• 제목/요약/키워드: YBa2Cu3O7

검색결과 375건 처리시간 0.033초

스퍼터링과 펄스 레이저를 이용하여 $CeO_2$완충층 위에 층착된 $YBa_{2}Cu_{3}O_{7-\delta}$박막의 제작 (Fabrication of Thin $YBa_{2}Cu_{3}O_{7-\delta}$ Films on $CeO_2$Buffered Sapphire Substrate Using Combined Sputter and Pulsed Laser Deposition)

  • 곽민환;강광용;김상현
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2001년도 하계학술대회 논문집
    • /
    • pp.901-904
    • /
    • 2001
  • For the c-axis oriented epitaxial YBa$_2$Cu$_3$O$_{7-{\delta}}$ thin film on r-cut sapphire substrate it is necessary to deposit buffer layers. The CeO$_2$buffer layer was deposited on sapphire substrate using RF magnetron sputtering system. We investigated XRD pattern of CeO$_2$thin films at various sputtering conditions such as sputtering gas ratio, sputtering power, target to substrate distance, sputtering pressure and substrate temperature. The optimum condition was 15 mTorr with deposition pressure, 1:1.2 with $O_2$and Ar ratio and 9cm with target to substrate distance. The CeO$_2$(200) peak was notable for a deposition temperature above 75$0^{\circ}C$. The YBa$_2$Cu$_3$O$_{7-{\delta}}$ was deposited on CeO$_2$buffered r-cut sapphire substrate using pulsed laser ablation. The YBa$_2$Cu$_3$O$_{7-{\delta}}$CeO$_2$(200)/A1$_2$O$_3$thin film was exhibited a critical temperature of 89K.xhibited a critical temperature of 89K.

  • PDF

Fine YBaCuO Powder Prepared by Sol-gel Method

  • Soh, Deawha;Li, Fenghua;Wang, Jue;Fan, Zhanguo
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2002년도 하계학술대회 논문집
    • /
    • pp.470-473
    • /
    • 2002
  • In order to get proper original suspension for the electrophoresis process of making YBaCuO films, YBaCuO superconductor powder was prepared with the Sol-gel method. The composition of the powder was analyzed by X-ray diffraction, which was identified as YBa$_2$Cu$_3$O$\sub$7-x/(Yl23) phase. The form of YBaCuO single particle was showed to be spherical by scanning electronic microscope and its size was among 0.2-1 $\mu\textrm{m}$. The critical transition temperature (T$\sub$c/) and the critical current density (J$\sub$c/) were measured with the four-probe, method. The T$\sub$c/ was about 91 K, and the J$\sub$c/ was 5-30 A/$\textrm{cm}^2$.

  • PDF

Off-Axis RF 마그네트론 스퍼터링에 의한 $YBa_2Cu_3O_{7-x}$ 고온 초전도 박막의 제조 (Fabrication of High-Tc Superconducting $YBa_2Cu_3O_{7-x}$ Thin Films by Off-Axis RF Magnetron Sputtering)

  • 성건용;서정대;강광용;장순호
    • 한국세라믹학회지
    • /
    • 제28권3호
    • /
    • pp.243-251
    • /
    • 1991
  • High-Tc YBa2Cu3O7-x superconducting thin films have been prepared by single-target off-axis RF magnetron sputtering. Optimal ratio of Y : Ba : Cu of the single-target was determined as 1 : 1.65 : 3.35 in order to obtain the stoichiometric films. Tc, crystalline phase, and microstructures of the surface and cross-section of the ex-situ YBa2Cu3O7-x thin films on MgO(100) had a Tc, zero of 80K, and the films on LaAlO3/Si had a Tc, on-set of 90 K and a Tc, zero of 70 K.

