• 구강회복응용과학지
• /
• 제37권4호
• /
• pp.177-185
• /
• 2021

기존의 3 mol%의 이트라아(Y₂O₃)로 안정화된 정방정 지르코니아(3 mol% yttria stabilized tetragonal zirconia polycrystal, 3Y-TZP) 뿐만 아니라 이트리아 함량이 증가된 반투명 지르코니아(translucent zirconia)를 이용한 단일구조 지르코니아 보철물의 사용이 증가하면서 치과용 지르코니아의 광학적 성질에 영향을 미치는 요소에 대한 연구가 지속적으로 이루어지고 있다. 이트리아 함량, 보철물 두께, 소결과정, 연마 및 광택소성 그리고 치과용 시멘트 등과 같은 치과기공실 및 진료실 과정의 처리 방법에 따라 치과용 지르코니아의 광학적 효과가 다르게 나타난다. 이트리아 농도의 증가는 반투명도의 개선과 동시에 차폐효과의 감소를 유발할 수 있으며 수복물 두께가 증가할수록 반투명도는 감소하지만 지르코니아 블록의 물성에 따라 요구되는 두께가 다르므로 주의해야 한다. 고속소결 방식은 제작시간을 단축시키나 경우에 따라 보철물의 반투명도가 감소할 수 있다. 지르코니아의 표면거칠기 및 광택소성 처리에 따라 광학적 결과도 영향을 받을 수 있다. 적절한 유색 시멘트의 사용은 지르코니아의 차폐효과에 도움이 되어 보다 자연스러운 보철치료가 가능하다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1993년도 추계 학술발표 강연 및 논문 개요집
• /
• pp.78-79
• /
• 1993

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1999년도 춘계학술발표강연 및 눈문개요집
• /
• pp.72-72
• /
• 1999

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 1999년도 제2회 총회 및 춘계학술발표회
• /
• pp.56-56
• /
• 1999

• 한국세라믹학회지
• /
• 제29권11호
• /
• pp.851-854
• /
• 1992

It was grown ZrO2:10 mol% Y2O3 single crystals doped with 1 wt% of rare earth metal ion (Ce, Pr, Nd, Er, Eu) by Skull Method. Grown crystals showed Ce:orange-red, Pr:golden-yellow, Nd:lilac, Er:pink, Eu:light pink due to dopant effect. It was examined color centers in light absorption pattern of visible region (λ= 300~700 nm); in as grown samples, absorption by Ce4+, (Pr4+, Pr3+), Nd3+, Er3+, Eu3+ ions were important, and in samples after vacuum annealing, decrease of absorption by Pr4+ ion and increase of absorption by Pr3+ ion was important, and absorption by Ce3+, Eu2+ was important due to reduction of activator.

• 한국세라믹학회지
• /
• 제44권2호
• /
• pp.79-83
• /
• 2007

To fabricate a thick, porous yttria-stabilized zirconia without cracking and warping, a method for the simultaneous control of the porosity and shrinkage was designed. As a pore former, a potato starch was used. For the control of shrinkage the oxidation of Al metal particles was used. For the sintering of the above powder mixtures, a partial sintering technique was used at $1300^{\circ}C$ for 10 min in air. Upon adding the additives, high open porosity above 53% and a low shrinkage level were obtained. As a result cracking and warping of the sintered body were deterred. This outcome most likely resulted from the compensation of sintering shrinkage due to the volume expansion caused by oxidation of the Al metal particles during heat-treatment.

• The Korean Journal of Ceramics
• /
• 제4권2호
• /
• pp.114-121
• /
• 1998

Using Hebb-Wagner's asymmetric cell, partial conductivities of holes and electrons in yttria stabilized zirconia doped with 10 mol% TiO2 have been estimated by a dc polarization measurement. The current interrruption method and ac impedance measurements have been also made to evaluate the ionic conductivity and to examine the consistency of the partial conductivities. Partial conductivities of electrons(σn) and holes (σp) were found to be pro-peortional to -1/4 and 1/4 power of partial pressure of oxygen gas, respectively, except for σn at reducing conditions. In comparison with 5 mol% doped YSZ, σn was found to increase with the increase of TiO2 concentration, but σp stayed at almost a constant value.

