• The Transactions of the Korea Information Processing Society
• /
• v.1 no.1
• /
• pp.92-98
• /
• 1994

The hypercube-like interconncetion network,X-hypercubes,has the same number of nodes and edges as conventional hypercubes.By slightly changing the interconneton way between nodes,however,X-hypercubes reduces the diameter by almost half.Thus the communication delay in X-hypercubes can be expected to be much lower than that in hypercubes. This paper gives a new definition of X-hypercubes establishing clear-cut condition of connection between two nodes.As appliction examples of the new definition,this paper presents simple embeddings of hypercubes in X-hypercubes and vice versa.This means that any programs written for hypercubes can be transported onto X-hypercubes and vice versa with minimal overhead.This paper also present bitonic merge sort for X-hypercubes by simulation that for hypercubes.

• Korean Journal of Materials Research
• /
• v.11 no.10
• /
• pp.859-862
• /
• 2001

The crystal structure and magnetic properties of the $Ni_{1-x} Cd_xFeAlO_4$(0$\leq$x$\leq$0.5) have been investigated by means of X-ray diffractometry and Mossbauer spectroscopy. The samples($0\leq$x$\leq$0.5) have been prepared by the ceramic sintering method. The X-ray diffraction pattern shows that the crystal structure of the samples is a cubic spinel type. The lattice constant has been found by extrapolation using the Nelson- Riley function and it increases slightly from $8.321{\AA}$ to $8.410{\AA}$ with Cd concentration. The Mossbauer spectra for x<0.4 show a superposition of two sextets and a paramagnetic doublet at room temperature. The cation distribution for x=0 was determined to be $[Fe_{0.75}Al_{0.25}]^A[NiFe_{0.25}Al_{0.75}^BO_4$. The superparamagnetic doublet for x< 0.4 seems to be due to A1 ion in tetrahedral site by the superparamagnetic clustering effect.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.778-783
• /
• 2001

Turbine blade is subject to cyclic bending force by steam pressure. Stress analysis by fractography is already established technology as means for seeking cause of fracture and has been widely employed. In the X-ray fractography, plastic deformation and residual stress near the fracture surface can by determined and information of internal structure of material can be obtained. Therefore, to find a fracture mechanism of torsion-mounted blade in nuclear power plant, based on the information from the fracture surface obtained by fatigue test, the correlation of X-ray parameter and fracture mechanics parameter was determined and then the load applied to actual broken turbine blade was predicted.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.298-303
• /
• 2001

The critical thickness of an epitaxial film on a substrate in electronic or optoelectronic devices is studied on the basis of equilibrium dislocation analysis. Two geometric models, a single dislocation and an array of dislocations in heteroepitaxial system, are considered respectively to calculate the misfit dislocation formation energy. The isotropic linearly elastic stress fields for the models are obtained by means of complex potential method combined with alternating technique, and are used for calculating the formation energies. As a result, the effect of elastic mismatch between film and substrate on critical thickness is presented and $Si_xGe_{1-x}/Si$ epitaxial structure is analyzed to predict the critical thickness with varying germanium concentration.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.3
• /
• pp.121-126
• /
• 1988

The molecular interaction of $Mo_2(OR)_4({\mu}-OR)_2$$ unit has been studied for carbonyl and acetylene ligands by means of extended Huckel calculations. We have extended the extended Hckel calculations to unknown apex bridged $Mo_2(OR)_6({\mu}-X)$ complexes (X = $SO_2$H, and Cl) in order to compare the stability of the complexes. In the $C_2H_2$and H apex bridged complexes, one finds a relatively small HOMO-LUMO gap. However, both complexes are stabilized due to Jahn-Teller distortion. The stability of both complexes is comparable to that of $Mo_2(OR)_6(CO)$ complex. The comparisons and predictions in the stability of known and unknown complexes are the subject of this study.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1684-1688
• /
• 2005

In this paper, authentication technologies for X-ray inspection images in container merchandises are introduced and a method of authentication for X-ray inspection images is proposed. Until now, X-ray images of container merchandises have been managed without any authentication of inspection results and environments, it means that there was no any action for protection of illegal copy and counterfeiting of X-ray images from inspection results. Here, authentication identifies that who did inspect container X-ray images and, whether the container X-ray images were counterfeited or not. Our proposed algorithm indicates to put important information about X-ray inspection results on an X-ray image without affecting quality of the original image. Therefore, this paper will be useful in determining an appropriate technology and system specification for authentication of X-ray inspection images. As a result of experiment, we find that the information can be embedded to X-ray image without large degradation of image quality. Our proposed algorithm has high detection ratio by Quality 20 of JPEG attack.