  • PDF

차단기 적용을 위한 초전도체의 합성 (Electric Properties of High-Tc Ceramic Superconductor for Breaker)

  • 이상헌
    • 한국전기전자재료학회논문지
    • /
    • 제31권2호
    • /
    • pp.90-93
    • /
    • 2018
  • This aim of this study was to develop a process for creating bulk single-crystal YBaCuO superconductors in a high magnetic field. To support the bulk unidirectional growth of $YBa_2Cu_3O_{7-y}$, $SmBa_2Cu_3O_{7-y}$ seeds were planted inside YBaCuO composites and samples were produced by melting, enabling the growth of two YBaCuO superconductors. Due to the magnetism generated inside the superconductor of the upper sample, the magnetization inside the superconducting single crystals was evenly distributed, the sharpness of the induced magnetic force was improved, and the superconducting magnetization were significantly improved. This approach is widely applicable for the production of superconducting wires and current leads used for DC power breakers.

펄스레이저 증착법으로 제작된 $Bi_4Ti_3O_{12}/LaAlO_3$ 박막과 $Bi_4Ti_3O_{12}/YBa_2Cu_3O_{7-x}/LaAlO_3$ 복합구조의 에피 성장 (Epitaxial Growth of Pulsed-Laser Deposited Bi4Ti3O12/LaAlO3 Thin Films and Bi4Ti3O12/YBa2Cu3O7-x/LaAlO3 Heterostructure)

  • 조월렴;조학주;노태원
    • 한국결정학회지
    • /
    • 제5권2호
    • /
    • pp.85-92
    • /
    • 1994
  • 펄스 레이저 증착법을 이용하여 강유전체 Bi4T13012 박막을 laA109(001) 위에 성장시켰다. 넓은 영역의 온도에서 증착한 박막의 상 형성과 구조적 성질을 X선 회절법을 이용하여 조사하였다. 740℃에서 증착한 박막은 박막의 c-축이 기판에 수직한 형태의 에피 성장의 경향을 보인다. 펄스 레이저 증착법을 이용하여 Bi4Ti3O12/YBa2Cu3O7-x/LaAlO3 복합구조를 in-situ 성장시켰다. Yba2Cu3O7-x의 a-, b-축이 LaAlO3와 완벽하게 평행하게 배열되어 있지 않음에도 불구하고, Bi4Ti3012 박막은 에피 성장의 경향을 보인다.

  • PDF

Degradation Reaction of the 90K Superconductor $YBa_2Cu_3O_{7-\delta}\;in\;H_2O$

  • Choy, Jin-Ho;Chun, Sung-Ho;Kim, Bae-Whan;Jung, Duk-Young;Hong, Seung-Tae;Byeon, Song-Ho
    • Bulletin of the Korean Chemical Society
    • /
    • 제9권4호
    • /
    • pp.240-243
    • /
    • 1988
  • Degradation of the 90 K superconductor $YBa_2Cu_3O_{7-{\delta}}$ in water and humid atmosphere were studied and its decomposition products were identified as $BaCO_3$, CuO, $Y_2(CO_3)_3{\cdot}3H_2O$ and $O_2$. XRD analysis, iodometric titration and IR-spectroscopy of the degraded samples suggest that the $YBa_2Cu_3O_{7-{\delta}}$ decomposes in three steps such as the reduction of $Cu^{3+}$ to $Cu^{2+}$, followed by the hydroxylation of $Ba^{2+}$ and $Y^{3+}$ via hydration and finally the formation of carbonates through the uptake of ambient $CO_2$.

Preparation of Submicron YBaCuO Powder by Sol-gel Method

  • Fan, Zhanguo;Soh, Dea-Wha
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
    • /
    • pp.557-560
    • /
    • 2003
  • The submicron $YBa_2Cu_3O_x$ powder was prepared by the sol-gel method. The particle size is distributed from 0.2 to $1.0\;{\mu}m$, which benefits to eliminate the micro-cracks formed in the $YBa_2Cu_3O_x$ films deposited by electrophoresis. The powder was single phase of $YBa_2Cu_3O_x$ examined by X-ray diffraction. In the sol-gel process the citrate gel was formed from citric acid and nitrate solution of $Y_2O_3$, $Ba(NO_3)O_2$ and CuO. When pH values were adjusted to $6.4{\sim}6.7,\;Ba(NO_3)O_2$ could be dissolved in the citrate solution completely. Appropriate evaporative temperature of the sol-gel formation is discussed. After the heat treatment the transition temperature($T_c$) and critical current density($J_c$) of the $YBa_2Cu_3O_x$ samples made of the submicron powder were measured.

