• Title/Summary/Keyword: X-밴드

Search Result 455, Processing Time 0.031 seconds

Characteristic Simulation of the High Temperature Superconducting Micostrip Bandpass Filters using $Y_1Ba_2Cu_3O_{7-x}$ Films ($Y_1Ba_2Cu_3O_{7-x}$ 박막을 이용한 Ku-밴드 HTS 마이크로스트립 대역통과 필터의 전산모사 특성)

  • Park, Kyung-Kuk;Chung, Dong-Chul;Lim, Sung-Hun;Yim, Seong-Woo;Jeong, Yong-Chae;Han, Byoung-Sung
    • Proceedings of the KIEE Conference
    • /
    • 1998.07d
    • /
    • pp.1332-1-1332-4
    • /
    • 1998
  • This paper described design and simulation of the high-Tc superconducting (HTS) microstrip bandpass filter (BPF) on MgO substrate using $Y_1Ba_2Cu_3O_{7-x}$ films that show superconductivity ${at \fallingdotseq}90$ K. Design parameters for the characteristic of the bandpass filter in Ku-band were obtained by approximate design formulas. It used parallel coupled stripline stepped impedance resonators (SIR). Microwave design system, MDS(EEsorf S/W) was used to derive the optimal pattern of the filters and to simulate frequency response. In computer-aided results, optimally designed HTS filters got good performance compared with the gold counter-parts on frequency response $S_{21}$, $S_{11}$.

  • PDF

A High Gain Corrugated Horn Antenna with Dielectric Lens (유전체 렌즈가 삽입된 고이득 Corrugated 혼 안테나)

  • Lee, Hojoo;Choi, Jaehoon
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.27 no.5
    • /
    • pp.486-489
    • /
    • 2016
  • A horn antenna with corrugation structure and a PTFE(Polytetrafluoroethylene) teflon(relative permittivity=2.1) dielectric lens for good impedance matching characteristic and high gain performance is proposed in this paper. The proposed antenna shows measured return loss below -25 dB over the operating X band(8~12 GHz), the peak gain of 22.3 dBi at the center frequency(10 GHz) and has overall size of $110mm{\times}110mm{\times}135mm$. Considering the performance of the proposed antenna, it is suitable for being inserted in a radar level transmitters, particularly for gas tanks on vessels or off-shore plants containing gas with very low reflectivity and relative permittivity such as LNG or LPG.

X-Band Oscillator Using SIW Cavity Resonator Based on Planar Circuit Technique (평면회로 기법에 의한 SIW Cavity 공진기를 이용한 X-밴드 발진기)

  • Lee, Hyun-Wook;Lee, Il-Woo;Nam, Hee;Lee, Jong-Chul
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.7 no.1
    • /
    • pp.68-74
    • /
    • 2008
  • The substrate integrated waveguide (SIW) structure can be approximated as the rectangular waveguide using common dielectric substrate with via-holes. To realize reflection-type resonator, $50-{\omega}$ microstrip line can be used for coupling with the center plane of the cavity. The oscillator is designed to operate at 9.45 GHz using the reflection-type SIW cavity resonator. The phase noise of oscillator shows -98.1dBc/Hz at 100 KHz offset. In experiment, the reflection type SIW cavity resonator improves the loaded quality factor making the low phase noise oscillator possible. Due to the entirely planar structure of this resonator, this technique can also be adequate in oscillator applications for a low cost and low phase noise performance.

  • PDF

A Hybrid Approach for Grid Artifacts Suppression in X-ray Image (X-ray 영상에서 그리드 아티팩트 제거를 위한 복합형 기법)

  • Kim, Hyewon;Kim, Kyongwoo;Kim, Hyunggyu;Jung, Joongeun;Park, Joonhyuk;Kim, Donghyun;Kim, Hojoon
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2019.10a
    • /
    • pp.907-910
    • /
    • 2019
  • 본 연구에서는 X-ray 영상에서 비산란 그리드 장치의 영향으로 인한 아티팩트를 제거하기 위하여 이산코사인변환(DCT: discrete cosine transform) 기반의 주파수 분석 기법과 딥러닝 네트워크의 학습 기법을 상호 보완적으로 결합하는 방법론을 제안한다. 피사체의 특성에 따라 다양하게 나타나는 그리드 라인의 억제 기능을 학습하기 위하여 서로 다른 특성을 반영하는 3 종류의 학습데이터를 생성한다. 학습에 사용되는 그리드 라인 영상의 타겟 데이터를 산출하기 위하여 DCT 기반의 밴드스톱 필터링 기법을 사용하였으며 학습데이터의 양적인 부족을 해결하기 위하여 패치 기반의 학습 방법을 적용하였다. 제안된 방법에 대해 기존의 방법과 비교하여 피사체 경계선 영역에서 발생하는 성능저하 현상, 분할의 가장자리에서 발생하는 블로킹 현상, 배경 영상에서의 성능저하 현상 등을 상대적으로 개선할 수 있음을 실험적으로 평가하였다.

