• Title/Summary/Keyword: Wu model

Search Result 821, Processing Time 0.036 seconds

Discussion on Spatio-temporal Modeling

  • Tingting, Mao;Yu, Liu;Baojia, Lin;Lun, Wu
    • Proceedings of the KSRS Conference
    • /
    • 2003.11a
    • /
    • pp.178-181
    • /
    • 2003
  • The temporal GIS data modeling methods are discussed in this paper. At first, two conceptual models of spatio-temporal data are introduced, and then some typical STDMs based on these two models are summed up and compared. After that, the spatio-temporal changes are analyzed thoroughly, and then how to model spatio -temporal data from different aspects is discussed. At last, several issues that need further research are pointed out.

  • PDF

Experimental study on reinforced high-strength concrete short columns confined with AFRP sheets

  • Wu, Han-Liang;Wang, Yuan-Feng
    • Steel and Composite Structures
    • /
    • v.10 no.6
    • /
    • pp.501-516
    • /
    • 2010
  • This paper is aiming to study the performances of reinforced high-strength concrete (HSC) short columns confined with aramid fibre-reinforced polymer (AFRP) sheets. An experimental program, which involved 45 confined columns and nine unconfined columns, was carried out in this study. All the columns were circular in cross section and tested under axial compressive load. The considered parameters included the concrete strength, amount of AFRP layers, and ratio of hoop reinforcements. Based on the experimental results, a prediction model for the axial stress-strain curves of the confined columns was proposed. It was observed from the experiment that there was a great increment in the compressive strength of the columns when the amount of AFRP layers increases, similar as the ultimate strain. However, these increments were reduced as the concrete strength increasing. Comparisons with other existing prediction models present that the proposed model can provide more accurate predictions.

How to Establish Acute Myeloid Leukemia Xenograft Models Using Immunodeficient Mice

  • Shan, Wu-Lin;Ma, Xiao-Ling
    • Asian Pacific Journal of Cancer Prevention
    • /
    • v.14 no.12
    • /
    • pp.7057-7063
    • /
    • 2013
  • The discovery of the immunodeficient mice has provided a tool for establishing animal models as hosts for in vivo analysis of AML. Various model systems have been established in the last few decades, and it is essential that murine AML models are developed to exploit more specific, targeted therapeutics. In this review, we concentrate on the models of AML and discuss the development of immunodeficiency models for understanding of leukemogenesis, describe those now available and their values and document the methods used for establishing and identifying AML mice models, as well as factors influencing engraftment of human AML in immunodeficient mice. Thus, the function of this article is to provide clinicians and experimentalists with a chronological, comprehensive appraisal of all AML model systems.

Effect of Latex Particle Morphology on the Film Formation and Film Properties of Acrylic Coatings (III);Film Properties of Model Composite Latex (라텍스 입자구조가 필름형성 및 필름물성에 미치는 영향 (III);모델 복합라텍스 입자의 필름물성)

  • Ju, In-Ho;Byeon, Ja-Hun;Wu, Jong-Pyo
    • Journal of the Korean Applied Science and Technology
    • /
    • v.21 no.3
    • /
    • pp.259-266
    • /
    • 2004
  • Film properties of monodispersed model composite latexes with particle size of 190 nm, which consist of n-butyl acrylate as a soft phase monomer and methyl methacrylate as a hard phase monomer with different morphology was examined. Five different types of model latexes were used in this study such as random copolymer particle, soft-core/hard-shell particle, hard-core/soft-shell particle, gradient type particle, and mixed type particle. Tensile strength and tensile elongation at break of final films were evaluated. Those properties can be interpreted in terms of PBA/PMMA phase ratio and their morphology. The interfacial adhesion strength was also evaluated using $180^{\circ}$ peel strength measurement and cross hatch cutting test.

Robot manipulator's contact tasks on uncertain flexible objects

  • Wu, Jianqing;Luo, Zhiwei;Yamakita Masaki;Ito, Koji
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 1995.10a
    • /
    • pp.460-463
    • /
    • 1995
  • The present paper studies a robot manipulator's contact tasks on the uncertain flexible objects. The flexible object's distributed parameter model is approximated into a lumped "position state-varying" model. By using the well-known nonlinear feedback compensation, the robot's control space is decomposed into the position control subspace and the object's torque control subspace. The optimal state feedback is designed for the position loop, and the robot's contact force is controlled through controlling the resultant torque on the object using model-reference simple adaptive control. Experiments of a PUMA robot interacting with an aluminum plate show the effectiveness of this control approach. approach.

