• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.136-136
• /
• 2019

원형 실린더를 주변 흐름에 관한 연구는 오랜 기간 유체역학 전 영역에서 모형실험이나 수치모형으로 광범위하게 연구되었다. 이 흐름은 하천의 교각이나, 바다의 시추선과 같은 수공구조물 주변에서 관측된다. 난류와 와류가 공존하는 복잡한 특성 때문에, 이 흐름은 수공학에서 유사이송, 세굴, 오염물 확산 등에 영향을 준다. 본 연구는 실험실 수로에 설치된 원형 실린더(D=9cm) 후방의 근접 와류 구간에서(x/D<5) 유속을 ADV로 측정한 후, 난류 특성을 Power Spectral Estimation(PSE)와 Singular Spectral Analysis(SSA) 방법으로 연구하였다. PSE는 샘플 스펙트럼의 한계를 보완하고자 자료를 분할하고, window 함수를 적용하여 ensemble 평균을 구하는 경험적 방법이다. PSE를 이용하여 스펙트럼을 계산한 결과, 주 흐름 및 횡방향 흐름은 Inertial subrange에서 Kolmogorov의 가정과 일치하는 추세를 보였다. 그러나 수심방향 흐름의 스펙트럼은 -5/3보다 빠르게 감소하는 추세를 보였다. Inertial subrange 스펙트럼에서 난류 에너지 소산율은 원형 실린더에서 멀어짐에 따라 감소하는 추세를 보였고, 주 흐름방향과 횡방향 흐름은 비슷한 크기를 보였다. 난류 에너지 소산율과 동점성계수를 이용하여 Kolmogorov 길이, 유속, 시간 스케일을 계산했다. 난류의 운동에너지를 계산하기 위해 Triple decomposition 방법 중 하나인 SSA를 적용하였다. SSA는 유속행렬을 이용하여 고윳값과 고유벡터를 계산하고, 유속에서 기여도가 큰 부분을 추출하는 방법이다. SSA를 통해 실린더 후방 흐름에서 와류 성분과 난류 성분을 나누었다. 횡방향 흐름은 강한 와류로 큰 기여도를 갖는 고유벡터가 나타났지만, 주 흐름과 수심방향 흐름은 상대적으로 낮은 기여도를 갖는 고유벡터가 나타났다. 와류를 제외한 흐름에서 난류 운동에너지는 실린더와 멀어짐에 따라 감소하고, 흐름 중앙에서(y/D=0) 가장 큰 값을 보였다.

• Korean Journal of Remote Sensing
• /
• v.35 no.1
• /
• pp.29-37
• /
• 2019

Synthetic Aperture Radar (SAR) observations are powerful tools to monitor surface's displacement very accurately, induced by earthquake, volcano, ground subsidence, glacier movement, etc. Especially, radar interferometry (InSAR) which utilizes phase information related to distance from sensor to target, can generate displacement map in line-of-sight direction with accuracy of a few cm or mm. Due to decorrelation effect, however, degradation of coherence in the InSAR application often prohibit from construction of differential interferogram. Offset tracking method is an alternative approach to make a two-dimensional displacement map using intensity information instead of the phase. However, there is limitation in that the offset tracking requires very intensive computation power and time. In this paper, efficiency of parallel computing has been investigated using high performance computer for estimation of glacier velocity. Two TanDEM-X SAR observations which were acquired on September 15, 2013 and September 26, 2013 over the Narsap Sermia in Southwestern Greenland were collected. Atotal of 56 of 2.4 GHz Intel Xeon processors(28 physical processors with hyperthreading) by operating with linux environment were utilized. The Gamma software was used for application of offset tracking by adjustment of the number of processors for the OpenMP parallel computing. The processing times of the offset tracking at the 256 by 256 pixels of window patch size at single and 56 cores are; 26,344 sec and 2,055 sec, respectively. It is impressive that the processing time could be reduced significantly about thirteen times (12.81) at the 56 cores usage. However, the parallel computing using all the processors prevent other background operations or functions. Except the offset tracking processing, optimum number of processors need to be evaluated for computing efficiency.

