• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.3 s.174
• /
• pp.743-751
• /
• 2000

Because welding residual stress is formidable result in electric resistance spot welding process, and it detrimentally affect to fatigue crack initiation and growth at nugget edge of spot welded la p joints, it should be considered in fatigue analysis. Thus, accurate prediction of residual stress is very important. In this study, nonlinear finite element analysis on welding residual stress generated in process of the spot welding was conducted, and their results were compared with experimental data measured by X-ray diffraction method. By using their results, the maximum principal stress considered welding residual stress at nugget edge of the spot welded lap joint subjected to tension-shear load was calculated by superposition method. And, the $\Delta$P- $N_f$ relations obtained through fatigue, tests on the IB-type spot welded lap joints was systematically rearranged with the maximum principal stress considered welding residual stress. From the results, it was found th2at fatigue strength of the IB-type spot welded lap joints could be systematically and more reasonably rearranged by the maximum principal stress($\sigma$1max-res considered welding residual stress at nugget edge of the spot welding point.

• Journal of the Korea Concrete Institute
• /
• v.19 no.1
• /
• pp.121-130
• /
• 2007

To investigate the enhancement in strength and deformation capacities of concrete confined by FRP composites, tests under axial loads were carried out on three groups of thirty six short columns in circular section with diverse GFRP confining reinforcement. The major test variables considered include fiber content or orientation, wrap or tube type by varying the end loading condition, and continuous or discontinuous confinement depending on the presence of vortical spices between its two halves. The circumferential FRP strains at failure for different types of confinements were also investigated with emphasis. Various analytical models capable of predicting the ultimate strength and strain of the confined concrete were examined by comparing to observed results. Tests results showed that FRP wraps or tubes provide the substantial increase in strength and deformation, while partial wraps comprising the vertical discontinuities fail in an explosive manner with less increase in strength, particularly in deformation. A bilinear stress-strain response was observed throughout all tests with some variations of strain hardening. The failure hoop strains measured on the FRP surface were less than those obtained from the tensile coupons in all tests with a high degree of variation. In overall, existing predictive equations overestimated ultimate strengths and strains observed in present tests, with a much larger scatter related to the latter. For more accuracy, two simple design- oriented equations correlated with present tests are proposed. The strength equation was derived using the Mohr-Coulomb failure criterion, whereas the strain equation was based on entirely fitting of test data including the unconfined concrete strength as one of governing factors.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.20 no.1
• /
• pp.49-59
• /
• 1984

Optimizing investigation of characteristics of underwater welding by a gravity type arc welding process was experimentally carried out by using six types of domestic coated welding electrodes for welding of domestic marine structural steel plates (KR Grade A-1, SWS41A, SWS41B,) in order to develop the underwater welding techniques in practical use. Main results obtained are summarized as follows: 1. The absorption speed of the coating of domestic coated lime titania type welding-electrode became constant at about 60 minutes in water and it was about 0.18%/min during initial 8 minutes of absorption time. 2. Thus, the immediate welding electrode could be used in underwater welding for such a short time in comparison with the joint strength of in-atmosphere-and on-water-welding by dry-, wet-or immediate-welding-electrode. 3. By bead appearance and X-ray inspection, ilmenite, limetitania and high titanium oxide types of electrodes were found better for underwater-welding of 10 mm KR Grade A-1 steel plates, while proper welding angle, current and electrode diameter were 6$0^{\circ}C$, above 160A and 4mm respectively under 28cm/min of welding speed. 4. The weld metal tensile strength or proof stress of underwater-welded-joints has a quadratic relationship with the heat input, and the optimal heat input zone is about 13 to 15KJ/cm for 10mm SWS41A steel plates, resulting from consideration upon both joint efficiency of above-100% and recovery of impact strength and strain. Meanwhile, the optimal heat input zone resulting from tension-tension fatigue limit above the base metal's of SWS41A plates is 16 to 19KJ/cm. Reliability of all the empirical equations reveals 95% confidence level. 6. The microstructure of the underwater welds of SES41A welded in such a zone has no weld defects such as hydrogen brittleness with supreme high hardness, since the HAZ-bond boundary area adjacent to both surface and base metal has only Hv400 max with the microstructure of fine martensite, bainite, pearlite and small amount of ferrite.

