• 전력전자학회논문지
• /
• 제18권2호
• /
• pp.123-130
• /
• 2013

This paper proposes the switched trans Z-source inverter(STZSI) which combined the characteristics of the trans Z-source inverter(TZSI) and the switched inductor Z-source inverter(SLZSI). The proposed STZSI has the same performance compared with the SLZSI which is improved the voltage boost performance of the conventional typical X-shaped ZSI, and it has advantage that circuit structure of Z-impedance network is more simple. And, in order to step up the voltage boost factor under the condition of the same duty ratio, unlike the SLZSI adding the inductors and diodes, the proposed method is dune by changing the turn ratio of trans primary winding of Z-impedance network. To confirm the validity of the proposed method, PSIM simulation and a DSP(TMS320F28335) based experiment were performed using trans with turn ratio 1 and 2 under the condition of the input DC voltage VI=50V, duty ratio D=0.1 and D=0.15. As a result, under the same input/ouput condition, the inverter arm voltage stress of the proposed method is reduced to about 15%-22% as compared with typical X-shaped ZSI, and the elements in Z-impedance network of the proposed method is reduced as compared with the SLZSI.

• Transactions on Electrical and Electronic Materials
• /
• 제18권6호
• /
• pp.338-340
• /
• 2017

Breakdown of solid insulating materials in power equipment could result in undesired outages and replacements, and may be due to an increase in electric stress on the material. Therefore, it is necessary to conduct a proper diagnosis of materials before their practical use. In this work, a few inherent properties of different non-cellulosic insulating materials, such as Nomex, Teflon, laminated Nomex, glass bonded mica, epoxy resin bonded mica paper, and epoxy resin bonded fiberglass, have been evaluated by performing non-destructive dielectric diagnostic measurements, and an attempt has been made to correlate these basic parameters to evaluate the breakdown strength (BDS). An equation has been proposed using a basic theory which defines the correlation between the BDS, dielectric constant, dissipation factor, sample thickness, and volume resistivity. The results obtained from the equation are also compared with the experimental values. The suggested equation will be helpful to predict the BDS of any non-cellulosic material without experimentation in the laboratory.

• 센서학회지
• /
• 제20권2호
• /
• pp.71-76
• /
• 2011

To characterize the relationship between the stage of hepatic fibrosis and bioimpedance, several electric parameters were estimated in rats with $CCl_4$-induced liver fibrosis. Thirty three Sprague-Dawley rats were intraperitoneally injected with a $CCl_4$-mineral oil mixture (1:1, 0.2 mL/100 g) twice a week for 8 weeks. The resistance(R), reactance(X), impedance(Z), and dissipation factor(D) between 1 kHz and 100 kHz were then evaluated in the livers of the rats under pentobarbital anesthesia using an HP4294A Impedance Analyzer. The rats were killed 2, 4, 6, and 8 weeks later, and their livers were classified in accordance with Ishak's scoring system. R, X, and Z changed in accordance with the progression of hepatic fibrosis and the changes were greater at lower frequencies than at higher frequencies. In comparison, the D spectrum was biphasic; D increased initially then decreased with increasing frequency. All of the parameters(R, X, Z, and D) changed in accordance with the stage of fibrosis in the livers, but D changed specifically with the progression of fibrosis. These results indicate that hepatic fibrosis may be evaluated by determining the changes in D.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• 제24권1호
• /
• pp.109-117
• /
• 2021

Purpose: Ménétrier disease (MD) was first described in 1888, and 50 cases have been reported until now. We aimed to discuss the etiology, diagnostics, and management of MD in children. Methods: We searched for case reports published from 2014 till 2019 in English using PubMed. Articles were selected using subject headings and key words of interest to the topic. Interesting references of the included articles were also included. Results: The pathophysiology of MD is still uncertain. However, overexpression of transforming growth factor alpha with transformation of the gastric mucosa has been observed, which may be mediated by genetics and provoked by an infectious trigger. Clinically, MD is diagnosed by abdominal pain, vomiting, anorexia, and edema secondary to hypoalbuminemia. A gastroscopy with biopsy is the gold standard for the diagnosis of MD. In children, the disease is self-limiting and only requires supportive treatment. In general, children have a good prognosis and recover spontaneously within a few weeks. Conclusion: Few pediatric cases of MD have been described in recent years, and with all different etiology. Endoscopy with biopsy remains the golden standard for the diagnosis of MD, and in children, the disease is self-limiting.

