• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.109-109
• /
• 2013

고주파 가속기의 전자선원의 설계 및 제작검증을 위한 hot-firing station을 설계하였다. 본 장치는 전자총의 빔 사이즈, 빔 전류 등을 측정할 수 있는 기기로 전원장치부, 고진공 챔버, 측정장치부 등 크게 세 부분으로 이루어져 있다. 특히 전원장치는 이중에너지 모드를 구현할 수 있도록 에너지의 크기가 다른 두개의 전자총 펄스를 생산해 낼 수 있도록 설계되었다. 고진공 챔버는 고전압 절연체를 이용하여 제작되었으며, 스크롤(건식) 펌프 와 터보 분자펌프를 이용하여 $10^{-7}$ torr 저/고진공 배기를 수행한 뒤, 이온 펌프를 이용하여 $10^{-8}$ torr까지 초고진공 배기를 수행할 수 있도록 설계하였다. 전자총으로 부터 나오는 전자들의 특성을 분석하기 위하여 패러데이 컵과 YAG 스크린을 설치하였다. 패러데이 컵은 전자빔의 인출 파형및 빔 전류를 측정하고, YAG 스크린은 CCD 카메라와 컴퓨터를 이용하여 전자빔의 균일도를 측정하여 정보를 얻도록 한다. 진공 쳄버의 최대 진공배기는 $10^{-9}$ torr이다.

• Journal of Welding and Joining
• /
• v.25 no.4
• /
• pp.72-78
• /
• 2007

Aluminized steel sheet is a material with excellent heat resistance, thermal reflection and corrosion resistance. It has wide applications, owing to its low cost and excellent performance, in the petrochemical industry, electric power and other energy conversion systems, etc and has attracted the attention of many investigators. But the welding of aluminized steel sheet has a problem of decreasing tensile-shear strength, caused by mixed Al in the weld. This study investigated behavior of Al and its structural properties to resolve this problem. Several analysis equipment(SEM, EDX, EPMA) were used to investigate Al element in the weld. Also microhardness tester and TEM equipment were used to find the intermetallic compound. As a result of this study, Al-rich zones existed in the weld and Fe-Al intermetallic compounds were found in these zones. At the same time, the weldability of aluminized stainless steel sheet was investigated and compared with that of aluminized steel sheet. Although there is a difference between the base metal of the low carbon steel and stainless steel, it is interpreted that a behavior of Al element in the weld is similar.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.1
• /
• pp.56-61
• /
• 1997

Lead zirconate titanate (PZT) thin fills were deposited onto the Pt/Ti/SiO2/Si substrate by the pulsed laser deposition with the second harmonic wavelength (532 nm) of Nd:YAG laser. In order to determine the optimum conditions for the film deposition, the phase of the films were investigated as functions of ambient oxygen pressure, substrate temperature, and laser fluence. Also the chemical composition analysis was conducted for the PZT films deposited under various ambient oxygen pressure. When the distance between substrate and bulk PZT target is set to 20 mm, the optimum conditions have been determined to be 3 torr of oxygen pressure, 1.5 J/cm2 of laser fluence, and 823-848(±10) K range of substrate temperature. At these conditions, perovskite phase PZT films were obtained on platinized silicon. The chemical composition of the films is very similar to that of PZT bulk target. The physical structure of the deposited films analyzed by scanning electron microscopy shows a columnar morphology perpendicular to the substrate surface. Capacitance-Voltage hysteresis loop measurements show also a typical characteristics of ferroelectric thin film. The dielectric constant is found to be 528 for the 0.48 μm thickness of PZT thin film.

• Korean Journal of Metals and Materials
• /
• v.50 no.5
• /
• pp.353-360
• /
• 2012

The corrosion product of archaeological iron objects is supposed to be removed because it causes re-corrosion. So far it is removed by scapel and sand blaster but they depend on the skill and experience of a conservator and the glass-dust of the sand blaster is harmful to humans. Therefore this study applies a laser cleaning system which is used in various industrial cleaning processes, to remove corrosion product from archaeological iron objects. In addition, this work studies the alternation of corrosion product after laser irradiation, which evaluates the reliability of the laser cleaning system. Optical microscopy, SEM-EDS, XRD, Raman have been used to observe and analyse the surface of the objects. The results show the capacity of laser cleaning some corrosion product, but blackening appears with increasing pulses and laser energy, and some corrosion products, goethite and hematite, are partially altered to magnetite. These problems, blackening and alternation of corrosion product, should be solved by further studies which find the optimal laser irradiation condition and use a wetting agent.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.175-178
• /
• 2008