  • PDF

A Study on the Probabilistic Reliability Evaluation of Power System Considering Wind Turbine Generators with A simplified Multi-state Model (간략화한 다개상태 모델을 갖는 풍력발전계통을 고려한 전력계통의 신뢰도평가에 관한 기초연구)

  • Wu, Liang;Park, Jeong-Je;Choi, Jae-Seok
    • Proceedings of the KIEE Conference
    • /
    • 2008.07a
    • /
    • pp.271-272
    • /
    • 2008
  • Renewable energy resources such as wind, wave, solar, micro hydro, tidal and biomass etc are becoming important stage by stage, considering the effect of environment. Wind energy is one of the most successful sources of renewable energy for the production of electrical energy. What's more, due to wind speed random variation the wind turbine generators can not make two-state model as conventional generators. The method of obtaining reliability evaluation indices of wind turbine generators is different from the conventional generators. This paper presents a study on the reliability evaluation of power system considering wind turbine generators with a simplified multi-state model.

  • PDF

An Improvement on Estimation for Causal Models of Categorical Variables of Abilities and Task Performance

  • Kim, Sung-Ho
    • Communications for Statistical Applications and Methods
    • /
    • v.7 no.1
    • /
    • pp.65-86
    • /
    • 2000
  • The estimates from an EM when it is applied to a large causal model of 10 or more categorical variables are often subject to the initial values for the estimates. This phenomenon becomes more serious as the model structure becomes more serious as the model structure becomes more complicated involving more variables. In this regard Wu(1983) recommends among others that EMs are implemented several times with different sets of initial values to obtain more appropriate estimates. in this paper a new approach for initial values is proposed. The main idea is that we use initials that are calibrated to data. A simulation result strongly indicates that the calibrated initials give rise to the estimates that are far closer to the true values than the initials that are not calibrated.

  • PDF

An Efficient Identity-Based Deniable Authenticated Encryption Scheme

  • Wu, Weifeng;Li, Fagen
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.9 no.5
    • /
    • pp.1904-1919
    • /
    • 2015
  • Deniable authentication protocol allows a sender to deny his/her involvement after the protocol run and a receiver can identify the true source of a given message. Meanwhile, the receiver has no ability to convince any third party of the fact that the message was sent by the specific sender. However, most of the proposed protocols didn't achieve confidentiality of the transmitted message. But, in some special application scenarios such as e-mail system, electronic voting and Internet negotiations, not only the property of deniable authentication but also message confidentiality are needed. To settle this problem, in this paper, we present a non-interactive identity-based deniable authenticated encryption (IBDAE) scheme using pairings. We give the security model and formal proof of the presented IBDAE scheme in the random oracle model under bilinear Diffie-Hellman (BDH) assumption.

Pseudo Strain Hardening Model of Ultra High Strength Concrete under Axial Tensile Loading (초고강도 콘크리트의 인장파괴역학의 모델)

  • Han, Sang-Mook;Wu, Xiang-Guo;Choi, In-Sik;Kang, Su-Tae
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 2006.11a
    • /
    • pp.937-940
    • /
    • 2006
  • According to the analysis of tension failure mechanism of UHSC specimen, one modified model based on ACK model by the introduction of partial debonding energy of non-first cracks and by the application of steel fiber number on unit area is presented in this paper. It can be used to explain the evolution mechanism of multiple cracking and pseudo strain hardening of UHSC. From the numerical results, to increase steel fiber length and to reduce steel fiber diameter in some region all can reduce the fiber volume fraction with the same multiple cracks for economic design of UHSC.

  • PDF

Dynamic response of pipe pile embedded in layered visco-elastic media with radial inhomogeneity under vertical excitation

  • Cui, Chun Y.;Meng, Kun;Wu, Ya J.;Chapman, David;Liang, Zhi M.
    • Geomechanics and Engineering
    • /
    • v.16 no.6
    • /
    • pp.609-618
    • /
    • 2018
  • A new mechanical model for predicting the vibration of a pipe pile embedded in longitudinally layered visco-elastic media with radial inhomogeneity is proposed by extending Novak's plain-strain model and complex stiffness method to consider viscous-type damping. The analytical solutions for the dynamic impedance, the velocity admittance and the reflected signal of wave velocity at the pile head are also derived and subsequently verified by comparison with existing solutions. An extensive parametric analysis is further performed to examine the effects of shear modulus, viscous damping coefficient, coefficient of disturbance degree, weakening or strengthening range of surrounding soil and longitudinal soft or hard interbedded layer on the velocity admittance and the reflected signal of wave velocity at the pile head. It is demonstrated that the proposed model and the obtained solutions provide extensive possibilities for practical application compared with previous related studies.