• Journal of the Korean Wood Science and Technology
• /
• v.23 no.4
• /
• pp.46-53
• /
• 1995

The anatomy of Korean diffuse-porous woods, 36 families, 75 genera, 145 species, 215 specimens was described and analyzed. Sixteen wood anatomical characters, habit and phenology factors were determined by simple correlation and principal component analysis. Strong positive correlations were found between vessel element length and fiber length, ray width and ray height, simple pits of fiber wall and paratracheal parenchyma distribution. The results of principal component analysis (PCA) disclose the primitive characteristics and the direction of xylem evolution of Korean diffuse-porous woods. The xylem evolution scenario for Korean dicotyledonous woods is considered to be developed in the direction of decreasing trends of vessel frequency, vessel element length, and length/diameter(L/D) ratio of vessel element but increasing trends of vessel diameter, fiber length/vessel element length(F/V) ratio, libriform wood fibers, simple perforation, and homogeneous ray composition. Increase of vessel diameter and decrease of vessel frequency seem to be related to the improvement of conductive efficiency, and increase of the vessel element length and occurrence of scalariform perforation in vessel element may be related to enhanced of conductive safety. Also the libriform wood fibers and ray features appear to have relationship with mechanical support and nutrient metabolism, respectively.

• Korean Journal of Plant Resources
• /
• v.11 no.3
• /
• pp.319-325
• /
• 1998

The developmental changes occuring in the secondary xylem of Aristolochia manshuriensis Komarov have been studied in different ages of vine stems. A. manshuriensis possesses typical storeyed cambium comprising both vertically elongated fusiform initials and almost isodiametric ray cell initials. Stems of A. manshuriensis have wide rays that make the secondary xylem appear dissected as other vine types. The length of vessel member and fiber remained relatively constant throughout the secondary growth. However, vessel diameter increases with the increasing age of stem till the cell reaches their maximum limit and later more or less stabilize in diameter while number of vessel per $\textrm{mm}^2$ is vice versa. Width and relative proportion of ray to axial elements gradually increased with the increasing age of stem and later remained relatively constant.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1693-1696
• /
• 2004

Synchrotron X-ray micro-imaging technique was employed to monitor non-invasively the refilling process of water inside the xylem vessels in bamboo leaves. The consecutive phase-contrast X-ray images clearly show both plant anatomy and the transport of water inside the xylem vessels. Traces of water-rise, vapor bubbles and variations of contact angle between the water front and the xylem wall were measured in real time. During the refilling process, air bubbles are removed when the rising water front halts at a vessel end for a while. Subsequently, it starts rising again at a higher velocity than the normal refilling speed. Repeated cavitation seems to deteriorate the refilling ability in xylem vessels. In dark environment, the water refilling process in xylem vessels is facilitated more effectively than in bright illuminated conditions. Finally, X-ray micro-imaging was famed to be a powerful, high resolution, real time imaging tool to investigate the water refilling process in xylem vessels.

• Journal of Plant Biology
• /
• v.28 no.1
• /
• pp.9-20
• /
• 1985

Dimensional variation of secondary xylem elements, such as vessel element and fiber, was investigated in root, stem and branch of Alnus hirsuta and A. firma. It is clear that vessel diameter in the root is the widest, next in the stem, and the least in the branch. Length of vessel element among them becomes, however, larger in following sequence; stem, root, and branch, whereas fiber diameter and length are the widest in the root, the second in the stem, and the least in the branch. The size of secondary xylem element at any one level in tree increases from the center (pith) of the organs through a number of annual rings to the outer.

• Journal of Plant Biology
• /
• v.28 no.2
• /
• pp.127-140
• /
• 1985

A comparative anatomy between the secondary xylem in the root and stem of Korean Betulaceae, including 5 genera and 6 species, was carried out in this study. Anatomical characteristics of the secondary xylem in the root and stem are as follows: Diameter of vessel and fiber is wider in the root than the stem, while the number of vessel and fiber per unit area is fewer in the root than the stem. The length of vessel element is longer in the stem than the root, whereas length of the fiber is longer in the root than the stem. Number of bar in the perforation plate is more in the stem than the root, and the angle of perforation plate is broader in the root than the stem. Number of ray per unit area is more in the root than the stem.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.4
• /
• pp.11-18
• /
• 2008

