• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.3
• /
• pp.466-470
• /
• 2001

Response surface methodology was used for monitoring extraction conditions, based on quality properties of old pumpkin extracts. Hunter's color L value of extracts was maximized at 101℃, 2.6 hr and decreased gradually after maximum point. The polynomial equation for Hunter's color L value showed 10% of significance level and 0.8799 of R². Hunter's color a value was minimized at 117℃, 3.9 hr and R² of polynomial equation was 0.9852 within 1% significance level. Hunter's color b value and ΔE value increased as the extracting temperature and time increased. Extraction yield of old pumpkin was maximized at 110℃, 4 hr and increased in proportional to the extracting temperature and time, but decreased after 113℃ and 2 hr. Viscosity of pumpkin extracts were maximized at 120℃, nearly 3 hr. R² of polynomial equations for yield, viscosity and sugar content were 0.9532, 0.9812 and 0.8869, respectively. Optimum ranges of extraction conditions for quality properties of old pumpkin were 102∼109℃, 2.5∼3.5 hr, respectively. Predicted values at the optimum extraction condition agreed with experimental values.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1997.04a
• /
• pp.233-240
• /
• 1997

Seven kinds of hysteric model were used and classified three groups considering the absorbing capacities of strain energy for each model. Four kids of each model. Four kinds of strong motion earthquake record (two of them were recorded in Japan and the others in U.S.A) are used. The yield strength of building was set in the ratio to the maximum input acceleration (Yield Strength / Maximum Acceleration = 0.5~3.0). Natural periods of structures were varied 0.1~3.0 second with an interval of 0.1 second. First group : Elastic-Plastic model, Ramberg-Osgood model Second group : Degrading Tri-liner model, Takeda model Third group : Slip model, Origin model, Max-D model Elastic-plastic response spectra were calculated for response velocities, displacement, energy input, ductility factors, accumulated ductility factors. The equivalent response values of M.D.O.F systems against S.D.O.F system were calculated to compare the relationship of two systems.

• Structural Engineering and Mechanics
• /
• v.4 no.1
• /
• pp.9-23
• /
• 1996

The behaviour of elasto-plastic planar arches subjected to dynamic loads in presented. The governing equations are formulated through the dynamic equations and compatibility conditions. The latter is established by applying the generalized conjugate segment analogy. Bending moments at the nodes and axial forces in the members are considered as primary variables in the elastic regime. They are supplemented by the rotations at the nodes and dislocations in the elements when plastic hinges occur. Newmark-${\beta}$ method is adopted in the time marching process. The interaction diagram of each element is treated as the yield surface for the element and the associated flow rule is enforced as plastic flow occurs. The method provides good prediction of dynamic response of elasto-plastic arches while requiring small core storage and short computer time.

• Journal of Ginseng Research
• /
• v.18 no.1
• /
• pp.53-59
• /
• 1994

To develop the methodology of the quantitative analysis of saponin in ginseng milk, conditions of the saponin extraction were optimized using the fractional factorial design with 3 variables and 3 levels by a RSM computer program. The extraction of saponin increased with an increase in extraction temperature up to $90^{\circ}C$ and then decreased significantly at $100^{\circ}C$. Extraction time affected the saponin yield in a similar trend. On the other hand, decreasing cooling temperature increased the amount of the saponin extracted. Recovery yield of the saponin from ginseng milk varied from 70.0% to 92.9%. The optimum extraction temperature, time and cooling temperature determined by partial differentiation of the model equation were $86^{\circ}C$, 2.83 hrs and $4^{\circ}C$, respectively. Key words Ginseng milk, saponin, response surface methodology.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.1
• /
• pp.14-25
• /
• 2006

Response of grain yield and milled-rice protein content to nitrogen (N) rates at various growth stages is critical for quantifying real-time and real-amount of applied N requirement for target grain yield and protein content. An experiment including 10 N rate treatments at transplanting, tillering and panicle initiation stages with four rice cultivars in 2003, 6 N treatments with two rice cultivars in 2004 and 2005 was conducted. Increase of N rates at PIS significantly increased both grain yield and milled-rice protein content but increase of N rates at tillering stage significantly increased grain yield but not milledrice protein content. Therefore, high grain yield and low milled-rice protein content would be difficult to obtain only by adjusting N rates at PIS. Internal N use efficiency (INUE) was 60.5 kg grain/kg N accumulation on an average over N treatments, cultivars, and experimental years, showing considerable reduction especially at high shoot N accumulation in the experimental year of low sunshine duration. Milled-rice protein content tended to increase almost linearly with increasing shoot N accumulation, but it revealed big variation even at the same shoot N accumulation at harvest. Milled-rice protein content decreased with increasing INUE. N accumulation in the milled rice increased at an almost constant proportion of 45.5 percent of the shoot N accumulated at harvest, showing slight decresing proportion with the increasing shoot N accumulation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.1
• /
• pp.1-13
• /
• 2006

