• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.7
• /
• pp.863-866
• /
• 2010

Myostatin, which is also known as growth and differentiation factor 8 (GDF8), has been reported to act as a negative regulator of skeletal muscle development. Variation in the myostatin gene (MSTN) has been associated with variation in muscularity in certain "meaty" sheep breeds. Polymerase Chain Reaction-Single Strand Conformational Polymorphism (PCR-SSCP) analysis was used to investigate allelic variation in the previously described g+6223G>A single-nucleotide polymorphism (SNP) in the 3' untranslated region (3' UTR) of MSTN. The sheep studied were 79 New Zealand (NZ) Romney lambs derived from a single sire heterozyous for g+6223G>A, which is in itself notable as this polymorphism has not been described previously in this breed. Allelic variation was observed to be associated with an abnormal gender ratio (p = 0.046) in the progeny. The presence of allele A was observed to have an effect (p<0.05) on birth weight, mean loin yield, proportion yield loin and total muscle yield. Allelic variation did not significantly affect mean shoulder yield, leg yield, proportion yield shoulder and proportion yield leg. This preliminary result suggests that while the A allele at MSTN g+6223 appears to improve some valuable traits in NZ Romney sheep, further research is required to understand if and how it may affect other traits.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.1
• /
• pp.84-92
• /
• 1985

This experiment was carried out to study the morphological traits, yield and yield components of barley cultivars - Kangbori, Olbori and Suwon 18 - on different seeding dates. It appeared generally rapid development of young spike from late stage of floret differentiation (X stage) to complete it at heading stage. Young spike appeared more influencials by the different seeding dates rather than years and cultivars. Stem started the development from late stage of spikelet differentiation (VII stage) to early stage of floret differentiation (IX stage), indicating the continuing development from basal to upper internodes. Number of spikes per unit area showed more effect in seeding date rather than cultivar and year. However, number of kernels per spike and 1,000 kernel weight affected more due to years rather than cultivar and seeding date. It was significantly difference in grain yield according to different seeding dates.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.2
• /
• pp.91-96
• /
• 2005

Proper choice of source populations contributes to the ultimate success of selection for genetic improvement. The source population should possess the most desirable alleles at as many loci as possible for intra population improvement. Such desirable alleles can be intensified by introgression of exotic germ plasm into locally adapted ones through hybridization followed by selection. The objectives of this study were to determine the mean performance, genetic variability $({\sigma}^2G)$ and heritability of fresh ear yield and other important traits within two sweet corn source populations, $BC1-10{\times}Syn-II$ and BC2-10. One hundred selfed progenies from each of the two source populations were evaluated in a $10\times10$ lattice design, at the Institute of Bioscience (IBS) Farm, University of Putra Malaysia (UPM) following the recommended cultural practices. Significant differences among selfed progenies within $BC1-10{\times}Syn-II$ were observed for all traits, while differences among selfed progenies within BC2-10 were noted for fresh ear yield, ear length, ear diameter, number of kernels per row, ear height, days to tasseling and days to silking. Progenies developed from $BC1-10{\times}Syn-II$ population had higher estimates of ${\sigma}^2G$ than did progenies from BC2-10 population for number of kernel rows per ear, total soluble solids, plant height, days to tasseling and days to silking, showing that selection to improve these traits would be more effective in selfed progenies of $BC1-10{\times}Syn-II$ than that in BC2-10. On the other hand, progenies developed from BC2-10 population had higher estimates of ${\sigma}^2G$ for ear length, ear diameter and ear height, indicating that progenies from this population would have better genetic gain than $BC1-10{\times}Syn-II$. Comparable estimates of genetic variance were found for fresh ear yield, and number of kernels per row, indicating that genetic improvement of the two source populations is expected to produce similar genetic gains for these two traits. Therefore, selfed progenies developed from both source populations could be used to improve the two populations for various traits and thereby develop superior genotypes for immediate use in the production system.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.8
• /
• pp.1074-1080
• /
• 2017