• Korean Journal of Materials Research
• /
• v.15 no.6
• /
• pp.393-398
• /
• 2005

The crystal structure and magnetic properties of the $Mg_{1-x}Zn_xFeAlO_4\;(0{\leq}x\leq1.0)$ have been investigated by means of x-ray diffractometry and $M\ddot{o}ssbauer$ spectroscopy. The samples$(0{\leq}x\leq1.0)$ have been prepared by the ceramic sintering method. The x-ray diffraction pattern shows that the crystal structure of the samples is a cubic spinel type. The lattice constant has been found by extrapolation using the Nelson-Riley function and it increases slightly from $8.3496\AA\;to\;8.4128\AA$ with Zn concentration. The $M\ddot{o}ssbauer$ spectra for x<0.4 show a superposition of two sextets ana a paramagnetic doublet at room temperature. The superparamagnetic doublet for x<0.4 seems to be due to Al ion in tetrahedral site by the superparamagnetic clustering effect.

• Journal of Powder Materials
• /
• v.16 no.3
• /
• pp.196-202
• /
• 2009

A visible-light photoactive $TiO_{2-x}N_x$ photocatalyst was synthesized successfully by means of cogrinding of anatase-$TiO_2(a-TiO_2)$ in $NH_3$ ambient, followed by heat-treatment at $200^{\circ}C$ in air environment. In general, it is well known that the grinding-operation induces phase transformation of a-$TiO_2$ to rutile $TiO_2$. This study investigates the influence of the amount of $NH_3$ gas on the phase transformation rate of a-$TiO_2$ and enhancement of visible-light photocatalytic activity, and also examines the relation between the photocatalytic activity and the period of grinding time. The phase transformation rate of a-$TiO_2$ to rutile is retarded with the amount of NH3 injected. And the visible-light photocatalytic activity of samples, was more closely related to the period of grinding time than $NH_3$ amount injected, which means that the doping amount of nitrogen into $TiO_2$ more effective to mechanical energy than $NH_3$ amount injected. XRD, XPS, FT-IR, UV-vis, Specific surface area (SSA), NOx decomposition techniques are employed to verify above results more clearly.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.9
• /
• pp.89-98
• /
• 2014

A diagnostic fluoroscopy X-ray system uses a 32kW or greater X-ray generator for obtaining real-time moving images and high-resolution images. Fluoroscopy X-ray systems have to use a high-capacity AC power source to perform long-time low-power fluoroscopy and short-time high-power spot exposure. In this paper, we propose a hybrid type X-ray generator for fluoroscopy X-ray system which can perform fluoroscopy and spot exposure with a low-capacity AC power source and an energy storage device. The characteristics of energy storage devices are compared and each energy storage device is modelled to equivalent circuit. And the characteristics of available energy are analyzed as a function of output voltage and power. A 32kW class hybrid X-ray generator with EDLC as an energy storage device for fluoroscopy X-ray system was constructed, and its validity was verified by means of simulations and experiments.

• Korean Journal of Materials Research
• /
• v.9 no.8
• /
• pp.831-836
• /
• 1999

Magnetic properties of (Fe(sub)1-xCo(sub)x)(sub)89Zr11 amorphous films fabricated by RF sputtering method have been investigated as a function of Co content x. By means of two step field annealing at 190~20$0^{\circ}C$ for 10 minutes in the magnetic field of 130 Oe, the film with x=0.4 among the samples shows the superior soft magnetic properties in spite of showing the high magnetostriction. For example, the obtained properties of coercivity and differential permeability measured in an exciting field of 10 mOe at the frequency of 8.7 MHz are 0.25 Oe and 280, respectively. It is confirmed that such behavior is due to the variation of magnetic anisotropies caused by a optimal compressive stress within the film.