• 제목/요약/키워드: X-ray diffraction test

검색결과 476건 처리시간 0.028초

냉간 압연한 17Mn-1.58Al TWIP강의 미세조직 및 기계적 특성에 미치는 열처리 영향 (Effect of Heat Treatment on Microstructure and Mechanical Properties of Cold-Rolled 17Mn-1.58Al TWIP Steel)

  • 김신영;김정석
    • 한국재료학회지
    • /
    • 제33권11호
    • /
    • pp.482-490
    • /
    • 2023
  • The purpose of this study was to analyze microstructural changes and evaluate the mechanical properties of TWIP steel subjected to variations in heat treatment, in order to identify optimal process conditions for enhancing the performance of TWIP steel. For this purpose, a homogenization heat treatment was conducted at 1,200 ℃ for 2 h, followed by hot rolling at temperature exceeding 1,100 ℃ and cold rolling. Annealing heat treatment is achieved using a muffle furnace in the range of 600 ℃ to 1,000 ℃. The microstructure characterization was performed with an optical microscope and X-ray diffraction. Mechanical properties are evaluated using micro Vickers hardness, tensile test, and ECO index (UTS × Elongation). The specimens annealed at 900 ℃ and 1,000 ℃ experienced a significant decrease in hardness and strength due to decarburization. Consequently, the decarburization phenomenon is closely related to the heat treatment process and mechanical properties of TWIP steel, and the effect of the microstructure change during annealing heat treatment.

A highly effective route for removal of Hg2+ from the waste water using 3-nitrobenzelidenemalononitrile as a modifier of Fe3O4@SiO2 nanoparticles

  • Mosleh Mehryar;Ghasem Marandi
    • Advances in nano research
    • /
    • 제16권1호
    • /
    • pp.1-9
    • /
    • 2024
  • SiO2-coated magnetic nanoparticles (Fe3O4@SiO2 NPs) were modified by 3-nitrobenzelidenmalononitrile and used as green linkages for removal of Hg2+ form the wastewater. In this research, it has been attempted to refer to the harmful effects of mercury ions for living things and how to remove such ions using very easy and practical technique. This study shows that by optimizing the test conditions, the efficiency of the removal of harmful ions such as mercury from the water contaminated with these ions can be increased. Conditions such as temperature, speed of agitation, pH of solution were tested for removal of mercury ions. The advantages of this method over other methods listed in the article are the rapid and easy nanocry synthesis. The generated and modified Fe3O4@SiO2 nanoparticles were characterized by X-ray diffraction, fourier transform infrared and scanning electron microscopy spectroscopy. The results show that the synthesized magnetic nanoparticles have the excellent performance for the removal of mercury(II) ion from the waste water.

Mechanical properties of CaO-MgO-Al2O3-SiO2-based glass-ceramic glaze for ceramic tiles fabricated by controlled heat-treatment

  • Jeong-U Eom;Seunggu Kang;Kangduk Kim;Jin-Ho Kim
    • Journal of Ceramic Processing Research
    • /
    • 제22권5호
    • /
    • pp.568-575
    • /
    • 2021
  • Glass-ceramic glazes were prepared using a CaO-MgO-Al2O3-SiO2 system and were used to fabricate low-temperature firing,high-hardness glazes in ceramic tiles. Additives (B2O3) and a nucleating agent (TiO2) were added to the glaze, and crystallineglazes were obtained by sintering at 1000 ~ 1100 oC for 30 or 60 min. X-ray diffraction analysis of the glazes suggested thatcordierite (Mg2Al4Si5O18) and anorthite (CaAl2Si2O8) crystal phases were present, and the peak intensity of the cordieritecrystal phase increased with increasing sintering temperature. All samples showed high crystallinities of 70% or more,irrespective of sintering temperature or time. The glaze density increased with increasing sintering temperature and decreasedat 1100 oC. The Vickers hardness test results of the glazes indicated high hardness values of 6.79 and 6.77 GPa after 30 minheat treatment at 1000 oC and 60 min at 1050 oC, respectively. Glass-ceramic glaze with high hardness at low temperature wasfabricated through crystallization of glaze for tiles.

