• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.1
• /
• pp.49-56
• /
• 2004

An OFDM system using cross-handed circular Polarization(XCP-OFDM) is newly proposed in his paper. The proposed XCP-OFDM system divides the subchannels into a right-handed circular polarization(RHP channel and a left-handed circular polarization(LHCP) channel that alternate each other. Therefore, the overlaps between subcarriers in XCP-OFDM system can be reduced to a great extend compared to the conventional OFDM system. By this reason, it can improve the orthogonality and reduce the inter-channel interference due to frequency offset. In this paper, it can be seen that the proposed XCP-OFDM system shows robust against frequency offset.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1581-1585
• /
• 2005

This paper describes the design and implementation of a XCP (Xeline Control Protocol) network system. XCP is an information oriented protocol which delivers information with high reliability according to the predefined rule. The XCP network system is implemented with partly hardware and partly software based on the power line communication(PLC) environment. A network management tool which interacts with devices is also developed. In order to verify the feasibility of the proposed architecture, the implemented XCP network system is evaluated using a lighting control system.

• Journal of the Korean Society of Radiology
• /
• v.6 no.6
• /
• pp.465-471
• /
• 2012

In this study, three dimensional X-ray dose distribution from dental X-ray generator system was measured by ALOKA PDM-117 dosimeter. The X-ray dose distribution will be change with XCP-DS FIT in oral shot, because the distance between X-ray generator and the dosimeter. The X-ray dose change affects on patient exposure and radiograph image quality. Therefore, it is important to obtain relation between the X-ray dose and the distance. The X-ray dose at the central position was decreased with increasing the distance. Furthermore, the dose at the edge of the X-ray flux was increased with increasing the distance. The increased dose affects on the patient radiation exposure. The present results will provide for good dental radiograph image and reducing radiation over-exposure on patient.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.3
• /
• pp.316-322
• /
• 2002

The Orthogonal Frequency Division Multiplexing(OFDM) is a special case of multicarrier transmission, where a single data stream is divided into many subcarriers and transferred in a parallel way. It reduces the necessary bandwidth using the orthogonality between the subcarriers. Therefore it requires the transmission channel which has stable characteristic. When the delay spread of the channel exceed the guard interval, then the orthogonality of the subcarriers cannot maintain and as a result the system performance degrade. In this paper, the XCP-OFDM(OFDM using cross-handed Circular Polarization) system is newly proposed. This system divides the channel in order to eliminate the overlapping of subcarrier's spectrum by using cross-handed circular polarization. Therefore, the proposed XCP-OFDM system can improve the performance without increasing the guard interval. Both theoretical analysis and simulation results are described.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.114-116
• /
• 2006

XCP (eXtensive Control Protocol) is an information oriented protocol which delivers information with high reliability according to the predefined rule. XCP network system can be implemented on top of several physical layer such as power line, IEEE 802.15.4 and so on. In this paper. a monitoring software that evaluates the reliability and performance of the XCP network is designed and implemented. This paper presents the structure and method of the packet monitoring in the network through several interfaces such as RS-232, ethernet.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.333-334
• /
• 2007

본 논문에서는 다양한 이종 기기로 구성된 XCP 제어 네트워크를 위한 라우터를 설계하고 구현하는 방법에 대해 제안한다. XCP 네트워크에서는 통신 보안을 위한 패킷 암호화 방법이 사용되며, 동일 서브넷 내에서는 같은 암호화 키를 사용한 통신을 한다. 제안된 XCP 라우터는 이종의 기기로 구성된 XCP 서브넷 간의 통신을 지원하며, 암호화 기능을 사용하는 서브넷 간의 통신을 위하여 암호화 키를 변환해주는 기능을 수행한다.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.24 no.2
• /
• pp.371-379
• /
• 1994

