• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.246-247
• /
• 2000

Yb$^{3+}$ 이온은 InGaAs LD 및 Ti:sapphire 레이저로 펌핑할 수 있는 940 nm에서의 흡수대를 가지고 있고, 1.03 $mu extrm{m}$의 형광방출 특성을 가지고 있으며, 지금까지 알려진 1 $\mu\textrm{m}$ 파장대의 레이저 활성이온 중에서 가장 적게 열을 발생하는 특성을 가지고 있음이 알려져 최근에는 Yb$^{3+}$ 이온을 첨가한 여러 가지 레이저 매질이 연구되고 있다.[1] 그 중에서도 Yb$^{3+}$ ion doped yttrium aluminum garnet (Yb:YAG) 단결정은 충분하게 넓은 흡수선폭, 좋은 열광학적 특성, 고출력 작동을 하게 하는 stokes shift, 그리고 LD에 의한 펌핑을 가능하게 하는 940 nm 영역에서의 흡수 및 긴 여기시간을 가진 이상적인 매질로 알려져 있다.[2] 이러한 특성으로 인해 Yb:YAG 단결정은 femtosecond 레이저 등 각종 레이저 시스템의 소형화[3]를 가져왔으며, 레이저 결정의 양산 가능성 및 레이저 기기의 소형화에 따르는 시스템의 가격 감소가 가능하므로 Yb:YAG microchip 레이저는 향후 고출력 레이저 기기 산업의 중추가 될 것으로 기대된다. (중략)

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.365-368
• /
• 2001

입사면에서 발생하는 열을 효율적으로 제거하기 위하여 Yb:YAG 결정의 표면에 sapphire 창을 부착하여 레이저를 발진 시켰다. Yb:YAG 결정에서 발생하는 열이 sapphire 창을 통하여 구리판으로 전달되는 경우 와 Yb:YAG 결정의 측면에서 냉각하는 경우의 레이저 출력을 측정하여 각각의 레이저 발진 특성을 비교하여 보았다. 여기면을 sapphire 창으로 냉각하는 micro-chip Yb:YAG 레이저의 레이저 에너지 전환 효율은 38%였으며 레이저 발진 문턱값은 4 kw/mm$^2$, slope efficiency는 56%로 측정되었다. Sapphire 창을 사용하는 경우 표면에서의 열전달도는 10 W/mm$^2$이상으로 관측되었다. Yb:YAG의 도핑율, 출력경의 반사율 등을 레이저 변수를 최적화할 경우 같은 구조에서 50 W급 레이저도 발진 가능할 것으로 예상된다.

• Korean Journal of Optics and Photonics
• /
• v.26 no.6
• /
• pp.312-317
• /
• 2015

We investigate the effect of laser-resonator mode size on the output of a Yb:YAG laser that is mode-locked by a semiconductor saturable absorber mirror (SESAM). We demonstrate that the smaller the product of the mode sizes at a SESAM and at a Yb:YAG crystal, the more stable the mode-locked output is. Also, we found numerically that there is a resonator length at which the mode-locked output occurs, regardless of the thermal lens effect of a Yb:YAG.

• Korean Journal of Optics and Photonics
• /
• v.32 no.5
• /
• pp.209-214
• /
• 2021

High-power continuous-wave operation of a Yb-doped double-clad fiber laser at 1018 nm, pumped by high-power diode lasers at 976 nm, is reported. Based on numerical calculation of the gain and laser signal power along the length of the Yb fiber, it is found that robust operation at 1018 nm can be achieved for a high Yb³⁺-ion excitation density greater than 11.5%, accompanied by high suppression of the feedback from the fiber's end facet. The Yb fiber laser constructed in house yields 626 W of continuous-wave output at 1018 nm for 729 W of incident pump power, corresponding to a slope efficiency of 86.6%. The prospect for power scaling is considered.