  • PDF

Electronic Structures and Properties of the Charged Model Clusters Relating to High-$T_c$ Superconductor $Y{Ba_2}{Cu_3}{O_{7-x}}$

  • Paek, U-Hyon;Lee, Kee-Hag;Sung, Yong-Kiel;Lee, Wang-Ro
    • Bulletin of the Korean Chemical Society
    • /
    • 제12권6호
    • /
    • pp.606-612
    • /
    • 1991
  • We have carried out an extended Huckel calculation to rationalize the role of $CuO_3$ chains and the size effect of the charged model clusters for the following charged model culsters : ${{Cu_6}{O_{21}}^{28-},\;{{Cu_6}{O_{22}}^{30-}\;,{{Cu_9}{O_{30}}^{39-}\;,{{Cu_9}{O_{32}}^{43-}\;,{{Cu_{12}{O_{38}}^{48-}\;,{{Cu_{15}{O_{50}}^{65-}\;,{{Cu_{18}{O_{54}}^{66-}\;,{{Cu_{18}{O_{55}}^{68-}\;,{{Cu_{24}{O_{70}}^{84-}\;and\;{{Cu_{27}{O_{78}}^{93-}$ for high-$T_c$ superconductor $YBa_2Cu_3O_7$: ${{Cu_6}{O_{18}}^{22-}\;,{{Cu_9}{O_{26}}^{31-}}\;,{{Cu_{12}{O_{32}}^{36-}\;,{{Cu_{15}{O_{42}}^{49-}\;,{{Cu_{18}{O_{46}}^{50-}\;,{{Cu_{24}{O_{60}}^{64-}\;and\;{{Cu_{27}{O_{66}}^{69-}$ for insulator $YBa_2Cu_3O_6$. The results show that the electronic structures and properties of the charged model clusters relating to high-$T_c$ superconductor are very sensitive to the size change of the clusters with various environmental effects, wherease those of the charged model clusters for insulator $YBa_2Cu_3O_6$ are monotonous to the size change. The $CuO_3$ chains along the b-direction may yield cooperative electronic coupling with the $CuO_2$ layers in determining both conducting and superconducting properties of $YBa_2Cu_3O_{7-x}$ system.

2-Ethylhexanoate 화합물에서 제조한 고온초전도체 $LnBa_2Cu_3O_{7-\delta}$ (High $T_c$ Superconductors $LnBa_2Cu_3O_{7-\delta}$ from 2-Ethylhexanoate Precursors)

  • 권정옥;홍순복;이성욱;오정식;정원양
    • 대한화학회지
    • /
    • 제36권6호
    • /
    • pp.818-823
    • /
    • 1992
  • Y, Er, Yb, Ba 및 Cu를 각각 포함하는 유기금속 화합물인 2-Ethylhexanoate 화합물을 합성하였다. 합성된 유기금속화합물들은 모두 공통용매에 녹아 균일혼합물을 형성하였으며 이들을 원료물질로 하여 고온초전도체 $YBa_2Cu_3O_{7-\delta}(Y_{123})$, $ErBa_2Cu_3O_{7-\delta}(Er_{123})$$YbBa_2Cu_3O_{7-\delta}(Yb_{123})$를 제조하였다. X-선 회절분석결과 이들은 단일상이 아니었으며 $YBa_2Cu_4O_8(Y_{124})$를 포함한 약간씩의 불순물상을 포함하고 있었고, 이것은 자화율 측정에서도 확인되었다. Ceramic method로 제조한 시료에 비하여 임계온도가 대체로 높았으며, 부피반자성자화율은 큰 변화가 없는 것으로 판단된다.

  • PDF