MICROSTRUCTURE AND MECHANICAL PROPERTIES OF EQUIATOMIC AND NON-EQUIATOMIC TiMoTaNbV HIGH ENTROPY ALLOYS PREPARED USING VACUUM ARC REMELTING

  • SEONGI LEE;KWANGMIN LEE
    • Archives of Metallurgy and Materials
    • /
    • 제65권4호
    • /
    • pp.1311-1315
    • /
    • 2020
  • This study investigates the microstructures and the mechanical properties of equiatomic Ti20Mo20Ta20Nb20V20 and non-equiatomic Ti40Mo15Ta15Nb15V15 and Ti60Mo10Ta10Nb10V10 HEAs using X-ray diffraction (XRD) analysis, field emission scanning electron microscope (FE-SEM), and micro-Vickers hardness test. The specimens were fabricated using the vacuum arc remelting (VAR) process and homogenized at a temperature of 1300℃ for 4 h in a vacuum atmosphere. The determined thermodynamic parameters, Ω ≥ 1.1, δ ≤ 6.6%, and VEC < 6.87, suggested that the HEAs consisted of BCC solid solutions. XRD patterns of all the HEAs displayed single BCC phases. The difference in the solidification rate led to the micro-segregation associated with the elements Ta and Mo enriched in the dendrite arms and the elements V and Ti in the inter-dendritic regions. The HEA specimens showed a decrease in hardness with higher concentration of Ti element because the intrinsic hardness of Ti is lower as compared to the intrinsic hardness of Nb and Mo.

거두와 적두전분의 이화학적 특성 및 Gel 특성에 관한 연구 (A Comparison Study on Physicochemical Properties of Two Small Red Bean ( Black and Red ) Starches and Gels)

  • 채선희;손경희
    • 한국식품조리과학회지
    • /
    • 제6권2호
    • /
    • pp.7-14
    • /
    • 1990
  • This study has been carried out in order to investigate the physicochemical properties of two small red bean starches. Some of rheological properties of the starch gels were also studied by experiments of various starch concentrations. Water binding capacity of black bean starch was 172.3% and that of red bean starch was 199.0%. Black bean starch had lower swelling power than red bean starch, but the solubility of the black bean starch was higher. When the temperature increased from 60$^{\circ}C$ to 70$^{\circ}C$, the transmittance of two starches rapidly increased. The gelatinized temperature in DSC for black bean was 66.2$^{\circ}C$ and that for red bean was 66.0$^{\circ}C$. Black bean and red bean starches had the blue vlaues of 0.55 and 0.56 and the alkali numbers of 4.40 and 4.13. The molecular weight of amylose was 40,000 and 33,611. The amylose contents of two starches were same at 52%. Brabender Amylographs of two small red bean starch pastes showed C pattern, which is stable. The results of compression test pointed out that TPA parameters varied with the change of storage time, and black bean starch gels had the higher TPA value. The retrogradation study by glucoamylase digestion method revealed that red bean starch gels were more easily retrogradated than black bean. X-ray diffraction patterns of two small red bean starches were A pattern, and diffraction peaks disappeared with gelatinization of starches.

  • PDF

철계 비동일분율 고엔트로피 합금의 인장 강도에 미치는 소결 조건 영향 (Effect of Sintering Condition on Tensile Strength of Fe-based Non-equiatomic High Entropy Alloy)

  • 서남혁;전준협;김광훈;박정빈;손승배;이석재
    • 한국분말재료학회지
    • /
    • 제28권3호
    • /
    • pp.221-226
    • /
    • 2021
  • We fabricate the non-equiatomic high-entropy alloy (NE-HEA) Fe49.5Mn30Co10Cr10C0.5 (at.%) using spark plasma sintering under various sintering conditions. Each elemental pure powder is milled by high-energy ball milling to prepare NE-HEA powder. The microstructure and mechanical properties of the sintered samples are investigated using various methods. We use the X-ray diffraction (XRD) method to investigate the microstructural characteristics. Quantitative phase analysis is performed by direct comparison of the XRD results. A tensile test is used to compare the mechanical properties of small samples. Next, electron backscatter diffraction analysis is performed to analyze the phase fraction, and the results are compared to those of XRD analysis. By combining different sintering durations and temperature conditions, we attempt to identify suitable spark plasma sintering conditions that yield mechanical properties comparable with previously reported values. The samples sintered at 900 and 1000℃ with no holding time have a tensile strength of over 1000 MPa.

