• Journal of radiological science and technology
• /
• v.20 no.2
• /
• pp.49-55
• /
• 1997

This study was carried out to investigate radiographical and operating conditions of X-ray units and exposure doses to patients during chest radiography, so that the results could provide basic data used for reducing the exposure dose and for providing the diagnostic information with better quality. The conditions and exposure doses of 100 X-ray units mainly used for chest radiography were examined and also 100 radiological technologists mainly handling those apparatus at 76 medical facilities in Pusan were surveyed using a questionnaire from October 1 to December 31 in 1995. The following results were obtained from the study : 1. It was found that most units were capable of taking a high tube voltage radiography by showing 67% of the units equipped with the maximum tube voltage of 150 kV, 94% with more than 500 mA for the rating capacity and 85% with the full wave type of a signal phase. 2. For actual chest radiographical conditions, however, 80% of the units were operated at $60{\sim}100\;kVp$ and only 14% at 100 kVp and over for the high tube voltage. 3. The average exposure time was less than 0.1 second, and eighty four percent of the units adapted the X-ray tube currents ranging from 200 to 300 mA, 80% the focus-film distances between 180 and 210 cm, and 63% the focus sizes of more than 2.0 mm. 4. Most units(98%) employed additional filters made of aluminum, 75% the thickness of filters less than 2.0 mm, and only 2 units the compound filters. 5. Ortho chromatic system was only adopted in 13% of screen film system for the units, and 73% used the grid ratio at 8 : 1 for the low tube voltage during chest radiography. 6. The average exposure dose of all X-ray units during chest radiography was $371\;{\mu}Sv$ with a difference of about 16 times between the minimum to the maximum, and $386\;{\mu}Sv$ both at hospitals and at health centers, followed by $380\;{\mu}Sv$ at general hospitals and $263\;{\mu}Sv$ at university hospitals without showing any statistically significant differences. In conclusion, since patients during chest radiography at medical facilities in Pusan exposed to high levels of radiation, it is recommended that appropriate added filters and grids necessary for the high tube voltage radiography and high-speed screen systems should be adopted and used as soon as possible in order to reduce exposure dose to the patients.

• Journal of Acupuncture Research
• /
• v.17 no.4
• /
• pp.88-99
• /
• 2000

Objectives : This study was performed to evaluate the clinical effect of acupuncture on microtraumatic injuries of the knee joint. Methods : Among the outpatients with knee joint pain who visited to Department of Acupuncture & Moxibustion, National Medical Center from February 2000 to September 2000, we selected 15 cases that showed normal finding in both X-ray and neurological examination, and that were categorized into microtraumatic injuries by the physical examination based on the Cyriax's orthopedic medicine. During acupuncture therapy, the patients were ordered to move involved side actively. The effect was assessed through questionnaires of CNRS(Cincinnati Knee Rating System). Results : We investigated 11 female and 4 male patients. The most common distribution of age was 30's(40%). The most commom duration of symtoms was from 3 to 5 months(40%). The most common microtraumatic injury was pes anserinus bursitis(33.3%), and followed by iliotibial band friction syndrome(20%), and patellar tendinitis(20%). In the CNRS, the mean number of before treatment was 60.6 and after was 66.5. 10 cases among the 15 patients were improved(66.6%). Conclusions : These results suggest that the acupuncture therapy combined with active movements of involved side was effective treatment modality on microtraumatic injuries of the knee joint.

• Imaging Science in Dentistry
• /
• v.34 no.1
• /
• pp.19-23
• /
• 2004

Purpose: To compare the diagnostic accuracy of Kodak Insight film with other intra-oral films in the detection of dental caries. Materials and Methods : Periapical radiographs of 99 extracted human teeth with sound proximal surfaces and interproximal artificial cavities were made on Kodak Ultra speed, Ektaspeed, Agfa Ektaspeed and Kodak Insight films and automatically processed. Six dentists examined the presence of dental caries using a five-point confidence rating scale and compared the diagnostic accuracy by ROC (Receiver Operating Characteristic) analysis and ANOVA test. Results: The sensitivity of Kodak Ultra speed, Ektaspeed, Agfa Ektaspeed and Insight film were 0.84, 0.77, 0.75 and 0.79 respectively. The specificity of Kodak Ultra speed, Ektaspeed, Agfa Ektaspeed and Insight film were 0.97. 0.95. 0.96 and 0.94 respectively. The mean ROC areas (Az) of Kodak Ultra speed, Ektaspeed, Agfa Ektaspeed and Insight film were 0.917, 0.910, 0.894, 0.909 respectively. There was no significant differences between Az of Insight film and other films (p = 0.178). Conclusion: Theses results suggested that Kodak Insight film have the comparative diagnostic accuracy of dental caries with Ultraspeed and Ektaspeed films.

