• Journal of Nutrition and Health
• /
• 제34권6호
• /
• pp.701-714
• /
• 2001

The purpose of this study was to apply a PERT-type system, a combination of the project evaluation and review technique(PERT) and critical path method(CPM) on the employees' work time management of flood preparation, assembly, transportation and cleaning in home-delivered meals program for elderly The resources allotment heuristic program was developed by considering the number of employees and cooking utilities, being limited resources of home- delivered meals program. This program could assign the employees to perform the works included in flood preparation, assembly, transportation ind cleaning. Critical path and activities ware identified by PERT-type system on the basic of work time investigation in five senior centers. Work sheets were invented to perform the work by the shortest path with flexible employees'maximum flow As a result of the work time investigation, the most prevalent activities were ones of preparation in center C and E. Besides, the preparation(over fifty percent) was the most proportion among flood preparation, assembly, transportation and cleaning in center C and E. Critical path and activities of 'C'center were cucumber in sauce preparation path and assembly, wrapping in assembly path and case delivery in transportation path. Critical path and activities of 'E'center were Pan-fried Potato Preparation Path and assembly, case covering, wrapping in assembly Path. The work sheet invented by the heuristic program and PERT-type system reduced the work completion time and man hours in both centers.

• 한국초전도ㆍ저온공학회논문지
• /
• 제7권2호
• /
• pp.21-26
• /
• 2005

Breakdown characteristics and survival probability of turn-to-turn models were investigated under ac and impulse voltage at 77K. For experiments, two test electrode models were fabricated: One is point contact model and the other is surface contact model. Both are made of copper wrapped by O.025mm thick polyimide film(Kapton). The experimental results were analyzed statistically using Weibull distribution in order to examine the wrapping number effects on voltage-time characteristics under ac voltage as well as under impulse voltage in LN$_{2}$. Also survival analysis were performed according to the Kaplan-Meier method. The breakdown voltages of surface contact model are lower than that of point contact model, because the contact area of surface contact model is wider than that of point contact model. Besides, the shape parameter of point contact model is a little bit larger than that of surface contact model. The time to breakdown t$_{50}$ is decreased as the applied voltage is increased, and the lifetime indices slightly are increased as the number of layers is increased. According to the increasing applied voltage and decreasing wrapping number, the survival probability is increased.

• 한국의류학회지
• /
• 제23권2호
• /
• pp.208-219
• /
• 1999

The costume style of Turfan had changed three times which were the period of peculiar style the period of Kochang style the period of influence of T'ang's culture. Before the founding of Kochang country the costume style of Turfan was two piece style. It was a character of nomadic people's clothes. Tops were tunic and caftan. The method of adjust caftan were two types. The one is wrapping toward left so the right edge of the top covers the left. The other is wrapping toward right. Bottoms were pants and skirts. This period was characterized by the traditional style. I called in it the period of peculiar style After the founding of Kochang country style as Kochang style. In this period Silkroad was so activated that cultural exchanges between many people and materials passed through Turfan. Turfan's culture soaked up the products of civilization of chinese and western Turkestan. Chinese and western Turkestan's costume influencd under the direct control of T' ang dynasty. Such an aspects were reflected the Trufan's costume. The Trucan's costume had changed into the foreign style that was the T'ang's costume. It was the period of influence of T'ang culture.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1993년도 학술논문발표회 논문집 제12권 1호
• /
• pp.121-124
• /
• 1993

This paper is a study on the word recognition using neural network. A limited vocabulary, speaker independent, isolated word recognition system has been built. This system recognizes isolated word without performing segmentation, phoneme identification, or dynamic time wrapping. It needs a static pattern approach to recognize a spatio-temporal pattern. The preprocessing only includes preceding and tailing silence removal, and word length determination. A LPC analysis is performed on each of 24 equally spaced frames. The PARCOR coefficients plus 3 other features from each frame is extracted. In order to simplify a structure of neural network, we composed binary code form to decrease output nodes.

• 한국생물환경조절학회:학술대회논문집
• /
• 한국생물환경조절학회 2007년도 춘계 학술대회 및 정기총회
• /
• pp.235-239
• /
• 2007

• 한국전자파학회논문지
• /
• 제28권4호
• /
• pp.318-327
• /
• 2017

능동위상배열안테나는 정밀한 빔의 형성과 성능 확인을 위해 근접전계 수신시험이 요구된다. 그에 따른 근접전계 수신시험을 통해 모노펄스 기능을 활용하기 위한 보상값을 획득하게 된다. 하지만, 많은 주파수 채널을 사용하는 레이다의 경우 많은 시간과 노력이 요구된다. 효율적인 레이다 개발과 생산을 위해서는 선택적으로 주파수 채널을 선정하고, 그 측정값을 기준으로 측정하지 않은 주파수 채널의 보상값을 보간법을 통해 예측하여 획득할 수 있다. 이와 같은 방법으로 보상값의 위상각 정보를 획득할 경우, 합, 차 채널간의 위상변화량을 확인할 필요성이 있다. 위상의 측정은 랩핑으로 인하여 비선형 현상이 나타날 수 있기 때문이다. 일반적인 레이다의 경우, 합, 차 채널의 전기적 길이가 유사하게 설계되지만, 특정 목적으로 전기적 길이 차이가 발생할 경우, 랩핑 현상으로 인해 보간법의 오류를 발생할 수 있다. 본 논문에서는 전기적 길이 차이에 의해 발생되는 보간법의 오류를 확인하고, 하나의 주파수 선택 방안을 제시한다.

