Co 흡착속도는 유사 2차 반응식으로서 정확한 예측이 가능하였다. Z-WK와 Z-C1의 Co 평형흡착량은 Langmuir 식과 Redlich-Peterson 식으로 잘 예측할 수 있었다. Z-C1은 수중의 Co 제거를 위한 유용한 흡착제로 사용이 가능할 것이다.