본 연구는 비규격화시켜 촬영한 두장의 방사선 사진을 일반 영상처리 프로그램으로 기하학적 보정을 하여 디지탈 공제 촬영술을 시행한 결과를 개인별로 제작된 필름유지장치를 이용하여 규격화 시켜 촬영한 두장의 방사선사진을 디지탈 공제 촬영술을 시행한 결과와 비교하여 일반 영상처리 프로그램의 임상적 유용성을 평가해보고자 시행하였다. 19명의 자원자를 대상으로 하여, 각 환자에서 4매의 하악구치부 치근단 사진을 촬영하였다. 그중 2매는 XCP 필름 유지장치만으로 평행촬영법으로 촬영하였고, 나머지 2매는 교합제에 인상재를 부가하여 개인별로 제작된 XCP필름 유지장치를 이용하여 표준화시켜 역시 평행촬영법으로 촬영하였다. 기하학적 보정은 "Adobe Photoshop"과 "NIH Image" 프로그램으로 시행하였다. 특히 "Adobe Photoshop"의 임의영상회전 기능과 "IH Image"의 공제시술시 중첩된 사진을 투명하게 보여주는 기능, 병진기능을 활용하였다. 두 사진의 유사성을 측정하기 위해 공제된 사진의 계조도의 표준편차를 구하였다. 표준화군의 평균 표준편차가 기하학적 보정군의 평균 표준편차보다 약간 낮았으나, 통계적으로 유의성이 있는 차이를 보이지는 않았다. 위의 결과로 미루어보아, 하악구치부 에서 XCP필름 유지장치로 평행촬영한 비표준화방사선사진을 "Adobe Photoshop"과 "NIH Image" 프로그램을 이용하여 기하학적 보정을 할 수 있으리라 사료된다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12B
• /
• pp.1741-1746
• /
• 2001

This paper proposes the OFDM system that uses circularly polarized waves for improving the system performance. The circular polarization has the characteristic that it cannot receive the waves which are reflected by odd times. Using this characteristic, a modified OFDM system that uses the cross-handed circular polarization(XCP-OFDM) is newly proposed. By using the characteristic of circular polarization, it is clearly seen that the system performance of XCP-OFDM can be improved to a great extent. This is due to a reduction of the interferences caused by reflected waves and inter-channel interference. Both theoretical analysis and system simulation results are described.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.16 no.1
• /
• pp.103-112
• /
• 1986

The purpose of this study was to investigate the numbers and causes of retakes in 300 complete mouth radiographic surveys made by 75 senior dental students. According to radiographic techniques and film holding methods, they were divided into 4 groups: Group Ⅰ: Bisecting-angle technique with patient's fingers. Group Ⅱ: Bisecting-angle technique with Rinn Snap-A-Ray device. Group Ⅲ: Paralleling technique with Rinn XCP instrument (short cone) Group Ⅳ: Paralleling technique with Rinn XCP instrument (long cone) The most frequent cause of retakes, the most frequent tooth area examined, of retakes and average number of retakes per complete mouth survey were evaluated. The obtained results were as follows: Group Ⅰ: Incorrect film placement(47.8%), upper canine region, and 0.89 Group Ⅱ: Incorrect film placement (44.0%), upper molar region, and 1.12. Group Ⅲ: Incorrect film placement (79.2%), upper molar region, and 2.05 Group Ⅳ: Incorrect film placement (67.7%), upper molar region, and 1.69. The average number of retakes per complete mouth survey of paralleling technique (Group Ⅲ＋Ⅳ) was higher than that of bisecting-angle technique (Group Ⅰ ＋ Ⅱ) (p<0.01). There was no difference between Group Ⅰ and Group Ⅱ, and between Group Ⅲ and Group Ⅳ in the average number of retakes per complete mouth survey (p>0.05).

• Imaging Science in Dentistry
• /
• v.32 no.3
• /
• pp.147-151
• /
• 2002

Purpose: To compare the standard deviation of gray levels on digital subtracted images obtained by different dental subtraction programs. Materials and Methods: Paired periapical films were taken at the lower premolar and molar areas of the phantoms involving human mandible. The bite registration group used Rinn XCP equipment and bite registration material, based on polyvinyl siloxane, for standardization. The no bite registration group used only Rinn XCP equipment. The periapical film images were digitized at 1200 dpi resolution and 256 gray levels by a flat bed scanner with transparency unit. Dental digital subtraction programs used for this study were Subtractor (Biomedisys Co., Korea) and Emago (Oral Diagnostic Systems, The Netherlands). To measure the similarities between the subtracted images, the standard deviations of the gray levels were obtained using a histogram of subtracted images, which were then analyzed statistically. Results: Subtracted images obtained by using the Emago program without manual selection of corresponding points showed the lowest standard deviation of gray levels (p<0.01). And the standard deviation of gray levels was lower in subtracted images in the group of a bite registration than in the group of no use of bite registration (p < 0.01). Conclusion: Digital radiographic subtraction without manual selection of reference points was found to be a convenient and superior method.