• Korean Journal of Adult Nursing
• /
• v.28 no.5
• /
• pp.491-500
• /
• 2016

Purpose: The purpose of this study was to examine the effect of resistive exercise using an elastic band on range of motion, function and shoulder pain. Methods: Forty two subjects who had rotator cuff surgery were assigned either to a treatment or a comparison group, twenty one each. Following a six week period after surgery those in the treatment group participated in resistant exercise using an elastic band for four weeks. The subjects in the comparison group did not participate in the exercise program. The goniometer measured range of motion, a modified tool measured function, and a self report numerical rating scale measured pain. The data were analyzed using $x^2$ test, Fisher's exact, t-test and the Mann-Whitney Test. Results: Although not statistically significant, there was a trend that more subjects in the treatment group had increased range of motion. There was a statistically significance among the treatment group in terms of increased function (p=.015). Further the treatment group reported less pain that those in the comparison group (p<.001). Conclusion: The findings support that resistance exercise is an effective strategy for patients with rotator cuff repair.

• Journal of Korean Academy of Nursing
• /
• v.10 no.2
• /
• pp.41-52
• /
• 1980

As it Provides nursing students the opportunity for correlating principles and practice, clinical practice h s been considered as on of the most important part of nursing education. This study was desinged to measure the level of satisfaction in according with the conten. guidance environment. hours and the evaluation of clinical pracice. and to investigate the extent of influence of the variables have on the level of satisfaction. Two hundred and fifty-two nursing students from 9 baccalaureat programs in Seoule were randomly sampled. Instrument consists of forty questionaires. developed by the researcher, was used to gather data data from September 7 through 22, 1978. The level of satisfaction was measured by 5 Point rating scale(Likert-type). and level of significance were(t-test. F-test ＆ X$^2$-test). -Results are as follow; 1. Level of satisfation according to the four variables ( class health. academic achievement, motives) revealed no significant difference. (P>.05). Hypothesis 1,2,3,4, are rejected. 2. Level of satisfaction according to the two variables (clinical instructor interpersonal relationship) revealed significant difference. (p<.01, p<.05), Hypothesis 5,6 are accepted. 3. Level of satisfaction of contents (mean score=3.02) revealed to be high.. 4. Level of satisfaction on guidance (mean Score=2.37), environment (mean score=2.59), hours (mean score=2.72) and evaluation (mean score=2.50) revealed to be low. 5. Level of satisfaction revealed to be low. (total mean satisfaction score =2.64).

• Journal of Korean Academy of Nursing
• /
• v.37 no.4
• /
• pp.490-500
• /
• 2007

Purpose: The purpose of this study was to identify factors influencing the outcome of psychosocial rehabilitation for persons with chronic mental illness and to suggest a hypothetical model of psychosocial rehabilitation which is based on the relationship between influencing factors and then to test its fitness empirically. Method: Data was collected from persons with a chronic mental illness using a self-report questionnaire, and from their case managers using an observed rating questionnaire. A total of 220 cases were used in the final analysis, and a hypothetical model was verified through covariance structure analysis using LISREL. Result: 1) The fitness indices of the model were $X^2=133.77$ (df=48, p=.00), GFI=0.93, AGFI=0.87, RMR=2.32, NNFI=0.95 and NFI=0.95. Twelve paths among fifteen proved to be significant. 2) Psychosocial rehabilitation was influenced directly by symptoms, daily living skill and self-concept, and was influenced indirectly by the psychosocial rehabilitation program service. Psychosocial rehabilitation accounted for 32% of variance of these factors. Conclusion: This study is expected to contribute to understanding the psychosocial rehabilitation phenomena. Besides it will provide basic information for developing strategies of bio-psycho-sociological interventions and evaluations in regard to influential factors of psychosocial rehabilitation.