• Journal of the Korea Convergence Society
• /
• v.12 no.8
• /
• pp.369-379
• /
• 2021

This study was a descriptive survey study to compare the stress, depression, fatigue, and sleep quality between pregnant women with gestational diabetes mellitus (GDM) and normal pregnant women. The study subjects were 49 gestational diabetes mellitus women and 51 normal pregnant women who were matching with gestational diabetes mellitus women by age, gestational age and number of births. The data collection was measured using structured questionnaires, numerical scales, and Canopy9 RSA(IEMBIO, Gangwondo, Korea) equipment. As a result of the study, pregnant women with gestational diabetes had higher pre-pregnancy weight(t=3.698, p<.001) and higher stress(t=4.505, p<.001), depression(t=4.564, p<.001), and fatigue(t=3.709, p<.001) during pregnancy, so weight management is important before pregnancy, and stress, fatigue, and depression relief nursing

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.32 no.2
• /
• pp.213-225
• /
• 2022

Containerization, a lightweight virtualization technology, enables agile deployments of enterprise-scale microservices in modern cloud environments. However, containerization also opens a new window for adversaries who aim to disrupt the cloud environments. Since microservices are composed of multiple containers connected through a virtual network, a single compromised container can carry out network-level attacks to hijack its neighboring containers. While existing solutions protect containers against such attacks by using network access controls, they still have severe limitations in terms of performance. More specifically, they significantly degrade network performance when processing packet payloads for L7 access controls (e.g., HTTP). To address this problem, we present BPFast, an eBPF/XDP-based payload inspection system for containers. BPFast inspects headers and payloads of packets at a kernel-level without any user-level components. We evaluate a prototype of BPFast on a Kubernetes environment. Our results show that BPFast outperforms state-of-the-art solutions by up to 7x in network latency and throughput.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.4
• /
• pp.547-552
• /
• 2022

In this study, we secured a technology for manufacturing expanded glass of uniform quality by using general tempered glass, that is, window glass, among automotive glass that is scrapped, and verified whether the manufactured expanded glass can be used for lithium battery fire suppression. The process of manufacturing expanded glass using waste glass is generally divided into Crushing → Milling → Granulation → Expansion → Cooling. With several trials a nd errors. It is obtained a yield of 0.5 ø mm to 2 ø mm spherical particles of 80 % or more. By comparing the surface analysis and physical properties, a more suitable sample was selected as a fire extinguishing agent for lithium batteries, and it was confirmed that the result of the adaptability test for lithium battery fire was satisfactory.

• Journal of Korean Clinical Nursing Research
• /
• v.16 no.1
• /
• pp.39-49
• /
• 2010

Purpose: The purpose of this study was to identify the effects of walking on discomfort and colon cleansing for patients having a colon lavage solution before colonoscopy. Methods: This study was a nonequivalent control group post test design. The participants were 89 patients (experimental group: 47, control group: 42) who underwent colonoscopy at G hospital in Incheon. The two groups put on step counter for an hour while taking the colon lavage solution. The experimental group was made up of patients who walked over 3,000 steps and the control group of those who walked less than 3,000 steps. Discomfort was measured using VAS and colon cleansing was measured by a specialist. Collected data were analyzed using $x^2-test$, t-test with SPSS/PC+ window version 15.0. Results: Walking while taking the colon lavage solution decreases abdominal pain before colonoscopy. Also one hour after taking the colon lavage solution, decreased nausea, abdominal pain and discomfort were found in the group which walked over 3,000 steps. Concluson: Based on the above findings, adequate walking can be used as a nursing intervention to increase comfort in patients undergoing colonoscopy.

• Journal of Powder Materials
• /
• v.30 no.2
• /
• pp.107-115
• /
• 2023

Li_1.3Al_0.3Ti_1.7(PO₄)₃(LATP) is considered a promising material for all-solid-state lithium batteries owing to its high moisture stability, wide potential window (~6 V), and relatively high ion conductivity (10^-3-10^-4 S/cm). Solid electrolytes based on LATP are manufactured via sintering, using LATP powder as the starting material. The properties of the starting materials depend on the synthesis conditions, which affect the microstructure and ionic conductivity of the solid electrolytes. In this study, we synthesize the LATP powder using sol-gel and co-precipitation methods and characterize the physical properties of powder, such as size, shape, and crystallinity. In addition, we have prepared a disc-shaped LATP solid electrolyte using LATP powder as the starting material. In addition, X-ray diffraction, scanning electron microscopy, and electrochemical impedance spectroscopic measurements are conducted to analyze the grain size, microstructures, and ion conduction properties. These results indicate that the synthesis conditions of the powder are a crucial factor in creating microstructures and affecting the conduction properties of lithium ions in solid electrolytes.