Objective: The growth, carcass and retail cut yield records on 1,428 Hanwoo steers obtained through progeny testing were analyzed in this study, and their heritability and genetic relationships among the traits were estimated using animal models. Methods: Two different models were compared in this study. Each model was fitted for different fixed class effects, date of slaughter for carcass traits and batch of progeny test live measurement traits, and a choice of covariates (carcass weight in Model 1 or backfat thickness in Model 2) for carcass traits. Results: The differences in body composition among individuals were deemed being unaffected by their age at slaughter, except for carcass weight and backfat thickness. Heritability estimates of body size measurements were 0.21 to 0.36. Heritability estimates of retail cut percentage were high (0.56 from Model 1 and 0.47 from Model 2). And the heritability estimates for loin muscle percentage were 0.36 from Model 1 and 0.42 from Model 2, which were high enough to consider direct selection on carcass cutability traits as effective. The genetic correlations between body size measurements and retail cut ratio (RCR) were close to zero. But, some negative genetic correlations were found with chest girths measured at yearling (Model 1) or at 24 months of age or with chest widths. Loin muscle ratio (LMR) was genetically negatively correlated with body weights or body size measurements, in general in Model 1. These relationships were low close to zero but positive in Model 2. Phenotypic correlation between cutability traits (RCR, LMR) and live body size measurements were moderate and negative in Model 1 while those in Model 2 were all close to zero. Conclusion: Therefore, the body weights or linear body measurements at an earlier age may not be the most desirable selection traits for exploitation of correlated responses to improve loin muscle or lean meat yield.

• Journal of Forest and Environmental Science
• /
• v.39 no.1
• /
• pp.27-39
• /
• 2023

Twenty-five Eucalyptus clones (14 E. camaldulensis - EC and 11 interspecific eucalypt hybrid clones - EH) grown in three contrasting sites were evaluated for the growth and few wood traits at 4 years of age. The stability, genotype-site interaction and suitability of these clones for pulp and solid wood industry sectors were studied. Growth of eucalypt clones was significantly higher at site 1 with higher rainfall, but wood density did not differ significantly from lower rainfall sites. Kraft pulp yield (KPY) decreased from sites 1 to 3 based on moisture availability, but not between two groups of clones. Volumetric shrinkage (VS) was significantly higher in EC clones at site 3 with lowest rainfall, but there was no specific trend at other two sites with maximum (site 1) and intermediate (site 2) rainfall. The mechanical traits modulus of rupture (MOR) and modulus of elasticity (MOE) were at par in sites 1 and 2, but significantly lower at the driest site 3. The growth rate had a significant positive correlation with KPY, MOR and MOE and a negative correlation with VS, but no significant impact on wood density in both groups of clones. Genotype×environment interaction (G×E) was evident in most traits due to the difference in response of clones to moisture availability. Since wood density was negatively correlated to KPY, it has to be kept at an optimum level for the profitability of pulp industry. There was no significant difference between EC and EH clones for most traits except VS at site 3. Stability of clones varied across sites in different traits, and hence clones may be selected for deployment at each site by screening for growth, followed by wood density, considering the relationship of growth and density with other traits required by pulp and solid wood industry sectors.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2021.10a
• /
• pp.151-151
• /
• 2021

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2021.10a
• /
• pp.150-150
• /
• 2021

• Journal of Animal Science and Technology
• /
• v.58 no.10
• /
• pp.38.1-38.6
• /
• 2016