• 한국토양비료학회지
• /
• 제16권3호
• /
• pp.210-222
• /
• 1983

다요인조절개염하(多要因調節槪念下)에서 수도작(水稻作)에 대(對)한 요소시비시(尿素施肥時) N성분적량(成分適量)을 여측(予測)하는 모형식(模型式)에 관여(關與)하는 이앙재배전(移秧栽培前) 경토화학성분요인(耕土化學成分要因)은 유효규산함량(有效珪酸含量) ppm(X)과 유기물함량(有機物含量)% (Z)비(比)인 X/Z비(比)와 상대가리(相對加里) 활성도비(活性度比)인 Kas/kai이였다. 여측모형식(予測模型式) $NRe=(58.5+0.647x/z){\cdot}F$에서 F는 품종(品種), 기상(氣象) 및 토양조건(土壤條件)에 따라 변동(變動)되는 생산성(生産性) 요인(要因)이라고 정의(定義)하였으며 이 값은 경토중(耕土中) X/Z값보다는 상대가리활성도비(相對加里活性度比)인 Kas/kai의 함수관계식(函數關係式) Fb=.65+1.086Kas/kai에서 여측(予測)함이 보다 합리적(合理的)임을 밝혔다. 이 식(式)의 Kas는 경토중(耕土中) 치환성염기함량(置換性鹽基含量)에서 산출(算出)되는 가리활성도비(加里活性度比)이며 Kai는 표준품종(標準品種)인 진흥(振興)에 대(對)한 리상가리활성도비(理想加里活性度比)로서 기보고(旣報告)(박(朴) 1975)에서와 같이 Kai=0.03+0.00083X/Z에서 산출(算出)한다. 상대가리활성도비(相對加里活性度比)는 Kas=Kai가 되게 조절(調節)하기 위(爲)해서 1.0이 되어야 하는 값이나 품종군별(品種群別)로 차이(差異)가 있어 우리나라에서 재배(栽培)되는 인도형(印度型)과 일본형교잡종(日本型交雜種)인 밀양(密陽) 23호(號)에서는 1.63, 비율빈(比律賓)에서 재배(栽培)되는 인도형품종군(印度型品種群)인 IR8, 20, 36 및 42등(等)에서는 공통적(共通的)으로 0.322가 됨을 밝혔고 가리시비적양여측(加里施肥適量予測)에 활용(活用)할 수 있는 각품종별(各品種別) 리상가리활성도비(理想加里活性度比) $Kai_1$ 및 $Kai_2$는 인도형${\times}$일본형(印度型${\times}$日本型) 교잡종(交雜種) 및 인도형품종군(印度型品種群)에 대(對)하여 각각(各各) 다음 함수관계식(函數關係式)에서 추정(推定)할 수 있음을 밝혔다. $\\Kai_1=0.0489+0.001353X/Z\\Kai_2=0.01+0.000267X/Z$.

• 디지털산업정보학회논문지
• /
• 제19권3호
• /
• pp.45-60
• /
• 2023

The purpose of this study is to explore factors that affect millennials and generation Z customers' perception on intention to recommend to use the digital payment services and invesetigate factors that affect perception on sustainable growth of the digital payment services. This study applied the following research questions: i) how perceived brand value, easy to use, personalization, open to public, and social value affect intention to recommend to use the digital payment services and ii) how perceived public policy, promotional strategy, and prspects affect intention to recommend to use the digital payment services to others. This study conducted an online survey. This study applied factor, ANOVA, and regression analysis to test hypotheses. The results of this study found that effects of personalization, open to public, and social value on intention to recommend the service showed significance in the case of millennials, while effects of brand value, easy to use, and open to publis on intention to recommend the service showed significance in the case of generation Z. The results provide managerial and policy implications on how to apply better strategies and pepare policies to enhance adoption of the digital payment service in cases of millennials and generation Z.

• 디지털산업정보학회논문지
• /
• 제20권2호
• /
• pp.91-108
• /
• 2024

The purpose of this study is to investigate factors influencing the prospects of living labs among Millennials and Generation Z and to provide policy suggestions. This study proposed a comprehensive framework to investigate the influence of citizen awareness, perceived definition, willingness to participate, the role of local government. and expected satisfaction. This study employed an online survey conducted by a well-known research organization. Factor and regression analysis were utilized for data analysus. The results of this study indicate that the effects of citizen awareness, willingness to participate, the role of local government, and expected satisfaction on the prospects for living labs were significant for Millennials, whereas the effects of perceived definition and expected satisfaction on the prospects for living labs were significant for Generation Z. This study suggests the importance of developing better policies to create prospective living labs for real-world environments. This includes preparing policies for the development of future-oriented living labs, establising innovative living labs for practical applications, and designining future-realy living labs to address real-world challenges.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 춘계학술대회 논문집
• /
• pp.182-186
• /
• 1995

In this pacer, it is examined and confirmed that the R factor which is compensated after analyzing the characteristics of superconductor resulted from this experimented theory with the computer simulation, is refined to R$\sub$WP/=8.83[%], R$\sub$P/=6.47[%], R$\sub$I/=10.08[%], RF=7.19[%], R/eub E/=3.76(%), and on the basis of these experimental data, the significant parameter such as the scale factor(s) and the zero point shift(Z) and FWHM value(U,V,W) are optimized as follows; S =72.0827E-3, Z=0.2146, U=4.2761E-2, V=1.7983E-2, and W=2.6768E-2

• 대한수학회보
• /
• 제51권2호
• /
• pp.443-455
• /
• 2014

Atanassov introduced the irrational factor function and the strong restrictive factor function, which he defined as $I(n)=\displaystyle\prod_{p^{\alpha}||n}^{}p^{1/{\alpha}}$ and $R(n)=\displaystyle\prod_{p^{\alpha}||n}^{}p^{{\alpha}-1}$ in [2] and [3]. Various properties of these functions have been investigated by Alkan, Ledoan, Panaitopol, and the authors. In the prequel, we expanded these functions to a class of elements of $PSL_2(\mathbb{Z})$, and studied some of the properties of these maps. In the present paper we generalize the previous work by introducing real moments and considering a larger class of maps. This allows us to explore new properties of these arithmetic functions.

• Journal of the Korean Wood Science and Technology
• /
• 제23권3호
• /
• pp.8-15
• /
• 1995

This analytical study was carried out to make quality and productivity up in designing the frame-type furniture with semi-rigid joint by understanding the mechanical and structural behavior of the joint and by evaluating the validity of application of the time-saving Finite Element Method to its structural analysis. Slope deflection equation for rigid joint was modified to describe the moment-rotation behavior of semi-rigid joint and the joint stiffness factor(Z) could be calculated to lessen the experimental expense. It was proved that Finite Element Analysis with imaginary elements having equivalent MOE to the semi-rigid joint could be the alternative method for the structural analysis of the frame-type furniture, comparing the internal rotation of the 2-dimensional beam-to-column model with two-pin(wooden dowel) from the finite element method with other available theoretical and experimental rotation value.