• The Journal of Korea Robotics Society
• /
• v.13 no.4
• /
• pp.265-271
• /
• 2018

The recent prosthetic technologies pursue to control multi-DOFs (degrees-of-freedom) hand and wrist. However, challenges such as high cost, wear-ability, and motion intent recognition for feedback control still remain for the use in daily living activities. The paper proposes a multi-channel knit band sensor to worn easily for surface EMG-based prosthetic control. The knitted electrodes were fabricated with conductive yarn, and the band except the electrodes are knitted using non-conductive yarn which has moisture wicking property. Two types of the knit bands are fabricated such as sixteen-electrodes for eight-channels and thirty-two electrodes for sixteen-channels. In order to substantiate the performance of the biopotential signal acquisition, several experiments are conducted. Signal to noise ratio (SNR) value of the knit band sensor was 18.48 dB. According to various forearm motions including hand and wrist, sixteen-channels EMG signals could be clearly distinguishable. In addition, the pattern recognition performance to control myoelectric prosthesis was verified in that overall classification accuracy of the RMS (root mean squares) filtered EMG signals (97.84%) was higher than that of the raw EMG signals (87.06%).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.46 no.2
• /
• pp.367-374
• /
• 2022

Herein, a highly elastic e-textile band with a two-wire transmission line was designed and fabricated for smart clothing applications. A conductive yarn with a very uniform low electrical resistance of 0.0357 Ω/cm was developed and used for the signal and ground lines. To control the elasticity of the e-textile band, spandex yarns were added in the warp direction during knitting and the tension was adjusted. As the length of the e-textile band increased, its RF performance deteriorated. Furthermore, the frequency corresponding to -3 dB S21 was lower in the 30% stretched band than in the unstretched band. For the e-textile bands with lengths 10, 50, and 100 cm, the frequencies corresponding to -3 dB S21 were 107.77, 24.56, and 13.02 MHz when not stretched, and 88.74, 22.02, and 12.60 MHz when stretched by 30%. The fabricated bands were flatter, more flexible, and more elastic than transmission line cables; thus, they can be easily integrated into wearables and smart clothing. However, to increase RF performance and achieve optimum utilization, future studies must focus on the fabrication of transmission lines with lower resistance and reduced distance between the signal and ground lines, and thus the number of transmission lines can be increased.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.47 no.1
• /
• pp.191-213
• /
• 2023

Romans in the fifth and sixth centuries BC referred to the people who brought silk from the Far East via the pre-Han (漢) silk road as "Seres". The Seres' colorful silk was characterized by intricate patterns and high yarn density, markedly different than thin "China silk". This study examined geographic and genealogic records and linguistic evidence and found support for the syllogistic conclusion that the "Seres" were the early Silla people. The Seres' territory in the seventh century BC was much larger than that of the Qin (秦) or Zhou (周), extending from Xinjiang to Balhae. According to literature records, Dong-Yi (東夷) invented Geum (錦) silk in the 11th century BC around Balhae, where silkworm trees were abundant. In the Han dynasty, even thin silk was rare and expensive, but in Gojoseon (古朝鮮), Geum silk was common and less valuable than beads. The Silla delivered surplus Geum silk, fur, and high-quality iron to the West. Linguistic evidence includes historical names for Silla: "Sira," "Saro," and "Sere," as well as records naming King Ruri of Silla "Seri-Ji"; and the replacement of the word "Seres" by the word "Silk" from the Goguryeo word for "yarn winder": "sil-kkury".