• Journal of Sasang Constitutional Medicine
• /
• v.8 no.1
• /
• pp.377-393
• /
• 1996

Lumbago is the common disease in the human, many people have been sicked the Lumbago. As the traditional methods of Lumbago treatment, acupuncture, moxibustion, herb medicines have been applied to a patient, nowadays, new methods have been applied physical remedy, Yakchim (Korean herb acupuncture) remedy, Chuna remedy to. This report was collected 73 Lumbago patients by name, sex, age, motive, symptoms, X-ray, CT, MRI, lRCT, Sasang constitution type, Sasang herb medicine, Yakchim, Chuna, period of remedy, satisfaction of remedy, at the "WooRee Korean Medical Clinic" during 21 months from Sep. 14, 1994 to May 25, 1996. And this report was studied about the distribution of the Sasang constitution type, the Sasang herb medicine, the effect, the period. The results were as follows: 1. Lumbago patients were distributed like that; Taeum-ln (太陰人) 47 (66.3 %), Soyang-In 16 (21.9 %), Soum-In (13.7 %), Taeyang-In (太陽人) 0. This was different from distribution of Donguisuseibowon (東醫壽世保元), Taeum-In (太陰人) 50%, Soyang-In (少陽人) 30 %, Soum-In (少陰人) 20 %, Taeyang-In (太陽人) little, this report shows that the number of Taeum-In (太陰人) is more than that of Donguisuseibowon and the number of Soum-In is less than that of Donguisuseibowon. 2. The average satisfaction of remedy was 60.3 %, Taeum-In's satisfaction was 66.0 %, Soum-In's satisfaction was 56.3 %, Soyang-In's satisfaction was 60.0 %. 3. The effective herb medicines were as follows, Soyang-In used the Hyong Bang Ji Hwang Tang (荊防地黃湯), Yuk Mi Ji Hwang Tang (六味地黃樓), Soum-In used the Sib Yi Mi Goan Jung Tang (十二味寬中湯), Taeum-In used the Chung Sim Yon Ja Tang (淸心蓮子陽), Chung Pae Sa Gan Tang (淸師爾肝湯), Yeol Da Han So Tang (熱多寒少湯). 4. The period of remedy was about 6 weeks. The period of remedy of each types was as follows, Taeum-In was about 5.7 weeks, Soum-In was about 6.8 weeks, Soyang-In was about 4.2 weeks. 5. The method of Lumbago remedy is divided three types, sprain Lumbago, Pyobyong (表病 : outside Syndromes) Libyong (裡病 : inside symdromes). Soum-In's methods are Pyobyong's ascending the Yang (陽), adding the Gi (氣) [升陽益氣], and Libyong's descending the inside Yim (裡陰) [裡陰降氣], Soyang-In's methods are Pyobyongs's decending the outside-Yim [表陰降氣], and Libyong's ascending the cool Yang (濟陽) [淸陽上升]. Taeum-In's methods are Pyobyong's ascending the Lung's Yang (肺陽升氣), and Libyong's colding the dried hot liver (淸肝燥熱). Taeyang's methods are strong the liver and making Yim. (補r肝生陰) 6. There are two methods for using the YakChim (Korean herb-acupuncture) by Sasang constitution medicine, one is to select the Yakchim, the other is to choice the point for appling the Yakchim. The first, to select the Yakchim, the other is follows; Soum-In can select the bee Venom, Soyang-In can select the H.O. (Hong Whoa 紅花), Taeum-In can select the I (Hodo 胡挑), V, O.K. (Ungdarn, 薦膽), Uwhang 牛黃, Sa-Hyang 麝香, etc., Palgang Yakchim (eight principles Korean herb-acupuncture (八剛藥鐵)) could made by abstracted Sasang herb medicine. The second, to choice the points for applying the Yakchim are used in the TaeGiuk Acupuncture method (太梗針法), Sacho (四焦, four warmer) by Sasang constritutional physiology and pathology.