• 한국초전도학회:학술대회논문집
• /
• v.14
• /
• pp.94-94
• /
• 2004

• 한국초전도학회:학술대회논문집
• /
• v.11
• /
• pp.69-69
• /
• 2001

• 한국초전도학회:학술대회논문집
• /
• 2008.08a
• /
• pp.71-71
• /
• 2008

• 한국초전도학회:학술대회논문집
• /
• v.15
• /
• pp.88-88
• /
• 2005

• Journal of Magnetics
• /
• v.16 no.2
• /
• pp.186-191
• /
• 2011

[ $YBa_2C_3O_{7-x}$ ]films were fabricated on a $SrTiO_3$ (100) substrate using a trimethylaceate propionic acid (TMAP)-based MOD process by controlling the precursor solution viscosity, firing temperature, and by using various coatings. The viscosity of the precursor solution was controlled by the addition of Xylenes. The films were heat treated with different temperatures from 750 to $800^{\circ}C$. c-axis oriented films were obtained. After adding 9 ml of Xylene into the precursor solution, the $T_c$ of the YBCO film, which was coated 2 times and heat treated at $800^{\circ}C$, was 86 K and the measured $J_c$ was above 2.5 MA/$cm^2$ at 77 K in a zero-field.

• Progress in Superconductivity
• /
• v.6 no.1
• /
• pp.32-36
• /
• 2004

To investigate the influence of strip width and inter-strip separation on the ac loss, arrays of parallel strips with different widths and separations were prepared. Studies on the hysteresis-loss characteristics of multifilamentary YBCO films were performed. The local magnetic field due to magnetization currents is measured by a scanning Hall probe microscope. Based on these results a conceptual design for a low loss YBCO coated conductor is suggested.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.816-817
• /
• 2008

본 논문에서는 2세대 고온초전도 선재인 YBCO CC(Coated Conductor)를 사용하여 접합 없이 권선되는 새로운 형태의 고온초전도 팬케이크형 코일에 영구전류를 인가하기 위한 영구전류 스위치의 형태를 제안였다. 제안된 테이프 형태의 광폭 YBCO CC의 양끝부분을 제외한 중간부분을 2분할하여 감아 뒤집은 형태의 팬케이크 코일에는 접합부분이 없으므로 영구전류가 흐를 수 있으나, 전류의 인가를 위한 스위치를 별도로 제작하여 연결하기 곤란하다는 단점이 있다. 본 연구에서는 감아 뒤집은 고온초전도 팬케이크 코일의 한쪽 단부를 영구전류 스위치로 사용할 수 있는 구조를 제안하였고, 추후 연구에 실제로 사용될 12 mm 폭의 YBCO CC를 사용하여 영구전류 스위치를 제작하고 특성시험을 수행하였다.

• Progress in Superconductivity
• /
• v.10 no.2
• /
• pp.149-154
• /
• 2009

We measured and analyzed the quench development in coated conductor(CC) tapes. The CC was grown on hastelloy substrates and has an Ag protection layer. The tapes were subjected to simulated AC fault currents for quench development measurement. They were immersed in liquid nitrogen during the experiment. The quench resistance increased rapidly first, and the increase slowed down afterwards. It increased linearly with applied voltage at lower voltages, and depended less strongly on applied voltage at higher voltages. The resistance was compared with that of Au/YBCO films grown on sapphire substrates, and found to increase more monotonously than the latter. Data were analyzed quantitatively with the concept of heat transfer within the tape and the surrounding liquid nitrogen. A heat balance equation was derived and solved, taking into consideration temperature dependence of thermal parameters of the tapes. Solutions, together with values of thermal parameters taken from the literature, explained the data well. Cooling by liquid nitrogen affected the quench development considerably at lower applied voltages. Dependence on applied voltages could be also understood quantitatively.

• 한국초전도학회:학술대회논문집
• /
• 2009.07a
• /
• pp.87-87
• /
• 2009

• 한국초전도학회:학술대회논문집
• /
• v.15
• /
• pp.70-70
• /
• 2005