• 한국전기전자재료학회논문지
• /
• 제19권4호
• /
• pp.391-397
• /
• 2006

We present investigations of a hybrid type superconducting fault current limiter (SFCL), which consists of transformers and resistive superconducting elements. The secondary windings of the transformer were separated into several electrically isolated circuits and linked inductively with each other by mutual flux, each of which has a superconducting current limiting element of $YBa_2Cu_3O_7$ (YBCO) stripes as a current limiting element. Simple connection in series of the SFCL elements tends to produce ill-timed quenching because of power dissipation unbalance between SFCL elements. Both electrical isolation and mutual flux linkage of the elements provides a solution to power dissipation unbalance, inducing simultaneous quench and current redistribution of the YBCO films. This design enables to increase the voltage rating of SFCL with given YBCO stripes.

• 한국세라믹학회지
• /
• 제33권6호
• /
• pp.718-724
• /
• 1996

Deformation mechanism map of Langdon-Mohammed type for YBa2Cu3O7-x superconducting ceramic was constructed by considering mechanisms of Nabarro-Herring Coble and powder-law creep and grain boundary sliding (GBS) with an accommodation by grain boundary diffusion. The map was found consistent with experi-mental results not only of the creep the also of the superplastic deformation. It showed the transition from interface reaction-controlled to the grain boundary diffusion-controlled GBS mechanism at about 1 ${\mu}{\textrm}{m}$ grain size and 100 MPa flow stress in agreement with the experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.1137-1139
• /
• 1993

The superconducting thin films of $YBa_2Cu_3O_{7-x}$ were deposited on (100) sapphire substrates at low temperature by rf magnetron sputtering and annealed at $895^{\circ}C$ for 60 sec. using rapid-thermal-annealing(RTA) technique. The films were characterized by SEM, four-point probe resistivity measurement, XRD, and AES. The RTA processed HTS films had a preferential structure with c-axis normal to the substrate surface.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.349-352
• /
• 2004

The improvement of critical temperature $(T_c)$, critical magnetic field $(H_c)$, and critical current density $(J_c)$ of superconductor is important for practical applications. In this study, the additives such as metal oxides were used to improve the preparation conditions of $YBa_2Cu_3O_x$ superconducting bulk samples and depending on additives the properties of $YBa_2Cu_3O_x$ superconductor were studied. The effects of additives to the density, grain alignment, and porosity of samples that affect the critical current density of superconductor also have been investigated.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1996년도 재료학회 춘계학술발표회
• /
• pp.153-153
• /
• 1996

• Progress in Superconductivity
• /
• 제1권2호
• /
• pp.89-94
• /
• 2000

A YBCO superconductor was prepared in a short time by a melt infiltration process that utilizes meting of $Ba_3Cu5O_8$ powder and the infiltration into a porous $Y_2BaCuO_5$ compact. The processing parameters such as a reaction temperature and time, and atmosphere (air and $O_2$) were controlled to establish the fabrication condition. The formation of a $YBa_2Cu_3O_x$, phase and the developed microstructure are reported.

• 한국결정학회지
• /
• 제14권2호
• /
• pp.51-55
• /
• 2003

YBa₂CU₃O/sub 7-8/(YBCO) coated conductor의 완충층 구조를 개선하기 위하여 2축배향된 Ni-3 wt%W 합금 기판위에 단일 완충층으로 SrTiO₃(STO) 박막을 증착하였다. YBCO와 STO 박막은 펄스레이저 증착법으로 성장시켰다. STO 박막의 표면은 증착온도에 따라 다른 미세조직을 보여 주었고, XRD 분석에서는 STO와 YBCO 박막이 금속기판의 배향성을 가지면서 성장되었음을 알 수 있었다. 액체질소 온도에서 1.2 MA/㎠의 임계전류밀도와 86 K의 임계온도를 가지는 짧은 길이의 coated conductor를 STO 단일완충층을 이용하여 제조하였다.

• 한국진공학회지
• /
• 제3권1호
• /
• pp.117-121
• /
• 1994

SrTiO3(100) 단결정을 3keV 아르곤이온으로 에칭하면 표면원소의 산화 상태가 환원되고 표면의 거칠기가 증가하는 것이 XPS와 SEM으로 측정되었다. 그러나 3keV의 산소이온으로 에칭하면 표면원소 의 화학적 상태도 변하지 않고 표면도 평탄한 상태로 계속 유지된다. 산소 이온에 의하여 에칭된 SrTiO3 기판상에 off-axis rf 스퍼트링 방법으로 성장된 YBa2Cu3Ox 박막이 아르곤 이온에 의하여 에칭 된 SrTiO3 기판상에 성장된 YBa2Cu3Ox 박막보다 높은 Tc,zero and Jc를 보여주었다. 이논문은 YBCO초전 도 박막의 성장과 전자공학적 활용을 위한 리토그라피 공정에서 이온밀링 공정의 조건은 매우 주의하여 선택되어야 함을 보여준다.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2002년도 High Temperature Superconductivity Vol.XII
• /
• pp.70-70
• /
• 2002

• Progress in Superconductivity
• /
• 제10권1호
• /
• pp.12-16
• /
• 2008

In this work, nano size $BaCeO_3$, which is a possible flux pinning medium of melt processed $YBa_{2}Cu_{3}O_x$ superconductor, was synthesized by the conventional solid state reaction method using powders. $BaCeO_3$ and $CeO_2$ were mixed thoroughly using a ball milling for 24 hours and calcined at $1200^{\circ}C$ for 5 hours for the formation $BaCeO_3$ powder. The obtained $BaCeO_3$ powder was attrition milled at various milling times of 60 min, 120 min and 240 min. The $BaCeO_3$ powders of various milling times were mixed with $YBa_{2}Cu_{3}O_x$ powder. Seed melt processed $YBa_{2}Cu_{3}O_x$-$BaCeO_3$ (15wt.%) superconductors were prepared and the superconducting properties were investigated. It was found that $T_c$ of $Y_{1.5}Ba_{2}Cu_{3}O_x$ samples was not significantly affected by $BaCeO_3$ addition, but $J_c$ of samples was increased by $BaCeO_3$ addition. The $J_c$ improvement by fine $BaCeO_3$ powder (120 min attrition-milled) was effective at low magnetic fields less than 2 T.