• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.330-333
• /
• 2002

This study Presents improvement of Precision in the non-contacted laser application measuring techniques. The phase map of deformation obtained by phase shifting method in Electronic Speckle Pattern Interferometry displays the wrapped image by the arctangent function, which is a characteristic of 4-step phase shifting method. To obtain deformation distribution from the results, the wrapped phase map is processed by an unwrapping method. But a previous method cannot apply discontinuous object as like plate with a circular hole to obtain precious deformation distribution To solve this problem, new algorithm is developed and the result is compared with previous method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1784-1785
• /
• 2011

PS(Phase Shift) 방식을 이용하여 3차원 이미지 형상복원 시스템을 구현하였다. PS 방식은 위상을 이동시켜서 얻어진 강도를 arctan 시킴으로써 $-{\pi}{\sim}{\pi}$ 범위의 접혀진(wrapped) 위상을 얻을 수 있으며, 이러한 wrapped 위상을 위상 펼침(unwrapping) 알고리즘을 이용하여 불연속을 제거할 수 있다. 얻어진 위상 정보는 물체의 높이 정보에 비례하기 때문에 위상 분포로써 3차원 형상을 복원할 수 있다. Unwrapping 알고리즘에는 다양한 방식이 있지만 본 연구에서는 LabVIEW 프로그램을 이용하여 Goldstein 알고리즘을 구현하였으며, 감마(Gamma) 효과에 의한 노이즈를 줄이기 위하여 프로젝트와 카메라의 보정(calibration) 프로그램을 개발 및 적용하였다. 이와 같은 실험을 통하여 효과적으로 3차원 형상 정보를 얻을 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.143-146
• /
• 1987

Fiber optics provide a solution to the problems at interference, capacity and reliability in communication. Approximately 20 kilometera of a six-fiber, multimode, longwave($1.3{\mu}m$), graded index silica glass fiber optic cable was helically wrapped around a phase conductor at a Korea Electric Power Corporation(KEPCO) 154KV transmission line. This paper presents an economic comparison of several fiber optic cable installation alternative and discusses the characteristics at the helically wrapped fiber cable, as well as the entire installation, including high voltage phase-to-ground (PTG) end termination, and splicing. The fiber link was installed for the field trial and practical use with overhead composite optical fiber cable which installation performed a few years earlier some other location and is intended to accommodate not only telephone but also supervisory Control and Data Acquisition(SCADA), protective relaying, and telemetry functions.

• Advances in concrete construction
• /
• 제9권6호
• /
• pp.597-610
• /
• 2020

Stress-strain models of fibre reinforced polymer (FRP) confined concrete have been widely investigated; however, the existing load which is always supported by structures during the retrofitting phase, namely 'preload', has been neglected. Thus, preload effects should be clarified, providing insightful information for FRP retrofitting of structures with preload conditions. Towards this aim, experiments were performed for 27 cylinder concrete specimens with the diameter 150 mm and the height 300 mm. Three specimens were used to test the compressive strength of concrete to compute the preloads 20%, 30% and 40% of the average strength of these specimens. Other 24 specimens were divided into 2 groups; each group included 4 subgroups. Four subgroups were subjected to the above preloads and no preload, and were then wrapped by 2 FRP layers. Similar designation is applied to group 2, but wrapped by 3 FRP layers. All specimens were tested under axial compression to failure. Explosive failure is found to be the characteristic of specimens wrapped by FRP. Experimental results indicated that the preload decreases 12-13% the elastic and second stiffness of concrete specimens wrapped by 2 FRP layers. The stiffness reduction can be mitigated by the increase of FRP layers. Preload negligibly reduces the ultimate force and unclearly affects the ultimate displacement probably due to complicated cracks developed in concrete. A mechanism of preload effects is presented in the paper. Finally, to take into account preload effects, a modification of the widely used model of un-preload FRP confined concrete is proposed and the modified model demonstrated with a reasonable accuracy.

• 한국정보통신학회논문지
• /
• 제20권10호
• /
• pp.1973-1979
• /
• 2016

기술이 발전하면서 카메라를 통해 3D 측정을 하는 방법은 계속 발전되어왔고 최근에는 여러 주기의 fringe pattern을 이용한 측정 방법을 쓰고 있다. 본 논문에서는 여러 주기의 fringe pattern을 이용한 3D 측정 방법에 대한 기존 방법의 문제점을 제시하고, 이에 대한 해결 방안으로 기준면의 절대위상과 물체의 위상차를 이용한 물체의 절대위상을 구하는 방법을 제안한다. 이를 이용하면 새로운 물체에 대해서 매번 여러 주기의 fringe pattern을 조사하지 않고 물체의 절대위상을 얻을 수 있다. 따라서 제안하는 방법을 이용하면, 측정단계에서 취득하는 영상의 개수가 적기 때문에 보다 빠른 속도로 3D 측정을 할 수 있다. 실험을 통하여 제안하는 방법의 유용성을 보였다.