포항-울산간의 점토자원의 지질과 그 물리화학적 특성에 관한 연구 (A Study on Geology of Clay Mineral Deposits of Pohang-Ulsan Area and their Physico-Chemical Properties)

  • 김옥준;이하영;김서운;김수진
    • 자원환경지질
    • /
    • 제4권4호
    • /
    • pp.167-215
    • /
    • 1971
  • I. Purpose and Importance of the Study The purpose of the present study is to clarify to geological, mineralogical, and physico-chemical properties of the clay minerals deposits imbedded in the Tertiary sediments in the areas between. Pohang and Ulsan along southeastern coastal region of Korea. These clays are being mined and utilized for filter and insecticide after activation or simple pulverizing, nontheless activated clays are short coming as chemical industry in Korea has been rapidly grown in recent years. In spite of such increase in clay demand, no goological investigation on clay deposits nor physico-chemical properties of the clays have been carried out up to date. Consequently activated clays produced in Korea is not only of low grade but also of shortage in supply, so that Korea has to import activated clays of better grade. The importance of the present study lies, therefore, on that guiding principle could be laid down by knowing stratigraphical horizons, of clay deposits and fundamental data of improving grade of activated clays might be derived from the results of physico-chemical examinations. II. Contents and Scope of the study The contents of the study are pinpointed down in the following two subjects: 1) General geological investigation of Tertiary formations distributed in the areas between Pohang and UIsan, and detail geological study of the bentonitic clay deposits imbedded in them. 2) To clarifty physico-chemical characteristics of the clays by means of chemical analysis, X-ray diffraction and electron microscope. The scope of the study involves the following there points: i) Regional geological investigation-This investigation has been carried out in order to find out the distribution of Tertiary sediments and exact location of clay mineral deposits in the areas between Pohang and UIsan. ii) Detail geological investigation-This has been concentrated in and around the clay deposits which. had been found out by the regional investigation. iii) Laboratory researchs include i) age determination and correlation of Tertiary sediments by paleontological study, and ii) Chemical analysis, X-ray diffraction, and electron microscopic studies on clays, samples taken from various clay deposits. III. Research Results and Suggestions 1) The geology of the area investigated is composed mainly of Janggi and Beomgokri groups of Miocene age in ascending order rested on the upper Silla system, Balkuksa granite and volcanic rocks of upper Cretaceous age as base. 2) Janggi group is composed in ascending order of Janggi conglomerate, Nultaeri rhyolitic tuff, Keumkwangdong shale, two beds of lignite-bearing formations which consist of alternation of conglomerate, sandstone and mudstone, and andesitic, rhyolitic, and basaltic tuff beds. 3) Beomgokri group is mainly composed of andesitic to rhyolitic tuff interlayered by conglomerate and tuffaceous sandstone. In the areas around boundary between North-and South Kyeongsang-do is distributed Haseori farmation which is composed of conglomerate, sandstone, mudstone and andesitic to rhyolitic tuff, and which is correlated to Eoilri formation of Janggi group. 4) Clay deposits of the area are interbedded in Eoilri, Haseori, Nultaeri tuff, Keumkwangdong shale, upper and lower horizon of the lower lignite-bearing seam, and Keumori rhyolitic tuff formations of Janggi group; and are genetically classi.fied into four categories, that is, i) those derived from volcanic ash beds(Haseori and Daeanri deposits), ii) those of secondary residual type from rhyolitic tuff beds(Seokupri deposits), iii) Clay beds above and beneath the lignite seams, (Janggi and Keumkwangdong deposits), and iv) those derived from rhyolitic tuff beds(Sangjeong and Tonghae deposits). 5) Mineral constituents of clay deposits are, according to X-ray diffraction, montmorillonite accompanied in different degree by cristobalite, plagioclase, quartz, stilbite, and halloysite in rare occasion. The clays are grouped according to mineral composition into four types; i) those consist mostly of montmorillonite, ii) those composed of montmorillonite and cristobalite, iii) those composed of montmorillonite and plagioclase, and iv) those composed of montmorillonite, plagioclase and quartz. 6) Clays interbedded in Haseori formation and vicinity of lignite seams belong to the first type, are of good quality and derived either from volcanic ash bed, or primary clay beds near lignite seams. Clays belonged to other types are derived from weathering of rhyolitic tuff formations and their quality varies depending upon original composition and degree of weathering. Few clays in secondary residual type contain small amount of halloysite. 7) Judging from analytical data, content of silica($SiO_2$) varies proportionally with content of cristobalite, and alumina($Al_2O_3$) content does not vary with that of plagioclase, but increases in the sedimentary bedded type of deposits. 8) It is unknown whether or not these days could be upgraded by beneficiation since no grain size of these impurities nor beneficiation test had been studied. 9) Clay beds derived from valcanic ash layers or sedimentary layers at the vicinity of lignite seams are thin in thickness and of small, discontinueous lenticular shape, although they are of good quality; and those derived from rhyolitic tuff formations or residual type from tuff are irregular in both occurrence and quality. It is, therefore, not only very difficult but also meaningless to calculate its reserve, and reserve estimation, even if done, will greatly be deviated from practically minable one. Consequently, way of discovery and exploitation of clay deposits in the area under consideration is to check the geologically favorable areas whenever needed.