• Science of Emotion and Sensibility
• /
• v.15 no.2
• /
• pp.201-208
• /
• 2012

The objectives of this study were to investigate the psychoacoustic properties of PTFE(Poly tetra Fluoroethylene) laminated vapor permeable water repellent fabrics which are frequently used for sportswear, to examine the relationship among fabrics' basic characteristics, mechanical properties and the psychoacoustic properties, and finally to propose the predicting model to minimize the psychoacoustic fabric sound. A total of 8 specimens' frictional sound were recorded and Zwicker's psychoacoustic parameters such as loudness(Z), sharpness(Z), roughness(Z), and fluctuation strength(Z) were calculated using the Sound Quality Program. Mechanical properties of specimens were measured by KES-FB system. Loudness(Z) of specimen D-1 was the highest, which means the rustling sound of the specimen D-1 was the most noisy. Statistically significant difference among film type was observed only in loudness(Z) for fabric sound. Based on ANOVA and post-hoc test, specimens were classified into less loud PTFE film group (groupI) and loud PTFE film group (groupII). Loudness(Z) was higher when staple yarn was used compared when filament yarn was used. According to the correlation between the mechanical properties of fabrics and loudness(Z) in groupI, the shear properties, compression properties and weight showed positive correlation with loudness(Z). According to the regression equation predicting loudness(Z) of groupI, the layer variable was chosen. In groupII, variables explaining the loudness(Z) were yarn types and shear hysteresis(2HG5).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.3
• /
• pp.448-458
• /
• 2010

Kenaf has a rigid and rough touch that inhibits the use of it as a textile material; therefore, this study developed a novel textile material using kenaf. Kenaf and cotton were blended in the ratio of 3:7 and manufactured as 20' spun yarn that was compared to 20's spun yarn made of 100% cotton. Both kenaf/cotton-blended and 100% cotton spun yarn were constructed as plain woven and knitted fabrics. Four kinds of fabrics were prepared as follows. Plain kenaf/cotton-woven fabrics, plain cotton-woven fabrics, kenaf/cotton jersey, and cotton jersey. A cellulase washing process was carried out to reduce the character of kenaf/cotton-blended fabrics, rigid, and rough touch. All fabrics were pretreated with NaOH. NaOH at the concentrations of 0, 0.25, 1.25, and 2.25mol/L, and cellulase at concentrations of 0, 1, 3 and 5g/L were used since the pretreatment of NaOH has a higher efficiency of weight loss than $Na_2CO_3,\;K2CO_3$ and Triton X-100. The ratio of weight loss, tensile strength, stiffness, drape property, and surface appearance were measured in order to evaluate the efficiency of the washing treatment on fabrics. Kenaf/cotton-blended fabrics exhibited more rigid and rough features than cotton fabrics. A cotton jersey showed significant differences in the degree of stiffness and drape properties. When all fabrics were treated with 1.25mol/L of NaOH and 3g/L of cellulase, kenaf/cotton-blended fabrics showed a higher retention ratio of tensile strength than cotton fabrics after washing despite the increased weight l08s of kenaf-blended fabrics compared to cotton fabrics. The ratio of weight loss for all fabrics was well correlated with flexibility. The washing treatment process made woven fabrics more flexible than knitted fabrics, because the stiffness of woven fabrics made the rubbing actions stronger. Kenaf/cotton-blended fabrics showed a significantly higher ratio of weight loss and more reduction in stiffness than cotton fabrics after the washing treatment. This might be due to the lack of cohesiveness and easy elimination from fabrics. The drape property of kenaf-blended fabrics was superior to cotton fabrics.

• Journal of Sericultural and Entomological Science
• /
• v.47 no.1
• /
• pp.41-47
• /
• 2005