Analysis of Landslide locations using Spectral Reflectance of Clay Mineral and ASTER Satellite Image (점토광물의 분광반사율 및 ASTER 위성영상을 이용한 산사태 발생지역 분석)

  • Nam, Koung-Hoon;Lee, Hong-Jin;Jeong, Gyo-Cheol
    • The Journal of Engineering Geology
    • /
    • v.24 no.3
    • /
    • pp.411-421
    • /
    • 2014
  • The purpose of this study is to analyze the key factors that contribute to landslide causes through swelling clay minerals and terrain analysis in landslide sites taken place of in Yongin city, Gyeonggi-do, 2011. The study was conducted based on field survey by XRD (X-ray Diffraction), XRF (X-ray fluorescence), spectroscopic analysis on soil samples obtained from landslide sites and ASTER satellite image. Illite shows absorption features; $Fe^{2+}$ and $Fe^{3+}$ at 0.9 and $1.0{\mu}m$, broad water absorption features near 1.4 and $1.9{\mu}m$, and additional Al-hydroxyl features at 2.2, 2.3 and $2.4{\mu}m$, respectively. These absorption features are consistent with the bands 5, 6, and 7 of ASTER (Advanced Spaceborne Thermal Emission and Reflection Radiometer) satellite image. Illite image was extracted using band math of $SWIR_{Illite}$. From these results, we confirmed the applicability of ASTER satellite image using identification of swelling clay minerals to landslide study.

Growth of ZnS nanocluster thin films by growth technique and investigation of structural and optical properties (용액성장법(Solution growth technique)에 의한 ZnS nano 입자 박막성장 및 구조적, 광학적 특성)

  • 이종원;임상철;곽만석;박인용;김선태;최용대
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.10 no.3
    • /
    • pp.199-204
    • /
    • 2000
  • In this study, the ZnS nanosized thin films that could be used for fabrication of blue light-emitting diodes, electro-optic modulators, and n-window layers of solar cells were grown by the solution growth technique (SGT), and their structural and optical properties were examined. Based on these results, the quantum size effects of ZnS were systematically investigated. Governing factors related to the growth condition were the concentration of precursor solution, growth temperature, concentration of aq. ammonia, and growth duration. X-ray diffraction patterns showed that the ZnS thin film obtained in this study had the cubic structure ($\beta$-ZnS). When the growth temperature was $75^{\circ}C$, the surface morphology and the grain size uniformity were the best. The energy band gaps of samples were determined from the optical transmittance valued, and were shown to vary from 3.69 eV to 3.91 eV. These values were substantially higher than 3.65 eV of bulk ZnS, demonstrating that the quantum size effect of SGT grown ZnS is remarkable. Photoluminescence (PL) peaks were observed at the positions corresponding to the lower energy than that to energy band gap, illustrating that the surface states were induced by the ultra-fineness of grains in ZnS films. Particularly, for the first time, it is reported for the SGT grown ZnS that the PL peaks were shifted depending on the grain size.

  • PDF

Preliminary Analysis of Intensive Observation Data Produced by the National Center for Intensive Observation of Severe Weathers (NCIO) in 2002 (2002년 국가 악기상 집중관측센터에서 생산된 집중관측자료의 분석 및 활용)

  • Kim, Baek-Jo;Cho, Chun-Ho;Nam, Jae-Cheol;Chung, Hyo-Sang;Kim, Jeong-Hoon
    • Atmosphere
    • /
    • v.13 no.4
    • /
    • pp.57-70
    • /
    • 2003
  • The National Center for Intensive Observation of Severe Weathers (NCIO) as a part of METRI's principal project "Korea Enhanced Observing Period; KEOP" was established at Haenam Weather Observatory in order to effectively monitor and observe heavy rainfall in summer, which is essential for the identification of the structure and evolution mechanism of mesoscale severe weather system. The intensive field-based experiments in 2002 within southwestern Korea toward various meteorological phenomena ranging from heavy rainfall to snowfall were conducted in collaboration with KMA(Korea Meteorological Administration) and universities. In this study, preliminary analysis results using intensive observation data obtained from these experiments are presented together with the introduction of NCIO and its operational structure.