  • PDF

짐바브웨산 블랙다이아몬드 원석의 보석학적 감별연구 (Gemological Identification of Black Diamonds Roughs from Zimbabwe)

  • 송오성;김준환;김기훈
    • 한국산학기술학회논문지
    • /
    • 제10권11호
    • /
    • pp.3054-3059
    • /
    • 2009
  • 블랙다이아몬드는 단결정형, 다결정형, 혼합형 등의 결정질을 가지고 산업용, 보석용으로 활용도가 높다. 3ct~30ct급의 짐바브웨에서 산출된 천연 블랙 다이아몬드 러프(roughs)를 이용하여 통상적인 감별법인 열전도, 밀도검사, 스크래치검사, 확대검사와 첨단 감정 방안인 라만스펙트럼과 XRD회절 및 Lang이미지 분석을 실시하였다. 통상적인 감별방안으로는 신속성과 경제성을 고려하면 SiC스크래치검사와 확대검사를 혼합하는 방안이 유리하였다. 첨단 감정 방안으로는 라만분석으로는 블랙다이아몬드의 감별이 용이하였으나, 블랙다이아몬드 러프는 단결정과 다결정의 경우가 많아서 XRD 회절 방법으로 원석의 결정성 판단이 어려울 수 있었다. 그러나 일단 확인된 회절조건에서는 손쉽게 결정립을 Lang이미지분석을 통하여 원석의 결정상태의 시각화가 가능하였다.

D.C. magnetron sputter를 이용한 Ag layer 건식 도금층의 특성 평가 국제 표준화에 대한 연구 (A Study on the standardize the characteristic evaluation of DC magnetron sputtered silver coatings for engineering purposes)

  • ;최진혁;임태관;정명준;이수완
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2015년도 추계학술대회 논문집
    • /
    • pp.249-249
    • /
    • 2015
  • Silver films have been of considerable interest for years due to their better performance relative to other metal films for engineering applications. A series of multi-layer silver coatings with different thickness (i.e. 0.3 um to 1.5 um) were prepared on Aluminium substrate containing copper undercoat by direct current (DC) magnetron sputtering method. For the comparative purpose, similar thickness silver coatings were prepared by electrolytic deposition method. Microstructural, morphological, and mechanical characteristics of the silver coatings were evaluated by means of scanning electron microscope (SEM), X-ray diffraction (XRD), Surface roughness test, microhardness test and nano-scratch test. From the results, it has been elucidated that the silver films prepared by DC magnetron sputtering method has superior properties in comparison to the wet coating method. On the other hand, DC magnetron sputtering method is relatively easier, faster, eco-friendly and more productive than the electrolytic deposition method that uses several kinds of hazardous chemicals for bath formulation. Therefore, a New Work Item Proposal (NWIP) for the test methods standardization of DC magnetron sputtered silver coatings has recently been proposed via KATS, Korea and a NP ballot is being progressed within a technical committee "ISO/TC107-metallic and other inorganic coating".

  • PDF

Rice husk ash를 이용한 토질안정처리 (Soil Stabilization with time and Rice Husk Ash)

  • 민덕기;황광모;김현도;황택진
    • 한국지반공학회논문집
    • /
    • 제18권5호
    • /
    • pp.19-25
    • /
    • 2002
  • 생석회 혼합처리에 의한 지반개량은 토중수의 흡수, 팽창 그리고 지반을 구성하고 있는 광물들과의 화학적 반응들에 의해 이루어지며, 흙 속에 함유된 실리카(SiO2)와 알루미나($Al_2O_3$)의 함유량이 혼합토의 강도개선에 크게 영향을 미친다. 따라서, 본 연구에서는 실리카를 주 구성성분으로 하는 rice husk ash(RHA, $SiO_2$=91.65%, 왕겨재)를 생석회와 함께 첨가하여 연약토를 개량하고자 하였다. RHA가 첨가된 혼합토에 대한 각종 실험결과, 생석회에 의한 강도발현을 더욱 촉진시키고, 압축특성 및 팽창특성이 감소되는 것으로 나타났다. 대상토에서 유기물을 제거한 후 생석회와 RHA를 첨가한 경우, 유기물 함유율이 적을수록 혼합토의 강도가 증진되는 것으로 나타났다. 따라서, 지반 개량을 위한 첨가재로써 생석회만 사용하는 경우보다 2차 첨가재인 RHA를 첨가하는 것이 강도개선 및 압축특성 개선에 유효함을 확인할 수 있었다.