Anatomical characteristics of volumetric composition, fiber length, vessel diameter, and crystalline properties of cellulose in kenaf (Hibiscus cannabinus L.) planted in the reclaimed land of Buan-si, Korea were examined to understand the growth characteristics using a light microscopy and an X-ray diffraction method. The samples of kenaf were taken from six positions (3 cm, 35 cm, 70 cm, 105 cm, 280 cm, and 320 cm) of each stem over the growth period (July, August, September, and October) after seeding in the mid-May. In the kenaf stem, phloem constituted 10 to 15 %, xylem 66 to 82%, and pith 7 to 19%. The ray, bast fiber, and remainder comprised 50%, 20%, and 30% of the phloem, respectively. The volume of vessel, ray, and fiber in the xylem was approximately 10, 15, and 75%, respectively. The proportion of cell wall was 30.92% at the base of stem and 46.40% at the top of stem, respectively. The average length of bast fiber and xylem fiber was about 2.8 mm and 0.9 mm, respectively. Radial and tangential diameters of vessel increased with the increase of growth period, while they decreased with increasing the stem height. Relative crystallinity ranged from 70 to 79% in phloem and from 50 to 56% in xylem. Cellulose crystallite width was about 3 nm both in the phloem and xylem. Thus, the volumetric composition and cell dimensions in the phloem and xylem appeared to be varied with the growth period and the stem height.

• Journal of Plant Biology
• /
• v.27 no.3
• /
• pp.149-162
• /
• 1984

Anatomical characters of the secondary xylem in roots of Lauraceae, including 6 genera and 13 species grown in Korea, were studied systematically. Lauraceors members studied anatomically possess characters of the secondary xylem that are in the main more specialized than those found in the primitive angiosperm families. The specialized characters are as follows; (1) mostly solitary pores with some radially multiples, (2) mostly simple perforation plates and partially scalariform perforation plates in all species, (3) slightly oblique end wall of vessel element, (4) predominantly alternate intervascular pitting, (5) paratracheal axial parenchyma in all species, (6) heterogeneous II or III vascular rays. It is considered that the series of specialization in this family from the perforation plates and angle of end wall to the vessel axis is as follows; MachiluslongrightarrowNeolitsealongrightarrowLinderalongrightarrowCinammomumlongrightarrowIozostelongrightarrowLitsea.

• Journal of Plant Biology
• /
• v.34 no.1
• /
• pp.67-75
• /
• 1991

Anatomical study of the secondary xylem in Malvales plants, including four families, five genera and ten species grown in Korea, was carried out to elucidate relationship among genera or families in the order. Wood of Elaeocarpus is diffuse porous and shows angular vessels in radial multiples of 2-14 cells and a few apotracheal or paratracheal parenchyma. Tiliaceous genera have diffuse porous wood, vessels in solitary distribution and apotracheal parenchyma of sinuous scalariform uniseriate band. In the family, Tilia shows angular vessel. noded and tile-like cell in ray and storied tissue but Grewia has circular vessel. Hibiscus shows ring porous wood, circular solitary vessel and biseriate band of apotracheal and paratracheal parenchyma. Firmiana shows ring porous wood, circular solitary vessel and confluent parenchyma. Many starch grains appear in ray and axial parenchyma. Judging from arrangement, shape, length and diameter of vessel element and angle of end wall to vessel axis, and arrangement and shape of axial parenchyma, the lines of specialization in these genera are from primitive Elaeocarpaceae through less primitive Tiliaceae and less advanced Malvaceae to advanced Sterculiaceae.iaceae.

• Plant Resources
• /
• v.1 no.2
• /
• pp.121-125
• /
• 1998

Wood and bark structure of Laurus, which is considered as an important spice resources was characterized by several transitional and advanced features. Annual rings are distinct: vessel elements are moderately short and narrow, both simple and sealariform perforation plates. alternate intervascular pitting; irregularly septate fiber are present; parenchyma strands are scanty paratracheal: rays are both homogeneous and heterogeneous with multiseriate: phloem rays are dilated. Comparisons with other genera of Lauraceae suggest that Laurus is transitional and advanced state in evolutionary trends in the family.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.1
• /
• pp.7-12
• /
• 2010

Morphological characteristics of hemp fiber were investigated using a light microscope in order to provide fundamental data for the use of hemp as a papermaking law material. Phloem of hemp is composed of cortical parenchyma cells and bast fiber with thick walls while xylem is composed of vessel, wood fiber and ray parenchyma cells. Also there are solitary pore and radial pore multiple which exist in diffuse porous pattern. Ray cells consist of uniseriate rays and thin walled ray parenchyma cells. Wood fibers are composed of three types: a large diameter fiber with longer length; a large diameter fiber with shorter length; a small diameter fiber with medium length. Vessel elements are composed of: a medium length one; a longer length one; the one whose both end walls have ligules or tails. Parenchyma cells in xylem and pit parenchyma cells have completely different size and shape. For bast fiber, the average length is about 4.4 mm and the width is about $30.5\;{\mu}m$; for vessel element, $600.0\;{\mu}m$ in length and $493.6\;{\mu}m$ in width; for wood fiber, $1000\;{\mu}m$ and $38.9\;{\mu}m$; for parenchyma cell, $50\;{\mu}m$ and $26.4\;{\mu}m$.