• Korean Chemical Engineering Research
• /
• 제55권4호
• /
• pp.510-513
• /
• 2017

Patchouli oil extraction in general is still using conventional methods that require a long time of extraction. It is therefore necessary to develop extraction methods to obtain patchouli oil with optimum yield and quality. One of the new methods, which has been successfully developed, is microwave hydrodistillation (MHD). In addition to optimizing the extraction process of patchouli oil, this study also used microwave air-hydrodistillation (MAHD). Based on the research results, extraction using MAHD method can produce higher yield of patchouli oil when compared using MHD method. Also, based on the results of the analysis by GC-MS, extraction using MAHD method can produce quality of patchouli oil that is almost the same when compared using MHD method. This is supported by the results of the analysis by GC-MS, which showed that the content of patchouli alcohol is the main component of patchouli oil, and is almost the same for patchouli oil extracted using MHD method (26.32%) and MAHD method (25.23%).

• 생약학회지
• /
• 제4권4호
• /
• pp.173-179
• /
• 1973

Tobacco, which has nicotine for its main component, has been in medical use for a long time and in great demand for smoking throughout the world. The purpose of this study is to control nicotine amount and to increase yield more efficiently by the method of systematic variations. Nutrient solutions for tobacco culture were designed and prepared in 10 kinds with mineral ions: $NO_{3^-},\;SO_{4^{--},\;PO_4{^{-3},\;K,{^+}\;Ca,{^{++}\;Mg,{^{++}$, Mn, B, Cu, Zn, Mo, and Fe. Nicotiana tabacum L. Yellow Special A, grown for 50days from sowing, was replanted in plastic pot and cultured for 65 days supplying with prepared nutrient solutions. After harvest, their nicotine amount was determined by means of acid-base titrimetry and gas chromatography. The tobacco plants in KCa 4 and KMg 9 groups demonstrated the highest yield in total leaves weight and KMg 7 group in average nicotine amount. They have shown the increase of nicotine amount from lower leaf to 16th leaf, and thereafter decreased gradually. The author also pursued the optimum ionic proportions for the absolute nicotine amount in tobacco by means of systematic variations method.

• 한국의류산업학회지
• /
• 제7권1호
• /
• pp.96-100
• /
• 2005

The bleaching is one of the worst factors which leads to the damage of the human hair. The cuticle of the human hair is injured by the alkali that is one of the chief ingredients of a bleaching agent. The alkali component of the bleaching solution chemically reacts with human hair, reducing the tenacity and dissolving the cuticle layer. The purpose of this study is to examine the effects of bleaching time and temperature on the physical properties and morphology. The results were as follows. 1. The stress-strain curves for human hair indicated the three distinct regions, such as Hookean region, Yield region and post-Yield region. The tenacity of hair is reduced gradually with an increase of bleaching time. Under these same conditions, elongation of the hair increased. 2. The greatest drop in tenacity for hair occured between $40^{\circ}C$ and $60^{\circ}C$ of bleaching temperature. 3. Compared with the virgin hair, bleached hair showed a slower rate of weight reduction in the TGA thermogram. The rate decreased gradually as the bleaching time and temperature increased. 4. As the bleaching conditions reached time and temperature extremes, the human hair cuticle became more damaged. The cuticle layers seemed to have dissolved, as seen in the SEM photographs.

• 한국작물학회지
• /
• 제23권2호
• /
• pp.61-67
• /
• 1978

(1) 배수조건별 시비량과 재식밀도를 증가함에 따라 수수, 일수입수가 증가하는 경향이었고 암거배수가 무배수보다 수수는 적었으나 일수입수는 많았다. (2) 등숙비율, 등숙도, LWR도 암 영배수에서 좋았고 시비량과 재식밀도를 높일수록 단위면적당 높은 경향이었다. (3) $\alpha$-Na산화력은 암 배수가 각처리 모두 높았고 일정면적당 근활력은 다비밀식일수록 증가 경향이었으며 무배수구는 N 30kg에 80주처리에서 높았다. (4) 1일 32mm의 수직배수로 인한 양분용설로 암거 배수구가 무배수구에 비하여 초기생육은 부진했으나 후기 생육상에 호전을 보여 동화물질의 축적, 엽면적등에 높은 수치을 보였고 시비량을 증가할수록 높았으며 재식밀도를 높여줌에 따라선 주당묘수간에는 낮았으나 $m^2$당간에는 높았다. (5) 이상의 결과 10a당 수량은 암거배수가 무배수보다 8% 증수하였고 시비량 및 재식밀도를 증가함에 따라 증수하였다.

• 한국자동차공학회논문집
• /
• 제5권6호
• /
• pp.64-76
• /
• 1997

This paper deals with development of brackets by using aluminum alloy sheets which is indispensable for weight reduction of autobody. The press formability of aluminum alloy sheet is estimated by means of tensile test, V bending test, sample manufacturing test and photograph of microstructure. The results show that the elongation, strength, work hardening exponent, plastic anisotropy coefficient of Al 6***series are better than those of Al 5***series, but for general press formability, Al 5***series are better than Al 6***series due to lower yield strength. Since most of mechanical properties of aluminum sheet are generally inferior to those of cold-rolled steel sheet, shape fixability and press formability of aluminum sheet are very poor. For making components of autobody by use of die for steel sheet application, it is essential that die should be nodified for least bending and stretching. With the modified die for aluminum, it could be possible to make brackets, the component of autobody. Microstructure of Al 5***series has fine grain and small the 2nd phase and that of Al 6***series has relatively coarse grain. Therefore, it seems that fine grain and small the 2nd phase of Al 5***series is one of the factor of lower yield strength, resistance to stamping work, formation of Luder's line.