Kayagum is a traditional musical instrument in Korea. Kayagum strings are usually made of raw silk. It needs good vibration and durability. This study was carried out to increase durability of the strings by chemical treatment and manufacture of silk/polyester and silk/wild silk compound yarn. In this study, we used MKW-810(water solube acrylic adhesive)and polyvinyl alcohol as a adhesive. Before the twisting, the raw silk wet on the string manufacture process. The adhesive reagent were added in this process. And compound yarn were prepated by domestic silk, polyester and wild silk(antheraea pernyi) for make of Kayagum strings, respectively. The result are as follows. 1. Tenacity and elongation of the strings are almost same between none and chemical treatment. However number of extension cycling to breaks of the strings was largely increased by chemical treatment. Number of extension cycling to breaks of the strings is very important and useful item to check durability of the strings. The stiffness of the strings were almost same between none and adhesive treatment 2. Tenacity of the silk/polyester strings is largely decreased by increasing of polyester portion, but elongation of the silk/polyester strings increased. However tenacity of the silk/polyester(mono filament) strings are higher than that of silk strings. 3. Tenacity of the domestic silk/wild silk strings is largely decreased by increasing of wild silk portion, but elongation of the domestic silk/wild silk strings is almost same among silk and domestic silk/wild silk strings.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.90-90
• /
• 2012

극세섬유는, 1970년대 말부터 일본의 합섬업체들이 천연소재인 Silk를 모방하기 위해 개발을 시작하였으며, 개발된 섬유의 굵기가 0.5d(1denier=1g/9,000m)이하인 것을 말한다. 이후 극세사에 대한 끊임없는 노력으로, 1980년대에는 천연스웨이드 풍의 인조피혁의 제조가 가능한 0.1d이하급 초극세사가 N/P(Nylon/Polyester) 복합방사된 형태로 개발되었으며, 일본, 및 한국 등에서 이들 소재로 제조된 직편물 제품이 첨단 고부가소재로서 호황을 누려왔다. 이러한 초극세사는 다양한 형태로 발전되어왔는데, 해도형(Islands-in-a-Sea Type), N/P(Nylon/PET), P/N(PET/Nylon) 등이 대표적인 형태이며, 가공공정 중에서 분할이 되면서 그 특성을 발현한다고 하여 분할사, 형태에 따라서 N/P 분할사라 하기도 한다. 최근들어 이러한 N/P 분할사는 기존의 의류용 용도뿐만 아니라, Wiping Cloth, 극세사 타울, 항진드기용 침장 등 다양한 비의류용 소재로도 확대 전개되고 있으며, 이렇게 다양화 되어가고 있는 용도에 따른 공정별 최적 가공 방법에 대한 연구가 진행 중이다. 사가공 공정에 있어서는 텍스쳐링 방법이 적용되기도 하는데, 가장 보편화된 텍스쳐링 방법으로는 DTY(Draw Texturing Yarn), ATY(Air Texturing Yarn) 등의 형태가 있으며, 이러한 텍스쳐링 방법은 물성에 민감한 N/P 분할사의 강도, 신도, 분할도에 영향을 미치게 된다. 본 연구에서는 기존의 텍스쳐링 방법이 아닌 Fancy사 형태로 사가공을 하였으며, 직물로 제직하고, 분할 가공하여 직물로써의 물성까지 분석하였다. Fancy사는 색이나 형의 변화로 디자인효과를 준 실을 말하는데, 심사, 부사, 압사로 이뤄지며 의장사, 장식사 등으로 불려지기도 한다. 주요 공정을 보면, 크릴형성용 부사를 500-600T/M으로 가연한 연사를 얻는 제1공정과, 이 가연된 부사와 심사를 합사하는 제2공정 및 합사된 크릴의 뒤틀림을 방지하기 위하여 압사로 크릴을 고정하여 주는 제3공정으로 이루어진다. 사용된 N/P 분할사는 NP30/36dty, NP50/36dty를 사용하였으며, 부사의 오버피드 및 피드되는 사에 따라 각각 8종, 7종의 Fancy사를 제조하여 섬도(Denier), 강도(Tenacity), 신도(Elongation)를 측정하였다. 또한, 이들 사들로 제직 및 분할가공을 하여 인장강도, 인장신도, 인열강도, 마모강도, 공기투과도 등의 물성과 중량, 두께를 측정하였으며, 온도, NaOH 농도, 시간 등의 분할 가공조건에 따른 직물의 인열강도 변화도 측정하였다. 이렇게 공정별 조건에 따른 물성의 변화분석을 통해 추후 N/P의 제품화 전개에 도움이 되고자 하였다.

