• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.4
• /
• pp.335-342
• /
• 2021

By using HLS when developing a communication system FPGA, HDL code can be automatically generated from a little modified C/C++ source code used for performance verification, which has the advantage of shortening the development period. In this paper, a method of designing a telemetry standard 106-17 LDPC decoder in C language is proposed using Xilinx's Vivado HLS, and by synthesizing Spartan-7 and Kintex-7 as target devices, throughput and FPGA utilization rate was compared.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.3
• /
• pp.413-420
• /
• 2006

In this thesis, a RFID baseband system is implemented based on the international standard ISO/IEC 18000-6 Type-B using FPCA, and also anti-collision algorithm is implemented to improve the system performance. We compares the performance of the proposed anti-collision algorithm with that binary tree algorithm and bit-by-bit algorithm, and also validated analytic results using OPNET simulation. The proposed algorithm for Type-B transmission protocol and collision prohibition was designed using ISE7.1i which is a FPGA design-tool of Xilinx and implemented with Spartan2 chip which is a FPGA device.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.5
• /
• pp.452-459
• /
• 2020

The electric actuator receives the user's command input signal (open/closed/stop), checks the status of various sensors (valve position, rotational force, motor status, etc.)in the actuator, and controls the motor forward/reverse to open and close the valve. It is a device that outputs the current state of an actuator (valve) and is used in various fields such as dams, power plants, water and sewage facilities, and oil pipeline facilities. If an electric actuator is installed in a power plant and a problem occurs during operation, it can cause a large economic loss, so system reliability is vert important. In this study, in order to increase the safety of the electric actuator, the development of an electric actuator control device capable of setting the ON/OFF time in hardware was conducted to solve the reliability problem that may occur in software. In addition, the electric actuator control device development environment was developed using Xilinx's Spartan7 FPGA and Altium tool.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.10
• /
• pp.831-835
• /
• 2020

By automatically generating HDL codes from C/C++ source codes, HLS makes it possible to shorten FPGA system developing period through easy timing control and structure change. We designed LDPC encoder for telemetry standard 106-17 with Xilinx Vivado HLS and showed hardware structure can be easily adapted for different purposes through minor C code modification. Synthesis results targeting Spartan-7 xc7s100 device are presented for throughput and hardware complexity comparison.

• Proceedings of the KAIS Fall Conference
• /
• 2002.11a
• /
• pp.159-162
• /
• 2002

본 논문에서는 대역확산 방식으로 제안되고 있는 CDMA 시스템의 송수신 모뎀을 FPGA를 이용하여 설계 및 검증을 수행하였다. 송신기에서는 Walsh code(N=16), PN(7 stage=127chip)code를 데이터에 곱하여서 송신하고, 수신기에서는 송신기에서 사용했던 Walsh code(N=16)와 PN code를 사용하여 역확산 후 source data를 확인하였다. 송수신기의 설계는 Xilinx사의 FPGA 디자인 툴인 Xilinx foundation3.1을 사용하여 VHDL simulation을 수행하였고, FPGA 회로설계 검증 장비인 EDA-Lab 3000 장비를 사용하여 Xilinx사의 SPARTAN2 2S100PQ208칩에 다운로드 한 후 에뮬레이션 툴 인 Design-Pro shop을 사용하여 설계된 회로의 동작을 확인하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.1
• /
• pp.119-126
• /
• 2012

H.264/AVC can use three transforms depending on types of residual data which are to be coded. H.264/AVC always executes $4{\times}4$ DCT transform. In $16{\times}16$ intra mode only, $4{\times}4$ Hadamard transform for luma DC coefficients and $2{\times}2$ Hadamard transform for chroma DC coefficients are performed additionally. Quantization is carried out to achieve further data compression after transform coding is completed. In this paper, the hardware implementation for DCT transform, Hadamard transform and quantization is studied. Especially, the proposed architecture adopting the pipeline technique can output a quantized result per clock cycle after 33-clock cycle latency. The proposed architecture is coded in Verilog-HDL and synthesized using Xilinx 7.1i ISE tool. The operating frequency is 106MHz at SPARTAN3S-1000. The designed IP can process maximum 33-frame at $1920{\times}1080$ HD resolution.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.4
• /
• pp.1-6
• /
• 2020