• Women's Health Nursing
• /
• v.12 no.2
• /
• pp.97-105
• /
• 2006

Purpose: The purpose of this study is to verify the effects of the Qigong training program on the anxiety and labor pains of primipara. Method: The research subjects were a total of 60 primipara who consulted a doctor regularly concerning their antenatal care. Among them, 30 people were the experimental group, and the other 30 people were the control group, and were selected as homogeneous with the experimental group. The degree of anxiety and labor pains were measured by State-Trait Anxiety Inventory(STAI) and Graphic Rating Scale(GRS). SPSS WIN 11.0 was used for data analysis. Obstetric and general characteristics between experimental and control groups, and a homogeneity test of state and trait anxiety were done by both $X^2$ test and t-test. The hypothesis testing was analyzed by ANCOVA with a covariate of pretest value. Result: The first hypothesis, 'Primipara who join the Qigong training program have lower anxiety than those who do not join' was supported (F=28.8, p<.000). The second hypothesis, 'Primipara who join the Qigong training program have lower labor pain than those who do not join' was unsupported. Conclusion: It was verified that the Qigong training program was effective in alleviating anxiety; however it did not have any effect on relieving labor pain, so more in-depth research is needed later on.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.5
• /
• pp.1-7
• /
• 2012

The transportation is almost dependent on a single fuel petroleum with transportation energy dilemma. Hybrid Electric Vehicle(HEV) technology holds more advantages on efficiency improvements for petroleum consumption at the transportation. And bearing is recognized as the important component of gearbox. Gearboxes for HEV transmission have been ensured the highest reliability over some years in withstanding high dynamic loads. At the same time, the demands of lightweight design and cost minimization are required by thought-out design, high-quality material, superior production quality and maintenance. In order to design a reliable and lightweight gearbox, it is necessary to analyze bearing rating life methods between standard and different bearing companies with calculation methods for modification factors. In this paper, the influence of life time of bearings will be pointed out. Bearing contact stress and load stress distribution of HEV gearbox are obtained and compared with Romaxdesigner and BearinX. And the unequal wear of the left bearing for the gearbox intermediate shaft is investigated between simulation and test.

• The Korean Nurse
• /
• v.31 no.5
• /
• pp.29-38
• /
• 1992

The purpose of this is to find the anxiety score of OHS pt's family and general surgery pt's family and to offer basic data. The subjects of this study were 80 : 40 were OHS pt's family in Seoul Hospital and remaining 40 were OS pt's family in Capital Hospital. The data was collected between March 1, through May 30, 1992. The instruments used for this study were Zung's The Self-Rating Anxiety Scale. The collected daLa were analyzed using percentage, descriptive statistics, $X^2-test$, t-test and Two-way Anova. The finding's were as followed: 1. Test of hypothesis "The anxiety score of the Ol-lS pt's family were similar to as pt's family" was rejected (L=0.772 P>.05) 2. The mean score of anxiety of the OHS pt's family was 1.772, The mean score of anxiety of the OS pt's family was 1,790. 3. The relationship between anxiety of the OHS pt's family and GS pt's family and family's age was significant (P<.Ol) and the relationship between anxiety and age interaction effect. (F=242.0 P<.01) In conclusion, the anxiety score of the OI-IS pt's finding and GS pt's family was all high.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.4
• /
• pp.25-30
• /
• 2012

The transportation is almost dependent on a single fuel petroleum with transportation energy dilemma. Hybrid Electric Vehicle(HEV) technology holds more advantages on efficiency improvements for petroleum consumption at the transportation. And bearing is recognized as the important component of gearbox. Gearboxes for HEV transmission have been ensured the highest reliability over some years in withstanding high dynamic loads. At the same time, the demands of lightweight design and cost minimization are required by thought-out design, high-quality material, superior production quality and maintenance. In order to design a reliable and lightweight gearbox, it is necessary to analyze bearing rating life methods between standard and different bearing companies with calculation methods for modification factors. In this paper, the influence of life time of bearings will be pointed out. Bearing contact stress and load stress distribution of HEV gearbox are obtained and compared with Romaxdesigner and BearinX. And the unequal wear of the left bearing for the gearbox intermediate shaft is investigated between simulation and test.