• The Journal of the Korea Contents Association
• /
• v.9 no.11
• /
• pp.432-442
• /
• 2009

This research had a look at what effect of the pursing benefit has on satisfaction, behavioral intention, and attitude of the visitors to the Gwangju Biennale. The survey was conducted for 320 visitors who finished their exhibition viewing schedule starting September 5 until September 19 [15 days]. 300 questionnaires excepting 20 unfaithfully responded copies among those collected from the surveyed were used for the analysis. As for the statistical disposal of the collected data, after going through the process of Data Coding, this research conducted an frequency analysis using SPSS 12.0 for window & statistics package program AMOS 5.0, an exploratory factor analysis to test the reliability and feasibility of the data, and reliability test of each factor; then, this research tested a hypothesis using structural equation model. The research results are as follows: First, as a result of factor analysis of the 15 pursuing benefits, 4 factors were elicited, such as pursuit of an intellectual experience, pursuit of a novel, exotic experience, pursuit of interpersonal, cultural exchange, and pursuit of internal fullness, etc.; as a result of factor analysis of the 10 attitudes, three factors were elicited, such as affective, cognitive, behavioral factors; as a result of factor analysis of 12 types of satisfaction, two factors, such as satisfaction with facilities and convenience matters, etc. were elicited. Second, as a result of the suitability of research model, suitability, its fidelity came out as $x^2=107.508$, d.f.=48, p=.000, Q=2.240, GFI=.942, AGFI=.906, RMR=.024, NFI=.952, TLI=.963, CFI=.973, RMSEA=.064. Third, pursuing benefit was found out to have a positive effect on satisfaction, attitude, and behavioral intention. Fourth, attitude was found out to have a positive significant effect on satisfaction. Fifth, attitude was found out to have a positive effect on behavioral intention. Sixth, satisfaction was found out to have a positive effect on behavioral intention.

• Applied Chemistry for Engineering
• /
• v.10 no.4
• /
• pp.557-562
• /
• 1999

The reaction properties of Pd. Pd-Ce and Pd-La catalysts supported on ${\gamma}-Al_2O_3$ were investigated in the oxidation reaction of methane($CH_4$) exhausted from the compressed natural gas vehicle in a U-tube flow reactor with gas hourly space velocity of $72,000h^{-1}$. The catalysts were characterized by X-ray diffraction(XRD), X-ray photoelectron spectroscopy(XPS), BET surface area and hydrogen chemisorption. Pd catalyst prepared by $Pd(NO_3)_2$ as a palladium precursor and calcined at $600^{\circ}C$ showed the highest activity for a methane oxidation. Catalytic activity of calcined $Pd/{\gamma}-Al_2O_3$ in which most of palladium was converted into palladium oxide species was higher than that of reduced $Pd/{\gamma}-Al_2O_3$ in which most of palladium existed in palladium metal by XRD. As increasing the number of reaction cycles in the wide range of redox, the catalytic activity of $Pd/{\gamma}-Al_2O_3$ was decreased and the highly active window became narrower. Lanthanum oxide promoted Pd catalyst, $Pd/La/{\gamma}-Al_2O_3$ showed enhanced thermal stability compared with $Pd/{\gamma}-Al_2O_3$ even after aging at $1000^{\circ}C$, which was ascribed to the role of La as a promoter to suppress the sintering of palladium metal and ${\gamma}-Al_2O_3$ support. Almost all of methane was removed by the reaction with NO at the redox ratio of 1.2 in case of oxygen excluded steam, but that activity was significantly decreased in the steam containing oxygen.

• The Journal of Korean Society for Radiation Therapy
• /
• v.17 no.1
• /
• pp.19-31
• /
• 2005

Purpose : To supply the information of EPID system and to analyze the possibility of substitution EPID for film dosimetry. Materials & Methods : With amorphous silicon(aSi) type EPID and liquid filled lonization chamber(LC) type EPID, the reproducibility according to focus detector distance(FDD) change and gantry rotation was analyzed, and also the possible range of image acquisition was analyzed with Alderson Rando phantom. The resolution and the contrast of aSi type EPID image were analyzed through Las Vegas phantom and water phantom. DMLC image was analyzed with X-Omat V film and EPID to see wether it could be applied to the qualify assurance(QA) of IMRT. Results : The reproducibility of FDD position was within 1mm, but the reproducibility of gantry rotation was ${\pm}2,\;{\pm}3mm$ respectively. The resolution and the contrast of EPID image were affected by dose rate, image acquisition time, image acquisition method and frame number. According to the possible range of image acquisition of EPID, it is verified that the EPID is easier to use than film. There is no difference between X-Omat V film and EPID images for the QA of IMRT. Conclusion : Through various evaluation, we could obtain lots of useful information about the EPID. Because the EPID has digital data, also we found that the EPID is more useful than film dosimerty for the periodical Qualify Assurance of IMRT. Especially when it is difficult to do point dose measurement with diode or ionization chamber, the EPID could be very useful substitute. And we found that the diode and ionization chamber are difficult to evaluate the sliding window images of IMRT, but the EPID was more useful to do it.