• Current Optics and Photonics
• /
• 제7권5호
• /
• pp.529-536
• /
• 2023

The Morlet wavelet transform method is proposed to analyze a single interferogram with spatial carrier frequency that is captured by an optical interferometer. The method can retain low frequency components that contain the phase information of a measured optical surface, and remove high frequency disturbances by wavelet decomposition and reconstruction. The key to retrieving the phases from the low-frequency wavelet components is to extract wavelet ridges by calculating the maximum value of the wavelet transform amplitude. Afterwards, the wrapped phases can be accurately solved by multiple iterative calculations on wavelet ridges. Finally, we can reconstruct the wave-front of the measured optical element by applying two-dimensional discrete cosine transform to those wrapped phases. Morlet wavelet transform does not need to remove the spatial carrier frequency components manually in the processing of interferogram analysis, but the step is necessary in the Fourier transform algorithm. So, the Morlet wavelet simplifies the process of the analysis of interference fringe patterns compared to Fourier transform. Consequently, wavelet transform is more suitable for automated programming analysis of interference fringes and avoiding the introduction of additional errors compared with Fourier transform.

• Journal of electromagnetic engineering and science
• /
• 제14권4호
• /
• pp.332-335
• /
• 2014

This paper investigates the phase singularity problem in microwave image reconstruction utilizing unwrapped phase data. The measured phases of the electric fields in most microwave measurement systems are wrapped. Thus, a certain phase unwrapping process is necessary for reconstruction of the image of a high contrast object. This unwrapping, however, is difficult in the presence of scattering nulls on/near the unwrapping path. At the null point, the phase value will be rendered, resulting in a poor image reconstruction. In this paper, we investigate the phase singularity arising from electromagnetic scattering nulls in microwave breast tomographic imaging. We then propose a transformation technique for the measured electric fields that avoids phase singularity.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1767_1768
• /
• 2009

4-step 알고리즘을 이용하여 3차원 이미지 위상 정보를 분석하였다. Carre(1966)에 의하여 제시된 위상 분석 기술은 위상이동에 대하여 설명하고 있다. Wyant(1982)에 의한 4-step 알고리즘은 수많은 PSI(Phase-Shift Interferometry)법[1] 중에서 가장 일반적인 내용이다. 그러나 실험장비 설치 시, 매우 어렵다는 단점이 있다. 실험 과정에서 물체의 3차원 형상을 얻기 위해 매우 간단히 실험 설치를 하였다. 간섭 패턴은 추가적인 렌즈, 거울, 모터와 같은 광학장비 없이 랩뷰 프로그램과 비젼 시스템을 사용하여 구축하였다. 4-step method와 컴퓨터 프로그램에 의해 생성된 unwrapping image에 의해 물체의 wrapped된 이미지를 얻었다. 실험에 의하여 얻어진 간섭패턴을 분석 함으로써, 웨이브 프론트, 강도 그래프, 3차원 형상, 상수 데이터와 같은 다양한 정보를 얻을 수 있었다.

• Journal of Mechanical Science and Technology
• /
• 제16권2호
• /
• pp.175-181
• /
• 2002

A new polariscope system involving two rotating optical elements and a digital camera for whole field fringe analysis allows automated data to be acquired quickly and efficiently. The developed phase measuring technique that uses eight images through a circular polariscope is presented for the digital measurement of isochromatics and isoclinics, respectively, from photoelastic fringes in a circular disk under diametric compression. Isochromatics can directly be obtained using wrapped isoclinic phases calculated by the arc tangent operator which is the four-quadrant operator from -$\pi$ to $\pi$. It is not required to unwrap isoclinic phases for the calculations of isochromatics. Unwrapped isoclinics are directly determined from isochromatic parameters. Distributions of digitally determined isoclinics are in close agreement to manual measurements. The errors which would appear in unwrapping process of isoclinics can be avoided in the determination of isochromatics.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 1998년도 가을 학술발표논문집 Vol.25 No.2 (2)
• /
• pp.414-416
• /
• 1998

페이즈를 계산하는 전통적인 방법인 역탄젠트로부터 계산된 페이즈는 불연속 속성을 갖는 wrapped페이즈이다. unwrapping과정을 거쳐 연속적인 함수로 표현되는 unwrapped페이즈는 linear요소와 local요소로 구성된다. 이 중 local요소가 표면결 분할에 유용하게 사용된다. local요소를 구하기 위해 linear요소를 찾아서 제거해야 하는 경우 먼저 linear요소를 구하는 방법이 제안되어야 한다. 본 논문는 필터의 방향에 제한을 두지 않고 어떠한 필터를 적용하더라도 linear요소를 구할 수 있는 새로운 계산법을 제안하였다.