• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2005년도 춘계학술대회
• /
• pp.279-290
• /
• 2005

The purpose of this study is to attempt a Analysis of a pointed-end Equipment Arm Safety-Accident for Fault Tree Analysis. Three major techniques were used first problem is Z-Model by which accident Analysis & prevention of a pointed-end Industry can be made, Fault Tree Analysis(FTA) bywhich quantification of a pointed-end Equipment accident Analysis can be made it 5 years in past and the third, manual-written by which minimal cut set to accident can be Identified. A example has been made of issue point a pointed-end Equipment that the Arm in loader happen to Injuries. According to the Analysis lack of safety knowledge, unsafety-behavior seem to be the primal cause of accident. Comparision of the accident cause to actual report demonstratesthat the FTA a efficient tool for Industrial Accident prevention.

• 한국기계가공학회지
• /
• 제10권2호
• /
• pp.52-60
• /
• 2011

Korea is the best country for ship-building. But nowadays, the speedboat and yacht are not mostly developed yet. For the sleek lines of ship, more innovative transmission system should be obtained in the ship industry. In general, marine transmissions often use the straight shafts and the helical gears. So it makes problem that engine-room requires large space. In this case, conical gear is the best solution for this. Until now, technology of conical gear is not generalized, but it will be increased more through many applications. So, in order to get conical gear design technology by ourselves, this thesis is conducted. This paper was written to gain useful information of marine gearbox design applied conical gear through the measurement of backlash, computer analysis and tooth contact test of helical conical involute gear pairs.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2005년도 춘계학술발표대회 논문집
• /
• pp.75-78
• /
• 2005

In according to the rising rate of divorce, single parent family has increased rapidly. And the number of single mother families is up to 80% of total single parent families. Especially the residential problem of low-income single mother families has been issue in social scope. But now facilities to accept these families are too short in Korea. Therefore this study aims for basic analysis of short-term residential facilities for single mother family. The survey of written documents and investigation of existing facilities are used by the method of study. In addition relief and rehabilitation facilities for mother and child in Seoul is analyzed by domestic example because of similarity to the model of this study.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 D
• /
• pp.2115-2117
• /
• 2003

This paper is study on internet based wireless remote control and monitoring for the system to purify water. Environment of the water quality grew worse. Therefore we require the effective system to purify water. Now national internet based wireless remote control and monitoring make a sensation and are a problem to be solved. This paper demonstrate internet based wireless remote control and monitoring for the system to purify water. This system including on server and many client distributed in whole country. The server is collecting information from the client. This information is then written inside database. The database is dealing with website and server and client.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.326-328
• /
• 1996

The 10kW or 1MW model of a photovoltaic array written in PSPICE is presented in this paper. A problem with this large scale centralized photovoltaic system is the decrease of power due to the resistance of cable connecting individual subarray with inverter. In this paper, we analyzed the relationship between the resistance of cable and subarray output power of 1MW photovoltaic system by the PSPICE modeling. As a result of simulation, we can proved that photovoltaic array output power is limitted by the resistance of cable.

• Structural Engineering and Mechanics
• /
• 제7권3호
• /
• pp.241-257
• /
• 1999

This paper presents a procedure to minimize the cost of materials of cable-stayed bridges with composite box girder and concrete tower. Two sets of iterations are included in the proposed procedure. The first set of iteration performs the structural analysis for a cable-stayed bridge. The second set of iteration performs the optimization process. The design is formulated as a general mathematical problem with the cost of the bridge as the objective function and bending forces, shear forces, fatigue stresses, buckling and deflection as constraints. The constraints are developed based on the Canadian National Standard CAN/CSA-S6-88. The finite element method is employed to perform the complicated nonlinear structural analysis of the cable-stayed bridges. The internal penalty function method is used in the optimization process. The limit states design method is used to determine the load capacity of the bridge. A computer program written in FORTRAN 77 is developed and its validity is verified by several practical-sized designs.

• 한국표면공학회지
• /
• 제54권2호
• /
• pp.84-89
• /
• 2021

The visual inspection method is widely used for corrosion damage analysis of steel plate due to the cost-efficient, fast and reasonably accurate results. However, visual inspection of corrosion deteriorated degree has a problem that the reliability of results differs depending on the inspector's individual knowledge and experience. In this study, we evaluated the degree of corrosion from a given image by using image segmentation method based on the grabcut and HSV(Hue, Saturation, Value) color image processing techniques for the development of an automatic inspection tool. The code written in Python based OpenCV-python libraries was used to categorize the images.

• 공학교육연구
• /
• 제22권4호
• /
• pp.12-21
• /
• 2019

This paper asserts to teach engineering writing while teaching cornerstone design as well as addresses its background of the assertion. Cornerstone design course in which students study what is engineering design and what is the design process by team activities provides suitable circumstance for them to learn technical writing for solving communication problems and to produce some language artifacts. Studying the process-based writing and making use of the written artifacts in the course of engineering design process boosts design thinking for developing creative design concepts and mediates problem solving communications among design stakeholder.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제18권6호
• /
• pp.319-332
• /
• 2018

The objective of this review was to investigate the efficacy of dental local anesthetics, as it is well known among clinicians that local anesthesia may be challenging in some circumstances. Therefore, the focus of this review was on the efficacy of the products used in dental local anesthesia. In a Pubmed database literature search conducted, a total of 8646 articles were found to be related to dental local anesthetics. After having applied the inclusion criteria (human research, performed in the last 10 years, written in English language, and focus on dental local anesthetics) and having assessed the quality of the papers, 30 were deemed eligible for inclusion in this review. The conclusion of this review is that none of the dental local anesthetic amides provide 100% anesthesia. The problem appears to be more pronounced when mandibular teeth are attempted to be anaesthetized and especially if there is irreversible pulpitis involved. The authors conclude that this finding suggest exploration of more efficient techniques to administer dental local anesthesia, especially in the mandible, to establish a 100% efficacy, is needed.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 춘계학술대회
• /
• pp.323-325
• /
• 2014

SNOMED CT는 임상 과정에서의 진료 기록을 전산화하고 이를 효율적으로 관리 및 활용하기 위한 종합적 표준 임상 의학용어 체계이다. 그러나 이는 표현 가능한 용어의 종류가 지나치게 많음에 따라 환자 상태를 표현하는 가장 적합한 용어를 짧은 진료 시간 내에 선택하여 기록하기가 어렵고, 또한 한가지 임상적 의미가 다양한 용어 및 그 조합으로 표현될 수 있음에 따라 의무기록의 작성시 그 의미가 왜곡되거나 잘못 해석될 여지가 발생한다. 본 연구에서는 이러한 문제점들을 분석하고 이를 해결하기 위한 중복 용어 선택 기법을 제시한다.