• Composites Research
• /
• 제24권2호
• /
• pp.22-29
• /
• 2011

높은 내압을 받는 장축후육실린더의 성능향상을 위해 최근 그 길이가 길어짐에 따라 무게 또한 무시할 수 없는 변수로 떠오르게 되었다. 따라서 본 논문은 이러한 현상에 대처하기위한 대안으로 장축후육실린더의 무게를 줄이고 대신 복합재 테이프를 감아 무게감소와 더불어 벤딩 (bending)현상을 줄이기 위한 목적으로 복합재가 AISI4340 후육실린더에 미치는 영향을 살펴보았다. 우선 크기가 감소된 AISI4340 후육실린더에 높은 내압을 받는 압력용기 등에 주로 사용되는 자긴가공(autofrettage) 공법을 모사한 후 T300/S208, IM7/PETI5, IM7/8552 테이프를 적용하여 각각의 복합재가 AISI4340 후육실린더에 감을 때 발생되는 응력분포를 살펴봄으로써 탄성계수 및 적층각에 따른 영향을 고찰하였다. 또한 복합재IAISI4340 이중구조 후육실린더의 적층각 도출을 위한 다양한 적층각 조합용 통해 적층각 도출을 위한 전초를 마련하였다. 본 논문을 위한 해석에는 MSC.Nastran/Patran v.2005가 사용되었다.

• 한국정보과학회논문지:시스템및이론
• /
• 제31권10호
• /
• pp.593-602
• /
• 2004

정렬되지 않은 3차원 측정점들로부터 이들을 근사하는 표면을 재구성하는 방법을 제안하였다. 제안된 방법은 경계면 축소포장 방식에 의한 표면 재구성 방법(shrink-wrapped boundary face： SWBF) 으로, 측정점으로부터 경계셀과 경계면을 구해 초기 메쉬를 생성하고 이를 연속적으로 축소하는 방식에 의해 표면을 재구성한다. 제안된 방법은 기존의 표면 축소포장 방식의 메쉬 생성 방법의 문제점인 물체의 토폴로지에 대한 제약이 없이 어떠한 형태의 표면 재구성에도 적용이 가능하며, 기존 방법이 축소 단계에서 각 메쉬 정점에 대한 최단거리 측정점을 찾는 전역 탐색을 해야 하는데 비해 지역 탐색만으로 최적의 측정점을 찾을 수 있으므로 처리 시간 측면에서도 우월하다. 실험을 통해 제안된 표면 재구성 알고리즘이 측정점들간의 관계를 알 수 없는 정렬되지 않은 3차원 점들에 대한 표면 재구성에 매우 안정적이고 효과적임을 확인할 수 있었다.

• 농업과학연구
• /
• 제42권1호
• /
• pp.53-61
• /
• 2015

Development of highly efficient and energy-saving tractors has been one of the issues in agricultural machinery. For design of such tractors, measurement and analysis of load on major power transmission parts of the tractors are the most important pre-requisite tasks. Objective of this study was to perform pre-processing procedures before effective analysis of load data of agricultural tractors (30, 75, and 82 kW) during major field operations such as plow tillage, rotary tillage, baling, bale wrapping, and to select the suitable pre-processing method for the analysis. A load measurement systems, equipped in the tractors, were consisted of strain-gauge, encoder, hydraulic pressure, and radar speed sensors to measure torque and rotational speed levels of transmission input shaft, PTO shaft, and driving axle shafts, pressure of the hydraulic inlet line, and travel speed, respectively. The entire sensor data were collected at a 200-Hz rate. Plow tillage, rotary tillage, baling, wrapping, and loader operations were selected as major field operations of agricultural tractors. Same or different farm works and driving levels were set differently for each of the load measuring experiment. Before load data analysis, pre-processing procedures such as outlier removal, low-pass filtering, and data division were performed. Data beyond the scope of the measuring range of the sensors and the operating range of the power transmission parts were removed. Considering engine and PTO rotational speeds, frequency components greater than 90, 60, and 60 Hz cut off frequencies were low-pass filtered for plow tillage, rotary tillage, and baler operations, respectively. Measured load data were divided into five parts: driving, working, implement up, implement down, and turning. Results of the study would provide useful information for load characteristics of tractors on major field operations.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.450-450
• /
• 2000

This paper presents a software design simulation method for controlling multiple mechanism carrier system (MMCS), which is mainly used in a wrapping machine or a case packing machine. This method uses a mechanical tool-work interactive model proposed in this paper, in order to represent the interactive behaviors between some tools and a work driven by their tools, in which low effect states of a work are defined. Based on this method, a 3-D simulation system has been built. It consists of shape modeling of each device, behavior definitions of tools, and control logic using if-then expression. By applying it to a ase packing machine having about 30 mechanical devices and 100 inputs/outputs for control, the effectiveness of this method has been shown in general verification of control logic specification in an early software design phase and the possibility of smooth communication tool between mechanical and software designers.