Response of grain yield and milled-rice protein content to nitrogen topdress (N) timing at panicle initiation stage (PIS) is critical for quantifying real-time N requirement for target grain yield and milled-rice protein content. Two split-split-plot experiments with three replications, one in 2004 and the other in 2005, were conducted in Experimental Farm, Seoul National University, Suwon, Korea. The experiments included three N rates at tillering stage (TS), three N timing treatments at panicle initiation stage (PIS) and two rice cultivars. The N rates at TS, N timing at PIS, and rice cultivars were randomly assigned to main plot, sub plot, and sub-sub plot, respectively. Results showed that the delayed N application at PIS reduced grain yield in 2004 and increased milled-rice protein content in both years significantly at 0.05 probability level. The calculated optimum N timing at PIS from pooled data by N rates and rice cultivars in two years was at 28 days before heading (DBH). However, real-time of N timing at PIS was dependent on plant growth and N status around PIS that in turn was dependent on applied N rates at TS. The optimum N timing at PIS was at 30 DBH for no N treatments at TS while at 27 DBH for 3.6 and 7.2 kg N/10a treatments and at 27 and 29 DBH for Hwaseongbyeo and Daeanbyeo, respectively. In general, earlier applied N at PIS resulted in lower milled-rice protein content but the highest grain yield was expected to be obtained when N topdress at PIS was applied at the time when shoot N concentration started to drop below about 23 mg/g due to dilution effect after transplanting. In conclusion, the results of our experiments imply that the currently recommended N topdress time (24DBH) at PIS in Korea should be reconsidered for the higher grain yield and the better quality of rice.

• Korean Journal of Soil Science and Fertilizer
• /
• v.50 no.6
• /
• pp.509-519
• /
• 2017

Crop simulation models are valuable tools for estimating crop yield, environmental factors and management practices. The objective of this study was to evaluate the effect of soil types on barley productivity using CERES (Crop Environment REsource Synthesis)-barley, cropping system model. So the behavior of the model under various soil types and climatic conditions was evaluated. The results of the sensitivity analysis in temperature, $CO_2$, and precipitation showed that soil types had a direct impact on the simulated yield of CERES-barley model. We found that barley yield in clay soils would be more sensitive to precipitation and $CO_2$ in comparison with temperature. And the model showed limited accuracy in simulating water and nitrogen stress index for soil types. In general, the barley grown on clay soils were less sensitive to water stress than those grown on sandy soils. Especially it was found that the CERES model underestimated the effect of water stress in high precipitation which led to overprediction of crop yield in clay soils. In order to solve these problems and successfully forecast grain yield, further studies on the modification of the water stress response of crops should be considered prior to use of the CERES-barley model for yield forecasting.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.31 no.4
• /
• pp.50-58
• /
• 1989

An approach to irrigation scheduling for chinese caggage is presented, and a crop yield response function to soil moisure is derived from irrigation experiments, based on a root- zone water balance method. The paper concludes that crop yield can be estimated by allowable depletion and actual evapotranspiration in 3 cropping stages, and presents the optimal allowalbe depletion, irriga- tion frequency and the amount of irrigation water to get the maximum crop yield and opti- mal irrigation policy.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.13 no.2
• /
• pp.132-138
• /
• 1993

Yield and plant constituent responses of forage sorghum cultivars have usually been compared in uniform defoliation management test. However the influence of harvest time on differential response of cultivars needs more precise definition. Therefore this study with sorghum-sorgo-sudan hybrid cv. NC+Sweet Leaf, and Super Su 22 and Sorghum-Sorghum hybrid cv. Pioneer 931 was carried out under two defoliation regimes, namely defoliation at heading stage of each variety and defoliation on the same calendar date in response to heading stage of early variety. The results are summarized as follows; 1. Three harvests were taken by early variety with 80 days and two harvests by late variety with 94 days from sowing to heading. 2. Dry matter and TDN yield tend to be higher when the plants are cut at ear emergence stage of late variety. 3. Crude protein content was similar for the same growth growth stage of 1st growth and 1st regrowth, and rather big different between varieties. 4. Considering only dry matter and TDN yield, it is recommendable to cut two times at ear emergence stage of late variety and also three times at ear emergence stage of early variety in view point of utilization period extension and distribution of forage products.

• Korean Journal of Organic Agriculture
• /
• v.12 no.1
• /
• pp.93-99
• /
• 2004

This study were conducted to determine the optimum warm casting rate(0, 100, 200, 300, 400, 500kg/10a) for the yield of food canna in jeju island. The plant height was ranged from 109.4 to 1347cm as organic fertilizer of worm casting increased from 0 to 500kg/10a, but it was no significance between 400 to 500kg/10a. Leaf length, leaf width, number of leaves, number of tillers and bulb per plant were shown higher as the amount of worm casting was increased. Stem diameter were the same trend with plant height response. Fresh yield of food canna increased significantly 134 to 22.6MT/ha as fertilizer rate increased from 0 to 500kg/10a. Fresh weight of above-ground pan and blub were shown the same trend with fresh yield of food canna.