• Bulletin of the Korean Chemical Society
• /
• 제30권6호
• /
• pp.1293-1296
• /
• 2009

A new series of N-substituted 2-n-butyl-3-fluoropyrroles were prepared by a simple one-pot reaction designed of retrosynthesis. $\alpha,\alpha-Difluoro-\gamma-iodo-\gamma$-(trimethylsilyl)propyl n-butyl ketone, a component precursor molecule to 2-n-butyl-3-fluoropyrroles, was prepared with Cu(0) catalyst. It reacted with various primary amines to yield N-substituted 2-n-butyl-3-fluoropyrroles. The products were synthesized via a one-pot reaction scheme between $\alpha,\alpha-Difluoro-\gamma-iodo-\gamma$-(trimethylsilyl) propyl n-butyl ketone and primary amines in excess ( $\geq$ 5 molar equivalence), which eliminate the need of KF required in obtaining n-butyl-1H-3-fluoropyrrole. The yield of products depended reversely on spatial bulkness around N-binding carbon.

• Earthquakes and Structures
• /
• 제3권5호
• /
• pp.749-766
• /
• 2012

Structural control through integration of passive damping devices within the building structure has been increasingly implemented internationally in the last years and has proven to be a most promising strategy for earthquake safety. In the present paper an alternative configuration of an innovative energy dissipation mechanism that consists of slender tension only bracing members with closed loop and a hysteretic damper is investigated in its dynamic behavior. The implementation of the adaptable dual control system, ADCS, in frame structures enables a dual function of the component members, leading to two practically uncoupled systems, i.e., the primary frame, responsible for the normal vertical and horizontal forces and the closed bracing-damper mechanism, for the earthquake forces and the necessary energy dissipation. Three representative international earthquake motions of differing frequency contents, duration and peak ground acceleration have been considered for the numerical verification of the effectiveness and properties of the SDOF systems with the proposed ADCS-configuration. The control mechanism may result in significant energy dissipation, when the geometrical and mechanical properties, i.e., stiffness and yield force of the integrated damper, are predefined. An optimum damper ratio, DR, defined as the ratio of the stiffness to the yield force of the hysteretic damper, is proposed to be used along with the stiffness factor of the damper's- to the primary frame's stiffness, in order for the control mechanism to achieve high energy dissipation and at the same time to prevent any increase of the system's maximum base shear and relative displacements. The results are summarized in a preliminary design methodology for ADCS.

• Earthquakes and Structures
• /
• 제7권5호
• /
• pp.817-842
• /
• 2014

ASCE/SEI 41-13 provides modeling parameters and numerical acceptance criteria for various types of members that are useful for evaluating the seismic performance of reinforced concrete (RC) building structures. To accurately evaluate the global performance of a coupled wall system, it is crucial to first properly define the component behaviors (i.e., force-displacement relationships of shear walls and coupling beams). However, only a few studies have investigated on the modeling of RC coupling beams subjected to earthquake loading to date. The main objective of this study is to assess the reliability of ASCE 41-13 modeling parameters specified for RC coupling beams with various design details, based on a database compiling almost all coupling beam tests available worldwide. Several recently developed coupling beam models are also reviewed. Finally, a rational method is proposed for determining the chord yield rotation of RC coupling beams.

• 한국기계가공학회지
• /
• 제9권5호
• /
• pp.57-63
• /
• 2010

Tolerance analysis is one of the most important processes to improve the image quality of products. High resolution camera module for mobile phones needs precision assembly technology since the module becomes smaller and thinner. This paper will focus on the unit tolerance and the assembly tolerance which can affect the performance of the module. Lens shading and relative illumination were used to evaluate the optical axis scatter for each component on camera and estimate the assembly yield rate based on the evaluation result. A program was developed to analyze the impact on optical axis by each module, then to optimize the dimensions and tolerance for reducing the scatter of optical axis assembly. Through the simulation, though a rate of relative illumination was declined in where optical axis is displaced $100{\mu}m$ from sensor center, MTF performance is not influenced by increasing in optical axis displacement. It was seen that assembly yield was improved in result of simulation after correcting optical axis tolerance.

• Plant Resources
• /
• 제3권3호
• /
• pp.226-232
• /
• 2000

The availability of enokitake cultural waste for Lentinus edodes cultivation was investigated, although hardwood sawdust has traditionally been used as a substrate for this fungus. Firstly, physiochemical characteristics of cultural waste were analysed. Secondly, mycelial growth characteristics and fruiting yields of L. edodes on waste treated in some methods were determined. Physiochemical characteristics of enokitake cultural waste showed that the millwaste complex was a little degraded by enokitake fungus and suggested the probability that most component lost by enokitake could be rice bran. Mycelia of L. edodes grew and fruited well on waste supplemented by fresh rice bran and Quercus sawdust although didn't on waste only. Mycelial growths of these fungi on waste were accelerated when supplemented by rice bran to the percent of 40(w/w) but decreased or suppressed at above ratios(30, 40%, w/w). Supplementations of oak sawdust at above 40%(w/w) of the waste and rice bran at 20%(w/w) of the sawdust allowed such a good mycelial growth as to be selected as a pertinent mixing ratio for fruiting medium. A fruiting yield on enokitake cultural waste supplemented by oak sawdust (at 40% of the waste, w/w) and rice bran (at 20% of the sawdust, w/w) was not inferior to that on oak sawdust supplemented by rice bran only (at 20% of the sawdust, w/w). These results indicated strongly the potentiality of enokitake cultural waste as raw materials for shiitake cultivating substrates.