• 한국분말재료학회지
• /
• 제5권2호
• /
• pp.111-121
• /
• 1998

Thick and dense deposit of higher than 97% of theoretical density was formed by induction plasma spraying. To investigate the effects of powder morphology on the density of deposit, two different kinds of Yttria-Stabilized-Zirconia powder, METCO202NS (atomized & agglomerated) and AMDRY146 (fused & crushed), were used and compared. After plasma treatment, porous METCO202NS powder was all the more densely deposited and its density was increased. In addition to the effect of powder morphology, the process parameters such as, sheath gas composition, probe position, particle size and spraying distance, and so on, were evaluated. The result of experiment with AMDRY146 powder, particle size and spraying distance affected highly on the density of the deposit. The optimum process condition for the deposition of -75 ${\mu}m$ of 20%-Yttria-Stabilized-Zirconia powder was 120/201/min of Ar/$H_2$ gas rate, 80 kW of plasma plate power, 8 cm of probe position and 150 Torr of spraying chamber pressure, at which its density showed 97.91% of theoretical density and its deposition rate was 20 mm/min. All the results were assessed by statistical approach what is called ANOVA.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(3)
• /
• pp.39-45
• /
• 1996

핵비확산 목적으로 원심분무방법으로 저농축 우라늄 고밀도의 U$_3$Si$_2$구형분말 분산핵연료를 개발하는 일환으로 융점이 높은 U$_3$Si$_2$원심분무용 도가니와 nozzle에 적합한 재료를 선정하고자 zirconia계 물질과 yttria물질에 대한 양립성을 시험하였다. ZrO$_2$계 세라믹은 U$_3$Si$_2$와 우수한 양립성을 나타냈는데 부분 안정화시킨 Zirconia가 Crack 발생이 없어 완전 안정화시킨 것보다 내열충격이 더 양호한 것으로 보인다. Zirconia 도가니는 흑연과 반응하여 표면에 carbide를 형성하여 박리 되는 현상이 발생되었는데 부분 안정화 zirconia가 약간 더 많이 형성됨을 나타냈다. Yttria는 180$0^{\circ}C$이상에서 흑연과 반응하여 액상으로 형성되고 U$_3$Si$_2$와도 반응하여 사용에 부적합한 것으로 판명되었다. 내열충격이 비교적 우수한 부분 안정화 zirconia로 tundish를 제조하여 U$_3$Si$_2$를 원심분무한 결과 nozzle확장되지 않아서 입도분포가 협소한 분말을 얻는데 성공하였다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2002년도 춘계 총회 및 학술발표회
• /
• pp.35-41
• /
• 2002

Dense oxygen ionic conducting materials can be used for oxygen separation membranes at high temperatures. However, they show relatively low permeation flux because of their large resistances. To reduce resistances and improve the oxygen permeation flux, thin dense yttria-stabilized-zirconia (YSZ)/Pd composite dual-phase membranes were fabricated by a new approach that combines the reservoir method and chemical vapor deposition (CVD). A thin porous YSZ layer was coated on a porous alumina support by dip-coating the YSZ suspension. A continuous Pd phase was formed inside pores of the YSZ layer by the reservoir method. The residual pores of the YSZ/Pd layer were plugged with yttria/zirconia by CVD to ensure the gas tightness of the membranes. The oxygen permeation fluxes through these composite membrane were 2.0$\times$10$^{-8}$ mol/cm$^2$.s and 4.8$\times$10$^{-8}$ mol/cm$^2$.s at 105$0^{\circ}C$ when air and oxygen were used as the permeate gases, respectively. These oxygen permeation values are about 1 order of magnitude higher than those of pure YSZ membranes prepared under similar conditions.