• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권1호
• /
• pp.66-76
• /
• 2017

This paper is concerned with investigating the plastic material properties of steel plate formed by line heating method, and is aimed at implementing more rational design considering the accidental limit states such as collision or grounding. For the present study, line heating test for marine grade steel plate has been carried out with varying plate thickness and heating speed, and then microscopic examination and tensile test have been carried out. From the microscopic, it is found that the grain refined zones like ferrite and pearlite are formed all around the heat affected zone. From the tensile test results, it is seen that yield strength, tensile strength, fracture strain, hardening exponent and strength coefficient vary with plate thickness and heat input quantity. The formulae relating the material properties and heat input parameter should be, therefore, derived for the design purpose considering the accidental impact loading. This paper ends with describing the extension of the present study.

• Journal of Electrical Engineering and information Science
• /
• 제2권5호
• /
• pp.114-120
• /
• 1997

A design method is newly presented for the creation of planar type filters which shapes will be nonuniform transmission line with continuously varying characteristic impedances. Those filters yield frequency characteristics of the bandstop filter in transmission, and have not nay discontinuities. The design is achieved by the control of wave propagation in view to both reflection an transmission properties on the dispersive nonuniform line within the desired frequency band. The developed algorithm is based on optimized perturbations of inherent nulls of lobes from the solution of first-order nonlinear differential equation for reflection coefficients of the nonuniform line, and an appropriate distribution of reflection coefficient which affects to filter length and bandwidth. Practical measurements for designed wideband microstrip and stop filter show very good agreement with theoretical results.

• 대한토목학회논문집
• /
• 제4권4호
• /
• pp.37-48
• /
• 1984

탱크의 수직벽(垂直壁)과 같은 정수압(靜水壓) 형태(形態)의 하중(荷重)을 받는 철근(鐵筋)콘크리트 슬래브의 극한해석(極限解析)을 수행(遂行)하기 위하여 강복선해석(降伏線解析)을 사용(使用)하였다. 슬래브의 직교이방성계수(直交異方性係數)를 사용(使用)하여 등가성(等方性) 및 직교이방성(直交異方性) 철근(鐵筋)의 경우를 모두 고려(考慮)하였으며 여러 가지 단조건(端條件)을 고려(考慮)하였다. 강복선해석(降伏線解析)은 가상(假想)일의 원리(原理)를 사용(使用)하여 수행(遂行)하였으며, 종래(從來)의 대각선(對角線)메카니즘에 비하여 좀 더 실제적(實際的)인 부채꼴메카니즘을 포함하여 4가지 붕괴(崩壞)메카니즘들에 대하여 고려(考慮)하였다. 해석결과(解析結果)는 부채골메카니즘들이 지금까지의 정수압(靜水壓)을 받는 철근(鐵筋)콘크리트 슬래브에 사용(使用)되었던 간단한 대각선(對角線)메카니즘들에 비하여 복잡하였으며, 특(特)히 본(本) 연구(硏究)에서는 Horton의 연구(硏究)를 확장(擴張)하여 제약조건(制約條件)을 받는 다변수(多變數) 비선형(非線型) 최적화문제(最適化問題)로 형성(形成)한 후 the Rosen-Brock Hillclimb Procedure Program에 의하여 해(解)를 구하였고 그 결과(結果)는 조래(從來)의 다른 메카니즘들에 비하여 정밀(精密)하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.480-483
• /
• 1998

For memory products, it is very important to develop a new production line as soon as possible. All products are inspected to get rid of defected products at the last testing stage. Those inspection data are called FCM. In this paper, based on the FCM data, Area Usage Factor (AUF) analyzing method will be proposed. Process engineers can make up their mind to which direction they should concentrate their analyzing power.

• 동의생리병리학회지
• /
• 제21권6호
• /
• pp.1506-1512
• /
• 2007

In order to investigate the totale yield, the content of soluble polysaccharide and the others of FEW extract from the yeast fermentated Ganoderma lucidium by supersonic method, the yeast strain was inoculated after pretreatment and subsequently followed fermentation and supersonic extract. The main construction of the extract method is composed of the main glucose and together with the xylose, fucose, galactose and mannose. Results show that because of the generated lactic acid and ethanol, pH value of extract decreases and the safety as well as the preservation is improved. The extract yield, the total soluble polysaccharide, SOD-like activity, cytotoxic effect and growth inhibitory effect against cancer cell line are much higher in FE method than RE method, especially FEW3 extracts fermented during 24hrs. It is concluded that yeast fermentation makes the extract yield increase because of the cell disintegration, the useful ingredients of the germ body, the metabolic products, the insoluble ingredients due to the generation of ethanol, and the cell fragmentation caused by the supersonic waves vibration. Content of generated ethanol, total soluble polysaccharide and extract yield all increase during the fermentation time from 24 to 72 hours and the optimum fermentation condition is at $27^{\circ}C$ for 72 hours. The bitter taste and smell of the Ganoderma lucidium extract is diminished, fragrant-bitter taste and smell is generated so that the whole functional quality is improved.