Spectroscopic Characteristics of Ruby from Gorno-Badakhshan, Tajikistan (타지키스탄 고르노바다흐샨주 지역 루비에 대한 분광학적 특성 연구)

  • Chung, Sol Lim;Park, Jong Wan
    • The Journal of the Petrological Society of Korea
    • /
    • v.22 no.1
    • /
    • pp.1-8
    • /
    • 2013
  • Physical properties, XRF, UV-Vis, FTIR studies were carried out in order to characterize gemological features of ruby from Tajikistan. Fluorescence reaction of the Tajikistan ruby to short wave ultraviolet was moderate to very strong in red and long wave ultraviolet rays was weakly detected. UV-visible analysis strong absorption bands at 468.5, 475, 476.5 nm and broaden bands at 550 nm were observed for ruby due to $Cr^{3+}$. According to FT-IR analysis, all rubies from Tajikistan showed the similar patterns and kaolinite peaks at 3500, 3617, 3630, $3677cm^{-1}$ and boehmite broaden absorption bands at 3085 and $3320cm^{-1}$. Inclusions in Tajikistan ruby are observed solid inclusions, negative crystals, needle and silk inclusions. These distinctive characteristics mentioned above can be used to identify the locality and source of ruby stones from Tajikistan.

Investigation of the luminescence properties of ZnO nanostructures (ZnO 나노 구조의 형상에 따른 발광 특성에 관한 연구)

  • Jung, Mi-Na;Ha, Seon-Yeo;Park, Seung-Hwan;Yang, Min;Kim, Hong-Seung;Lee, Uk-Hyeon;Yao, Takafumi;Chang, Ji-Ho
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • v.9 no.1
    • /
    • pp.1013-1016
    • /
    • 2005
  • ZnO nanostructure was fabricated by catalyst-free method using Zn powder in air. The growth temperature was controlled from 450$^{\circ}$C to 600$^{\circ}$C, and the structural and optical properties were investigated by scanning electron microscopy (SEM), photoluminescence (PL), energy dispersive X-ray spectroscopy (EDX) and cathodoluminescence (CL). From all samples both ZnO tetrapods and clusters were observed. No significant dispersion was observed from the ZnO tetrapods, however, ZnO clusters show considerable change in density and size. From the EDX results, atomic composition difference was found. The clusters have O-deficiencies, while tetrapods have stoichiometric composition. Strong luminescence was observed at room temperature. From room temperature PL, UV emission at 380 nm and green emission at 500 nm were observed, and the intensity ratio ($I_{uv}/I_{green}$) increased as growth temperature increases. CL measurements show that the UV emission is closely related with tetrapods and the green emission is dominated from the clusters.

  • PDF

Fabrication and characterization of the 0.25 ${\mu}m$ T-shaped gate P-HEMT and its application for MMIC low noise amplifier (0.25 ${\mu}m$ T형 게이트 P-HEMT 제작 및 특성 평가와 MMIC 저잡음 증폭기에 응용)

  • Kim, Byung-Gyu;Kim, Young-Jin;Jeong, Yoon-Ha
    • Journal of the Korean Institute of Telematics and Electronics D
    • /
    • v.36D no.1
    • /
    • pp.38-46
    • /
    • 1999
  • o.25${\mu}m$ T-shaped gate P-HEMT is fabricated and used for design of X0band three stage monolithic microwave integrated circuit(MMIC) low noise amplifier(LNA). The fabricated P-HEMT exhibits an extrinsis transconductance of 400mS/mm and a drain current of 400mA/mm. The RF and noise characteristics show that the current gain cut off frequency is 65GHz and minimum noise figure(NFmin) of 0.7dB with an associated gain of 14.8dB at 9GHz. In the design of the three stage LNA, we have used the inductive series feedback circuit topology with the short stub. The effects of series feedback to the noise figure, the gain, and the stability have been investigated to find the optimal short stub length. The designed three staage LNA showed a gain of above 33dB, a noise figure of under 1.2dB, and ainput/output return loss of under 15dB and 14dB, respectively. The results show that the fabricated P-HEMT is very suitable for a X-band LNA with high gain.

  • PDF