• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2424-2426
• /
• 2005

In whole world consciousness of environment maintenance have increased very quickly for he end of the 20th century. To use and disuse toxic substances have been controled at the field of industry. Also the field of lighting source belong to environmental control. And in the future the control will be strong. In radiational mechanism of fluorescence lamp mercury is the worst environmental problem. In radiational mechanism of fluorescence lamp mercury is the worst environmental problem root. In the mercury free lighting source system the Xe gas lamp is one type. And the Ne:Xe and Ne:Ar mixing gas lamp improvements firing voltage of Xe gas lamp. Purpose and subject of this study are understand, efficiency, ideal of Ne:Xe and Ne:Ar plasma which mercury free lamp. Before ICP was designed, basic parameters of plasma, which are electron temperature and electron density, were measured and calculated by langmuir probe data. Property of electron temperature and electron density were confirmed by changing ratio of Ne:Xe and Ne:Ar.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.4
• /
• pp.777-782
• /
• 2009

In this paper, the effect of the secondary electron emission coefficient of Xe ion on glow discharge was examined by ID numerical simulation. The simulation was performed for two distinct structures, short and long gaps. The features of the glow discharges in the both structures, firing and sustain voltages, luminance, and efficiency, were analyzed at various secondary electron emission coefficient of Xe ion.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.743-747
• /
• 2003

The improvement of luminance and luminous efficiency is the one of the most important part in AC-PDPs. To achieve high luminance and luminous efficiency, high VUV emission efficiency is needed. We measured the emission spectra of vacuum ultraviolet(VUV) and infrared(IR) rays in surface discharge AC-PDP with Ne-Xe mixture gas. The influence of Ne-Xe gas-mixture ratio on resonance state $Xe^{\ast}(3P_{1})$ and exited state $Xe^{\ast}(3P_{2})$ has been investigated. It is found that the intensity of VUV 147nm emission is proportional to that of the IR 828 nm emission, and the VUV 173nm emission is roughly proportional to that of the IR 823nm emission. The electron temperature and plasma density have been experimentally measured from the center of sustaining electrode gap by a micro Langmuir probe in AC-PDPs. The plasma density from the center of sustaining electrode gap are shown to be maximum value of $9{\times}10^{11}cm^{-3}$, where the electron temperature is about 1.6 eV in this experiment

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.83-87
• /
• 2003

One of the most serious problems in AC PDP is low luminous efficiency. One possible candidate for solving such a problem is using high Xe partial pressure. Increase of Xe percentages causes the driving voltage to rise, although brightness is increased. In this study, a new electrode structure is proposed to solve this problem. A test panel fabricated by using new electrode shows improvement of efficiency by 25% and reduction of sustain voltage by 20% compared with the conventional structure.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.10
• /
• pp.822-833
• /
• 2011

A Xe plasma flat lamp, which has been noticed as a new eco-friendly LCD (liquid crystal display) backlight, requires the improvement of the luminance and the luminous efficiency although it has several advantages. To improve the performance of a lamp, it is necessary to understand the effects of discharge variables on the luminous characteristics of the lamp. Since it is difficult to diagnose a lamp discharge experimentally, the numerical analysis can be used instead. In this study, the luminous characteristics of a planar type Xe plasma flat lamp were analyzed with the variation of an input voltage and a pulse frequency. The numerical analysis of a lamp discharge was then performed using a RCT (relaxation continuum) model and a LFA (local field approximation) model. The comparison with the experimental results showed that the RCT model is valid for the numerical analysis of the flat lamp. The numerical analysis also showed that the modifications of a high frequency component and a voltage falling rate in the input voltage waveform could improve the luminous characteristics of the lamp.

• Korean Journal of Optics and Photonics
• /
• v.5 no.3
• /
• pp.386-393
• /
• 1994

We have investigated output characteristics of XeCI excimer laser excited by transeverse electronbeam. We used e-beam output of 880 kV, 21 kA (70 ns, FWHM) and controlled current density of e-beam by pulsed magnetic coil (4.7 kG) which was fabricated around an e-beam diode (A-K gap is 21 mm) and laser chamber. We have obtained 35 J (4 atm) of e-beam deposition energy injected into laser media. The deposition energy was converted from an exposure area of Radcolor film and rising pressure of gas media which is measured by pressure jump method. The excited volume of $320cm^{3}$ was calculated. The maximum efficiency of 1.7% was obtained with the mixing ratio of HCllXe/Ar==0.2/ 6.3/93.5% and total pressure of 3 atm. Also laser output energy and specific energy were obtained 0.52 J and 1.7 J/I, respectively. For the analysis of experimental results we have developed computer simulation code. From the good agreements with the results of experiment and simulation we could theoretically explain the XeCI* formation channel. relaxation channel, and absorption channel of 308 nm.308 nm.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1074-1077
• /
• 2003

우리는 AC-PDP에서 휘도와 효율을 향상시키기 위하여 Ne-Xe(4%)와 He(7)-Ne(3)-Xe(3%)에 소량의 Ar 또는 Kr를 첨가하여 최적의 페닝 방전가스 혼합비를 연구하였다. 우리는 이것을 증명하기 위해 효율과 Q-V 방법을 이용하여 벽전하를 계산하였으며, 2차원 시뮬레이션에서의 결과값과 비교하였다. 200 Torr 압력에서 He-Ne-Xe 또는 Ne-Xe에 소량의 Ar(0.01-0.1%) 또는 Kr(0.01-0.1%)을 첨가시켰을 때, 우리는 20% 이상의 휘도의 증가와 25% 이상의 효율 증가를 발견하였고, 또한 벽전하도 25% 이상의 증가를 보였다. 400 Torr 압력에서 He-Ne-Xe-Kr(0.005%)에 소량의 Ar(0.005-0.1%)를 첨가시켰을 때는 8% 이상의 휘도의 증가와 18% 이상의 효율 증가, 12% 이상의 벽전하 증가를 확인하였다. 결론적으로 이 결과는 He, Ne, Ar, Kr 사이에 추가적인 페닝효과가 휘도와 효율을 향상시켰다는 것을 보여준다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.809-812
• /
• 2008

Structural parameter variation effects (changing the coplanar gap under different discharge dimensions) and use of complex gas mixtures (He, Ne, Ar and Xe) in mercury-free fluorescent lamps are studied in this paper. Pure Neon gas is the best buffer gas for obtaining high luminous efficiency in mercury-free fluorescent lamps. It is shown that with a shorter coplanar gap (30mm), a high luminous efficiency can be obtained at low operating voltage, as well as high luminance uniformity and stable discharge with a Ne-Xe 20% gas mixture.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.491-494
• /
• 2004

With recent experiments to add He atoms to the Ne-Xe discharge gas mixture for high luminous efficiency PDPs, we have performed simulations on a coplanar structured AC-PDP sustained in the three species He-Ne-Xe gas mixture. We found that the correct ion mobilities are essential to get the meaningful simulation results. We determined ion mobilities in the mixture gas and presented the calculated results regarding the influence of ion mobilities on discharge characteristics.

• Proceedings of the KIEE Conference
• /
• 2003.10a
• /
• pp.148-150
• /
• 2003

We investigated the discharge characteristics by adding a little $N_2$ to the mixed gas, Ne+Xe+He, as the working gas in AC PDP. In this study, it is founded that the luminance and efficiency of the panel included a little $N_2$ increased and the discharge firing voltage is reduced. In addition, the characteristics of jitter and delay time are investigated.