• Korean Journal of Optics and Photonics
• /
• v.26 no.1
• /
• pp.38-43
• /
• 2015

We propose a linearly polarized long-cavity Yb:YAG laser with a variable-reflectivity output coupler and investigate its output characteristics. The variable output coupler consists of a polarized beam splitter and a quarter-wave plate. The linearly polarized laser has a long cavity length of about 3.7 m. The slope efficiency of the proposed laser is 19%, and the beam quality ($M^2$) is about 1.2.

• Korean Journal of Optics and Photonics
• /
• v.27 no.3
• /
• pp.95-100
• /
• 2016

High-power quasi-continuous-wave (qcw) operation in Yb-doped double-clad fiber lasers with near-diffraction-limited quality of the output beam is reported. Based on numerical simulation, we built a simple, all-fiberized Yb fiber laser, and a fiber-based master-oscillator power amplifier (MOPA). Both laser systems have successfully produced qcw output with average power greater than 150 W at 1080 nm and 10 ms pulse duration at 10 Hz repetition rate, corresponding to a peak power greater than 1.5 kW for 205 W of pump power at 976 nm. Laser performance, including beam quality and slope efficiency, was characterized in both configurations. Prospects for power scaling and applications are discussed.

• Korean Journal of Optics and Photonics
• /
• v.25 no.2
• /
• pp.90-94
• /
• 2014

We propose a Yb:YAG laser Q-switched by a semiconductor saturable absorber and a laser output coupler composed of a polarizer and a quarter-wave plate, and we investigate the output characteristics of the proposed Q-switched laser. We show that the laser power can be varied by rotation of the quarter-wave plate.

• Korean Journal of Optics and Photonics
• /
• v.32 no.4
• /
• pp.147-152
• /
• 2021

We report high-power continuous-wave operation of a Yb-doped fiber laser at 1070 nm, pumped by high-power laser diodes at 976 nm. Based on theoretical calculation of the stimulated Raman scattering and temperature distribution in the fiber, we construct a bidirectionally pumped Yb-fiberlaser system incorporating a pair of fiber Bragg gratings and a cladding light stripper. The fiber laser yields 3.0 kW of continuous-wave output at 1070 nm in a diffraction-limited beam with M² ≈ 1.26 for 4.1 kW of incident pump power, corresponding to a slope efficiency of 81.5%. The prospects for further power scaling are discussed.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.11a
• /
• pp.129-132
• /
• 2000

Perdeuterated hexaflouroacetyIacetonato-ytterbium $[Yb(HFA-D)_3]$ complexes were synthesized by the keto-en01 tautomerism reaction of $Yb(HFA-D)_3$ in methanol-$d_4$ in order to reduce the radiationless transition to the ligands. The luminescence properties of $Yb(HFA-D)_3$ complex were measured in the following anhydrous deuterated organic solvents ; Acetone-$d_6$, Methanol -$d_4$, THF-$d_6$, PO$(OHC_3)_3$ and DMSO-$d_6$. The intensity, lifetime and quantum efficiency of the luminescence in DMSO-$d_6$ were superior to those in other deuterated solvents. It was suggested that the anhydrous DMSO-$d_6$ might be the most appropriate solvent for the liquid laser material of $Yb(HFA-D)_3$ complex.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.129-132
• /
• 2000

Perdeuterated hexafluoroacetylacetonato -ytterbium [$Yb (HFA -D)$_3$_3$] complexes were synthesized by the koto-enol tautomerism reaction of $Yb(HFA-H)_3$ in methanol-$d_4$, in order to reduce the radiationless transition to the ligands. The luminescence properties of $Yb(HFA-D)_3$ complex were measured in the following anhydrous deuterated organic solvents : Acetone-$d_6$, Methanol-$d_4$, THF-$d_8$, $PO(OC$H_3$)_3$ and DMSO-$d_6$. The intensity, lifetime and quantum efficiency of the luminescence in DMSO-$d_6$ were superior to those in other deuterated solvents. It was suggested that the anhydrous DMSO-d$_{6}$ might be the most appropriate solvent for the liquid laser material of $Yb(HFA-D)_3$ complex.x.