• Science of Emotion and Sensibility
• /
• v.24 no.2
• /
• pp.49-56
• /
• 2021

In this study, we investigated the necessary mechanical properties of conductive multifilament yarns for fabricating the electrodes of biosignal measurement pressure and stretch textile sensors using embroidery. When electrodes and circuits for smart wearable products are produced through the embroidery process using conductive multifilament yarns, unnecessary material loss is minimized, and complex electrode shapes or circuit designs can be produced without additional processes using a computer embroidering machine. However, because ordinary missionary threads cannot overcome the stress in the embroidery process and yarn cutting occurs, herein, we analyzed the S-S curve, thickness, and twist structure, which are three types of silver-coated multifilament yarns, and measured the stress in the thread of the embroidery simultaneously. Thus, the required mechanical properties of the yarns in the embroidery process were analyzed. In the actual sample production, cutting occurred in silver-coated multifilament rather than silver-coated polyamide/polyester, which showed the lowest S-S curve. In the embroidery process, the twist was unwound through repetitive vertical movement. Further, we fabricated a piezoresistive pressure/tension sensor to measure gauge factor, which is an index for measuring biological signals. We confirmed that the sensor can be applied to the fabrication of embroidery electrodes, which is an important process in the mass production of smart wearable products.

• Journal of Conservation Science
• /
• v.37 no.2
• /
• pp.120-134
• /
• 2021

A Woolen carpet from the late Joseon Dynasty was unearthed in the process of repairing Seongjeonggak in Changdeokgung. Since relics are rarer than documentary records, the woolen carpet is highly valued as a relics. It is presumed to have been woven in the late 19th or early 20th century because there is a record of repairing Seongjeonggak in 1907. In the carpet, a pattern is made by inserting colored yarn dyed yellow and red onto a reddish-purple ground weave. The selvage of the woolen carpet used cotton thread, and jute is used for the warp and weft of the ground weave. The colored patterns is made of wool in the form of loop pile. Cut piles may appear occasionally when the colored yarn changes, but are almost invisible from the surface because they are pressed tightly with a shuttered weft. Making carpets with jute and wool is thought to be influenced by the Brussels carpets of the mid-18th century. Furthermore, the woolen carpet is torn and the pattern is completely unclear; however, it is understandable that the pattern is partially repeated. Microscopic and Fourier transform-Infrared spectrometer(FT-IR) analyses were performed for the above investigation. To identify the dyes used in relics, we compared them with natural dyed fabric samples based on chromaticity measurements and Ultraviolet/Visible spectrophotometer(UV-Vis) analysis. These analyses revealed that the woolen carpet's dyed green yarn did not use indigo, and reddish-purple ground weave is estimated to have used Caesalpinia sappan.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.33-39
• /
• 2021

As the interest and demand in the recycled yarn field has increased rapidly worldwide, domestic companies are also promoting research and development and business on recycled yarn. The chemical and thermal properties of four types of virgin and recycled PET samples from A and B company, which are the leading domestic companies in the recycled polyester yarn business, were confirmed through infrared (FT-IR) spectroscopy and differential scanning calorimetry (DSC). Virgin and recycled PET from two companies were compared. FT-IR spectroscopy revealed the typical spectra of PET for both companies and a different peak at 872 cm-1. DSC confirmed that the melting point and crystallization temperature of recycled PET were lower than those of virgin PET. These results indicate that small amounts of contaminants are an important parameter affecting the thermal properties of recycled PET. In the DSC results after seven repeats of the heating and cooling processes, all four samples showed that a lower melting point, crystallization temperature, and low heat flow intensity increased with increasing number of cycles. The results of melting and crystallization enthalpy also showed similar patterns.