• 한국작물학회지
• /
• 제46권3호
• /
• pp.241-247
• /
• 2001

우리나라 벼 수량의 기상반응을 종합적으로 검토하여 벼 수량예측모델을 구축하고자 1985년부터 1999년까지 15년간 수행한 20개 지역의 벼 지역적응시험 자료를 이용하여 기상에 대한 수량반응의 최대경계선(boundary line)분석을 하였으며, 이에 근거하여 수량예측모형을 설정하였다. 1. 벼의 생육기간을 영양생장기, 생식생장기, 등숙기로 구분하고 각 발육단계를 15-20일 간으로 구분하여 각 시기의 기상요소에 대한 수량반응의 최대경계선은 평균기온( $T_{a}$ )과 일조시수( $S_{h}$)에 대해서는 지수함수 f( $T_{a}$ )=$\beta$$_{0}$(1-exp(-$\beta$$_1$/$\times$ $T_{a}$ ), f( $S_{h}$)=$\beta$$_{0}$(1-exp(-$\beta$$_1$$\times$ $T_{h}$)로 나타났으며 일교차(Tr)는 2차함수 f( $T_{r}$)=$\beta$0(1-( $T_{r}$-$\beta$$_1$)$^2$)로, 이 식에서 상수항 $\beta$$_{0}$를 제거하여 수량에 대한 각 기상요소의 영향도를 0-1로 나타내는 기상지수로 나타내었다. 2. 각 생육시기의 평균기온, 일조시간 및 일교차에 대한 수량반응의 최대경계선이외에 불임에 의한 등숙률 저하와 그에 따른 수량감소를 고려하기 위하여 Uchijima(1976)가 제안한 냉각도일수(cooling degree day)를 출수전 30일간의 생식생장기에 계산하여 이에 대한 수량과 등숙률 반응의 최대경계선을 계산하였는데 냉각도일수가 증가하면 수량이 감소하는 지수함수로 잘 표현되어 기존의 연구들과 같은 결과였다. 3. 기상지수는 벼의 생육기간을 영양생장기, 생식생장기 및 등숙기로 구별하고 각 시기별로 수량 기상지수를 각 기상요소 기상지수를 기하평균하여 산출하였는데 각 시기별 수량기상지수의 수량변이 설명도는 각각 0.383-0.430, 0.460-0.534, 0.4603-0.587로 결정계수는 영양생장기＜생식생장기＜등숙기의 순으로 컸다. 4. 최대경계선 분석방법을 통하여 얻어진 각 생육시기별 수량기상지수를 기하평균하여 구한 종합수량기상지수와 수량과의 직선회귀식을 구하여 수량예측모형(Model I, II, III)을 작성하였다. Model I, II, III)은 각각 결정계수가 0.6512, 0.6703, 0.6129로 모든 생육단계에 걸쳐서 기간을 15-20일 단위로 세분하여 모든 기간의 수량에 대한 기상지수를 고려하여 전 생육기간의 종합수량기상지수를 산출한 Model II가 기상변화에 따른 수량변이의 설명도가 가장 높았다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제10권6호
• /
• pp.571-575
• /
• 2005

A simple, but effective on-line method for estimating the mycelial cell mass concentration from agitation speed data, a most readily-available process variable, has been developed for DO-stat cultures of Agaricus blazei. The dynamic change of dissolved oxygen concentration (DOC) in the initial transient period and the change in yield were considered in the development of the estimation algorithm or estimator. Parameters in the estimation algorithm were calculated from the agitation speed data at 20% of DOC. The proposed estimator could accurately predict the cell mass concentration regardless of DOC levels in the tested range of $10{\sim}40%$, showing a good extrapolation capability.

• 한국유체기계학회 논문집
• /
• 제6권1호
• /
• pp.44-50
• /
• 2003

Flow through a turbine flow meter is simulated by solving the incompressible Navier-Stokes equations. The solution method is based on the pseudo-compressibility approach and uses an implicit-upwind differencing scheme together with the Gauss-Seidel line relaxation method. The equations are solved steadily in rotating reference frames, and the centrifugal force and the Coriolis force are added to the equation of motion. The standard $k-{\epsilon}$model is employed to evaluate turbulent viscosity. Computational results yield quantitative as well as qualitative information on the design of turbine flow meters by showing the distributions of pressure and velocity around the turbine blades.

• 전자공학회논문지A
• /
• 제28A권11호
• /
• pp.874-879
• /
• 1991

The effect of air gap between specimen and jig on the material constant (permittivity, permeability) and attenuation characteristics of electromagnetic wave absorbers in the coaxial line method was investigated. The presence of a air gap made both permittivity and permeability measured lower than true value, and the tendency was greater in the case of permittivity. An inner gap compared to an outer gop was found to yield a larger difference between measured and true values. The effect of air gap was measured for a Ni0.3Zn0.7Fe2O4, with the gap eliminated by metallizing with Ag-paste. The measured characteristics were in good agreement with corrected values by calculation.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 추계학술대회 논문집
• /
• pp.552-557
• /
• 2001

Copper slag is the by-producted material on the proceeding of refining the copper. To verify applications of copper slag to vertical drain material can substitute for the sands in ground improvement, laboratory soil tests and consolidation model tests were conducted. The results of consolidation model test was analyzed as the hyperbolic method. The hyperbolic method assumes that the settlement(s) versus time(t) behavior approaches a straight line describes a hyperbolic reaction. The inverse of the slope of the line would then yield the ultimate settlement. Through in this study, copper slag is compatible with vertical drain material as like sands. Copper slag compaction pile promote the consolidation settlement.