Background: Despite the importance of relationships between somatic cell score (SCS) and currently selected traits (milk, fat and protein yield) of Holstein cows, there was a lack of comprehensive literature for it in Iran. Therefore we tried to examine heritabilities and relationships between these traits using a fixed-regression animal model and Bayesian inference. The data set consisted of 1,078,966 test-day observations from 146,765 primiparous daughters of 1930 sires, with calvings from 2002 to 2013. Results: Marginal posterior means of heritability estimates for SCS ($0.03{\pm}0.002$) were distinctly lower than those for milk ($0.204{\pm}0.006$), fat ($0.096{\pm}0.004$) and protein ($0.147{\pm}0.005$) yields. In the case of phenotypic correlations, the relationships between production and SCS were near zero at the beginning of lactation but become increasingly negative as days in milk increased. Although all environmental correlations between production and SCS were negative ($-0.177{\pm}0.007$, $-0.165{\pm}0.008$ and $-0.152{\pm}0.007$ between SCS and milk, fat, and protein yield, respectively), slightly antagonistic genetic correlations were found; with posterior mean of relationships ranging from $0.01{\pm}0.039$ to $0.11{\pm}0.036$. This genetic opposition was distinctly higher for protein than for fat. Conclusion: Although small, the positive genetic correlations suggest some genetic antagonism between desired increased milk production and reduced SCS (i.e., single-trait selection for increased milk production will also increase SCS).

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.2
• /
• pp.166-171
• /
• 2007

The objective of this study was to assess the association of polymorphisms in ${\kappa}$-cn, ${\beta}$-lg, ${\beta}$-lg 5′ flanking region, CSN1S2, and IGFBP-3 genes with milk production traits and mastitis-related traits in Chinese Holstein. Traits analyzed were 305 day standard milk yield, protein percentage, fat percentage, the ratio of fat percentage and protein percentage, pre-somatic cell count, somatic cell count, and somatic cell score, respectively. CSN1S2 locus was uninformative because only one genotype BB was found in Chinese Holstein. Allele frequencies of A and B in IGFBP-3 gene were 0.5738 and 0.4262 in Chinese Holstein population, which was different from reported Qinchuan cattle population. The genotypes of animals at IGFBP-3 locus significantly affected 305 day standard milk yield, protein percentage, and somatic cell score. The ${\beta}$-lg genotypes had a significant effect on protein percentage and the ratio of fat percentage and protein percentage. Polymorphism in ${\beta}$-lg 5′ flanking region was associated with 305 day standard milk yield, protein percentage, fat percentage, pre-somatic cell count, and somatic cell count. No significant associations of the polymorphism in ${\kappa}$-cn gene were observed for any trait.

• Korean Journal of Breeding Science
• /
• v.40 no.2
• /
• pp.119-127
• /
• 2008

A total of 41 microsatellite markers were used with 29 genotypes to examine the relationship between SSR polymorphisms and N-use efficiency related traits with a goal to identify the putative QTLs related to these traits. These primers yielded a total of 183 alleles (average 4.46 alleles per primer), and polymorphism information content (PIC) values of the SSRs ranged from 0.119 to 0.805 with mean value of 0.425. Correlation coefficients were obtained among the four N-use efficiency traits in the 34 accessions and significant positive correlations of relative ratios between grain yield and harvest index (r=0.3404) and total dry matter (r=0.7976), while N uptake showed a moderate level of correlation with the ratios of the grain yield and total dry matter, respectively. 36.5% (15/41) SSR markers were monomorphic among the 25 japonica accessions out of the 29 accessions. Association between SSR genotypes and phenotypic performances from the total (29) or japonica (25) accessions was tested based on a single point analysis. Three putative QTL regions were detected for the ratio of grain yield. These include the chromosomal region containing the RM283 locus on chromosome 1 and RM25 on chromosome 8 (all and japonica accessions) and the region with the SSR marker, RM206 on chromosome 11 (the japonica accessions). For the total dry matter ratio, two chromosomal regions were identified as the putative QTL region. One is the region with the SSR marker, RM162 on chromosome 6 (all and japonica accessions) and the other was the one with the SSR marker RM25 on chromosome 8 (the japonica accessions). Among these markers, RM25 showed associations with both traits.