Spray characteristics for the simplex atomizer are investigated. The atomizer was tested with kerosene which is generally used as a fuel for gas turbine engines. But it is very difficult and dangerous to measure spray performance. So water is used as a working fluid for measuring the droplet information. In this study, spray visualization was performed by using ND-Yag Laser and droplet size was measured by using PDPA system by using two different working fluid such as water and test fluid # 2 which has similar characteristics of the kerosene. The test results show that SMD of water bigger than test fluid # 2 about 5$\sim$15 mm because surface tension of water is higher by a factor of 3. But the spray angles and the spray shapes have similarity

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.429-434
• /
• 2012

Ignition delay of micro/nano aluminum particles is caused by aluminum oxide shell. The method of minimizing this ignition delay is proposed in the study. Generating and heating of particles are processed at the same time. As soon as heated particles are produced, they immediately contact with oxygen. Chemical reaction is induced on the contact surface instead of crystallization of oxide shell. Finally particles are ignited. Aluminum particles are generated by laser ablation on an aluminum plate using Nd:YAG pulse laser. Injected particles are confirmed through visualization of particles using scattering method. $CO_2$ continuous laser supplies heat to aluminum plate and generated particles. Trace of burning particles is observed in the experiment.

• Korean Journal of Optics and Photonics
• /
• v.3 no.1
• /
• pp.50-54
• /
• 1992

Maskless depositon of copper onto n-doped and p-doped Si in an aqueous copper sulfate solution is investigated. On p-doped Si substrates, microscopic $(~10\mu\textrm{m}$) copper spots are deposited by illuminating continuous wave $Ar^+$ laser beam of wavelength 514.5 nm. Copper deposition on n-doped Si substrates is also achieved by shinning second harmonic pulses $(pulse width~25 nsec, \lambda=530 nm)$ of a passively Q-switched Nd:YAG laser. The observed deposition is attributed to the electric field resulting from the Galvanic potential of a semiconductor-electrolyte junction.

• Korean Journal of Optics and Photonics
• /
• v.13 no.5
• /
• pp.414-420
• /
• 2002

We realized optical logic gates using a bacteriorhodopsin (bR) doped polymer film. The bR undergoes a complex photocycle characterized by several spectroscopically distinct intermediate states. We realized optical logic gates using a He-Ne laser (632.8 nm) and a He-Cd laser (413 nm) that consider B-state and absorption change of M-state in the photocycle of bR. Also, we realized high speed AND logic gate using He-Ne laser (632.8 nm) and the second harmonics at 532 nm from a pulsed Nd-YAG laser that considering absorption spectrum between B-state and K-state.

• Journal of Periodontal and Implant Science
• /
• v.26 no.4
• /
• pp.989-1002
• /
• 1996

The purpose of this study was to determine the effect of a pulsed Nd:YAG laser irradiation on human gingival tissues. The patients, who were planned to be treated by clinical crown lengthening procedure and gingivectomy, were selected. All the patients received oral hygiene instruction, scaling and root planing at preoperation. The crest of gingival tissue on upper and lower anterior teeth was irradiated by a pulsed Nd:YAG laser(El. EN. EN060, Italy) with a fiber optic of 300 m in contact mode for 20 seconds. Gingival tissues were divided into 4 groups according to the laser power of 1.0W(10Hz, 100mJ), 2.0W(20Hz, 100mJ), 3.0W(30Hz, 100mJ) and 4.0W(40Hz, 100mJ). Immediately after the laser irradiation, the specimens were excised, fixed 10% neutral formalin, sectioned $4-6{\mu}m$ thick, stained by Hematoxylin-Eosin and Periodic Acid Schiff stain and observed under light microscope. The removed tissue depth and the coagulated layer depth due to a laser irradiation by a laser irradiation were measured on the microphotographs. The difference of measurements according to the different laser power was statistical1y analyzed by Kruskal Wallis Test with SAS program. The results were as follows : 1. In histologic findings of irradiated gingival tissues; a. In the irradiated gingival specimen with 1.0W laser power, some vesicles were observed in limited superficial layer of gingival epithelium. b. In the irradiated gingival specimen with 2.0W and 3.0W laser power, the epithelium was almost removed except for the traces of viable basal cell remnants at ret peg, and coagulation necrosis related with the thermal effect of laser was noted. c. In the irradiated gingival specimen with 4.0W laser power, complete removal of epithelium, partial removal of underlying connective tissue, and the coagulation necrosis of subjacent gingival tissue were shown. 2. The removed tissue depth was deeper in the irradiated specimens with higher power. There was a statistical significance in the difference of removed tissue depth between 1.0W group ($44.54{\pm}6.99um$) and 3.0W group ($99.75{\pm}6.64{\mu}m$), and between 1.0W group($44.54{\pm}6.99{\mu}m$) and 4.0W group($111.36{\pm}4.50{\mu}m$), and between 2.0W group($98.01{\pm}4.53{\mu}m$) and 4.0W group($111.36{\pm}4.50{\mu}m$)(P<0.05). 3. The coagulated layer depth was deeper in the irradiated specimens with higher power. There was a statistical significance in the difference of coagulated layer depth between 1.0W group($31.82{\pm}8.99{\mu}m$) and 3.0W group($55.99{\pm}20.94{\mu}m$), and between 1.0W group($31.82{\pm}8.99{\mu}m$) and 4.0W group($83.68{\pm}10.34{\mu}m$)(P<0.05). From this study, the results demonstrated that the effects of a pulsed Nd:YAG laser irradiation on gingival tissues seemed to depend on the laser power and that the irradiation with high power could be harmful to adjacent healthy tissue.