This paper proposes the design of an advanced S-Box for calculating multiplicative inverse in AES encryption process. In this approach, advanced S-box module is first designed based on composite field, and then the performance evaluation is performed for S-box with multi-stage pipelining architecture. In the proposed S-Box architecture, each module for multiplicative inverse is constructed using combinational logic for realizing both small-area and high-speed. Through logic synthesis result, the designed 3-stage pipelined S-Box shows speed improvement of about 28% compared to the conventional method. The proposed advanced AES S-Box is performed modelling at the mixed level using Verilog-HDL, and logic synthesis is also performed on Spartan 3s1500l FPGA using Xilinx ISE 14.7 tool.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.1
• /
• pp.1-6
• /
• 2022

In this paper, the design of lightweight S-Box structure for implementing a low power AES cryptosystem based on composite field. In this approach, the S-Box is designed as a simple structure by which the three modules of x², λ, and GF((2²)²) merge into one module for improving the usable area and processing speed on GF(((2²)²)²). The designed AES S-Box is modelled in Veilog-HDL at structural level, and a logic synthesis is also performed through the use of Xilinx ISE 14.7 tool, where Spartan 3s1500l is used as a target FPGA device. It is shown that the designed S-Box is correctly operated through simulation result, where ModelSim 10.3. is used for performing timing simulation.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.7 s.337
• /
• pp.35-40
• /
• 2005

This paper proposes a fractional-N phase-locked loop (PLL) frequency synthesizer using the 3rd order ${\Delta}{\sum}$ modulator for 900MHz medium speed wireless link. The LC voltage-controlled oscillator (VCO) is used for the good phase noise property. To reduce the lock-in time, a charge pump has been developed to control the pumping current according to the frequency steps and the reference frequency is increased up to 3MHz. A 36/37 fractional-N divider is used to increase the reference frequency of the phase frequency detector (PFD) and to reduce the minimum frequency step simultaneously. A 3rd order ${\Delta}{\sum}$ modulator has been developed to reduce the fractional spur VCO, Divider by 8 Prescaler, PFD and Charge pump have been developed with 0.25um CMOS, and the fractional-N divider and the third order ${\Delta}{\sum}$ modulator have been designed with the VHDL code, and they are implemented through the FPGA board of the Xilinx Spartan2E. The measured results show that the output power of the PLL is about -lldBm and the phase noise is -77.75dBc/Hz at 100kHz offset frequency. The minimum frequency step and the maximum lock-in time are 10kHz and around 800us for the maximum frequency change of 10MHz, respectively.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.7
• /
• pp.402-413
• /
• 2004

This paper presents an Implementation of Korean standard 128-bit block cipher SEED for the small (8 or 16-bits) embedded system using a low-cost FPGA(Field Programmable Gate Array) chip. Due to their limited computing and storage capacities most of the 8-bits/16-bits small embedded systems require a separate and dedicated cryptography processor for data encryption and decryption process which require relatively heavy computation job. So, in order to integrate the SEED with other logic circuit block in a single chip we need to invent a design which minimizes the area demand while maintaining the proper performance. But, the straight-forward mapping of the SEED specification into hardware design results in exceedingly large circuit area for a low-cost FPGA capacity. Therefore, in this paper we present a design which maximize the resource sharing and utilizing the modern FPGA features to reduce the area demand resulting in the successful implementation of the SEED plus interface logic with single low-cost FPGA. We achieved 66% area accupation by our SEED design for the XC2S100 (a Spartan-II series FPGA from Xilinx) and data throughput more than 66Mbps. This Performance is sufficient for the small scale embedded system while achieving tight area requirement.