• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.230-231
• /
• 2003

$KNbO_3$is one of the best materials for efficient nonlinear frequency conversion, due to its large nonlinear optical coefficient ($d_{33}$ ＝ 20.6 pm／V), wide transparency range (0.4 ~ 5 $\mu$m) and freedom from photorefractive effects. Quasi-phase-matched second harmonic generation using periodically poled $KNbO_3$ (PPKN) crystals has been reported. Here we report on fabrication of PPKN and demonstration of a pulsed optical param etric oscillator (QPM OPO) pumped by an Nd：YAG laser. (omitted)

• Korean Journal of Optics and Photonics
• /
• v.4 no.4
• /
• pp.428-433
• /
• 1993

The second harmonic of Q-switched Nd:YAG laser beam with gaussian mode is cut off by pinhole of a certain radius and its central portion passed through pinhole is focused by converging lens. It is confirmed that the shape of this beam in focal region is central symmetric but non-gaussian. Change of transmittance due to self-focusing is investigated by scanning (z-scan) $CS_2$ of 1 mm thickness in the focal region. It is found that the observed results can be consistently explained by Fresnel theory within 1.5% accuracy and efficiency of self-focusing depends on spatial shape of incident beam.

• Corrosion Science and Technology
• /
• v.10 no.4
• /
• pp.151-155
• /
• 2011

The iron oxide particles could be resulted from the corrosion of the circulating water system of a power plant. Because it may be one of the trouble materials which affect the power generation efficiency due to the deposition on steam generator tube and turbine blade, the continuous observation of its concentration is very important. The laser induced break-down detection (LIBD) technology was applied to monitor continuously the concentration of corrosion products with the detection limit of ppb level. The measurement system consists of a Nd:YAG pulsed laser, a polarizing beam splitter, a flow-type sample cell, an acoustic emission sensor, a high speed data acquisition board, a personal computer, etc.. The performance test results confirmed that this technology can be effective to monitor the corrosion product concentration of the circulating water system of a power plant.

• Journal of Welding and Joining
• /
• v.15 no.5
• /
• pp.25-35
• /
• 1997

현재, 표면개질에 주로 많이 사용되는 레이저는 세 종류로서, C $O_{2}$$laser(파장길이:10.6.\mum),$ Nd:YAG(neodymium-doped yettrium aluminum garnet) $laser(파장길이:1.06.\mum)$ 및 excimer laser(157~350nm) 등이다. 이 외에도 초기에는 ruby레이저빔이 사용되기도 하였으나, 현재는 많이 사용되고 있지 않다. 레이저 빔에 의한 표면개질에는 몇가지 장점이 있는데, 이러한 장점은 주로 급속가열과 급속냉각 효과에 기인하는 것이다. 즉, 1) 급냉효과에 의한 미세한 결정입자 형성, 2) 불안정상 (metastable phase) 또는 비정질 상 생성, 3) 열역학적 용해도 보다 높은 용해도. 4) 편석이 없는 균질한 미세조직, 5) 극히 낮은 기공도, 6) 좁은 열영향 부위, 7) 표면층과 모재 사이의 높은 결합력 등이다. 이 외에도 공정상의 장.단점들이 Ref.5, 6에 잘 요약 정리되어 있다. 지금까지 국내에서 레이저 표면개질에 대한 조사가 몇몇 있었으나, 본 조사에서는 보통 많이 다루어지지 않은 부분, 즉 충격경화 및 표면제어에 비중을 두었으며, 비용융 부분(I)과 용융부분(II)을 분리하여 정리하였다.

• Proceedings of the KWS Conference
• /
• 2005.06a
• /
• pp.103-105
• /
• 2005

Laser welding technology for automobile body is studied. laser system, robot and seam tracking system are used for 3D laser welding system The laser system is used 4kW Nd:YAG laser(HL4006D) of Trumpf and the robot system is used IRB6400R of ABB. The seam tracking system is SMRT-20LS of ServoRobot. The welding joints of steel plate are butt and lap joint. The 3-D welding for non-linear tailored blank is performed after experiments of bead on plate. Finally, the welding process for non-linear tailored blank is developed.

• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1636-1638
• /
• 1994

Salt deposited on the surface of insulators used in electric power system causes flash-over accidents. Therefore, the quantity of salt on insulators should be monitored not to exceed a critical value. We propose a new remote sensing technique to measure the quantity of salt on insulators of power systems. A pulsed laser beam is focussed on ah insulator to dissociate the salt to sodium atoms. The amount of the salt is measured from the intensity of the spontaneous mission from the sodium atoms. In this paper, a compact salt meter composed of pulsed Nd:YAG laser and omission signal detection system will be introduced. And measurement condition such as the sensitivity, detection range, required laser fluence will be investigated.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.6
• /
• pp.23-29
• /
• 2004

This work was conducted to figure out the atomization characteristics of three types of bio-diesel fuels using a common-rail injection system. The process of spray development was visualized by using a spray visualization system composed of a Nd:YAG laser and an ICCD camera, The spray tip penetrations were analyzed based on the frozen images from the spray visualization system. On the other hand, the microscopic atomization characteristics such as the distributions of SMD and axial mean velocity were measured by using a phase Doppler particle analyzer system, It is revealed that the sprays of the bio-diesel fuels have larger SMD than that of diesel fuel mainly due to high viscosity of bio-diesel. Different characteristics of bio-diesel fuels were also measured in spray tip penetrations according to the fuels and mixing ration.

• Journal of Integrative Natural Science
• /
• v.1 no.1
• /
• pp.32-35
• /
• 2008

We fabricated surface pattern on a light guide panel (LGP) using $CO_2$ laser to improve the luminescence performance of inner-scatterer LGP, which is made of PMMA sample with exploiting Q-switched $2^{nd}$ harmonic Nd:YAG laser engraving system, and the effect of surface pattern in the brightness distribution of LGP was analysed. To prove the feasibility of proposed method in the enhancement of LGP performance, we designed three different surface patterns on the inner-scatterer LGP. The experimental results has proved the potential in the application of surface pattern to increasing the brightness of inner-scatterer LGP.

• Journal of the Korean Ceramic Society
• /
• v.28 no.12
• /
• pp.1005-1011
• /
• 1991

Y-Ba-Cu-O thin films were in-situ fabricated on LaAlO3(100) substrates using the second harmonics of a pulsed Nd:YAG laser. Thin films were deposited under 200 (mtorr) of oxygen atmosphere, when the substrate temperature was changed between 67$0^{\circ}C$ and 82$0^{\circ}C$. After deposition, the films were in-situ annealed at 50$0^{\circ}C$ under 2/3 bar of oxygen pressure. We showed that the deposition temperature affects the formation of superconducting phase, the resistance, and the surface morphology. The Y-Ba-Cu-O thin films deposited at 76$0^{\circ}C$ show the zero resistance critical temperature of 85 K.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.243-245
• /
• 2009

The single phase $Ba_2SiS_4$ doped with $Eu^{2+}$ was successfully synthesized by direct sulfurization of an oxide precursor prepared by a spray drying method using a novel water soluble silicon compound, which remains soluble in a given aqueous solution. The intensity of the emission peak of thus obtained $Ba_2SiS_4:Eu^{2+}$ was 1.75 times larger than that of a sample prepared by a solid state reaction method, and it approached 106% compared to one of the best commercially available YAG:$Ce^{3+}$ phosphor.