• Journal of Oral Medicine and Pain
• /
• v.23 no.1
• /
• pp.11-20
• /
• 1998

저자는 치과용 레이저를 이용한 상아질지각과민증 치료효과를 임상적으로 평가하고자 상아질지각과민증환자 24명을 대상으로 각 환자마다 상아질 지각과민 치아 중 레이저로 치료 할 치아1개(실험군)와 치료하지 않을 치아 1개(대조군)를 선정하여, 치과용 air-syringe에 의한 냉자극과 치과용 탐침자에 의한 기계적 자극을 가한 후 Visual Analogue Scale(VAS)을 통해 지각과민증 정도를 평가하였으며, 이후 실험군 치아의 치경부 마모면에 광섬유 레이저에너지 전달방식의 펄스형 Nd:YAG 레이저의 일종인 Sunlase Master(Sunrise Technologies Inc., U.S.A., 파장 1064nm, 펄스지속시간 120(sec, 광섬유직경 320(m)를 사용하여, 0.3-1.0W, 10Hz 조건으로 환자의 반응에 따라 1회2분을 초과하지 않는 범위 내에서 비접촉식과 접촉식을 병행하여 3회에 걸쳐(초진 당일, 1일후, 3일후) 레이저를 조사한 후 처음조사 직후, 그리고 초진 1일후, 3일후, 7일후, 14일후 VAS를 채득하여 조사전과 비교, 분석, 평가하였던 바, 상아질 지각과민증이 각각 약 50%, 약36%, 약45%, 약 53% 감소하였으나 (p(0.05) 경시적으로는 유의한 차이를 보이지 않았다. 그리고 24명중 9명에 대해서는 초진 30일 후 까지 레이저조사치료효과를 평가하였던 바, 상아질지각과민증이 처음조사 직후, 감소하였으며 (p(0.05)역시 경시적으로는 유의한 차이를 보이지 않았다. 초진 30일 후 상아질지각과민증이 초진 14일 후에 비해 약간 증가되는 경향을 보여, 레이저조사 치료효과가 약화되는 경향인지 여부에 대해 향후 추가적인 연구가 필요할 것으로 사료된다.안되었다.기란 현실적으로 불가능하므로, 본 연구에서는 이러한 제약점을 극복할 수 있는 근사적인 지체시간을 계산하는 방법을 제시한 점에서 의미를 갖을 수 있다.수들은 직업의 선택이나 소득을 예측하기 위한 요소들로 포함될 수 없었다. 따라서 후속연구에서는 이를 보완해야 할 것이며, 최근 들어 우리 나라에서도 재택근무에 대한 관심이 대두되고 있으나 아직 개념정의나 그 중요성과 가치, 그리고 실태 파악과 같은 연구가 활발히 이루어지지 못하고 있으므로 이에 대한 심층적인 연구가 행해져야 할 것이다.d similar flower proceeding dates in all branches. but "Daepung" showed similar flower proceeding dates in all branches.est in HB. Mean period of wetting duration was in the order of DS＞HB＞MB, while the dew point depression was greatest in DS.ANCOVA, Pearson correlation을 이용하여 분석하였으며, 그 결과는 다음과 같다. 캠프 프로그램은 소아 당뇨병 환자의 자기 효능을 증진시키고 환자 역할 행위 이행을 높여주는데 효과적 이었다. 소아 당뇨병 환자의 자기 효능은 환자 역할 행위 이행과 순 상관 관계가 있어, 자기 효능이 증진될수록 환자 역할 행위 이행 정도가 높아졌다. 무조건 사주지 않는다(8.0%), 무조건 사준다(3.1%)로 식품광고에 나오는 식품 요구시 부모의 70.3%가 거절하는 것으로 나타났다. 거절 이유는 건강에 나쁘다는 것이 가장 큰 이유였으며 강남과 강북 어린이간에 유의적인 차이가 있었다(p＜0.001).