• 보건행정학회지
• /
• 제9권4호
• /
• pp.87-119
• /
• 1999

The main purpose of this research is to measure and analyze how productive the health centers are and how much inputs(or outputs) in the inefficient health centers should be decreased(or increased) for efficiency. The evaluation of the performance of health centers gives a strong incentive to improve resource allocation in regional health planning. It has been, however, implemented very rarely until now. In this regard, this paper measures the performance of the health centers with a single indicator for multiple-outputs in terms of productivity(technical efficiency), based on Data Envelopment method. The 20 Kyungnam health centers which provide clinic services and specific primary health care services were analyzed. The results show that 50.0% of 20 health centers were productive with respective to overall technical efficiency, 65.0% were productive for pure technical efficiency, and 50.0% for scale efficiency. The inefficient group includes Geoje, Mahsan, Miryang, Sahchun, Tongyoung, Gosung, Nahmhae, Euryang, Hahmahn, Hahbchun health centers. The worst case was identified as Tongyoung health center which represented a 47.5% efficiency, compared with productive health centers. The empirical results for input-output analysis indicates that the low-productive health centers have excessive manpower in administration department, producing low outputs in clinical services and vaccination program. These findings imply that a systemic evaluation of the performance of the Korean health centers and the subsequent structural reform are strongly required.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2004년도 정기학술대회
• /
• pp.303-311
• /
• 2004

This paper presents the reliability estimation of door hinge for home appliances, which consists of bushing and shaft. The predominant failure mechanism of bushing made of polyoxymethylene(POM) is brittle fracture due to decrease of strength caused by voids existing, and that of shaft made of acrylonitrile-butadiene-styrene(ABS) is creep due to plastic deformation caused by excessive temperature and lowering of glass transition temperature by absorbed moisture. Since the brittle fracture of bushing is overstress failure mechanism, the load-strength interference model is used to estimate the failure rate of it along with failure analysis. By the way, the creep of shaft is wearout failure mechanism, and an accelerated life test is then planned and implemented to estimate its lifetime. Through the technical review about failure mechanism, temperature and humidity are selected as accelerating variables. Assuming Weibull lifetime distribution and Eyring model, the life-stress relationship and acceleration factor, B$_{10}$ life and its lower bound with 90% confidence at worst case use condition are estimated by analyzing the accelerated life test data.a.

• 한국주거학회논문집
• /
• 제17권2호
• /
• pp.77-85
• /
• 2006

This study aims to propose the comprehensive evaluation of performance multi-family housing. Most of the existing studies for the reproduction have evaluated by the safety of structure. Therefore those pass over the functional factors which is important for the evaluation of residential qualities. This study represents that the reproduction renovation should not be secured the safety of structure but established the quality of lift. And questionnaire asking expert's opinion also supplemented. As a result, the item for examination and the weight for evaluation are suggested in functional deterioration. The results of this study are summarized as follows: 1. Existent redevelopment criteria are not appropriate to decide the environmental comfort, the vital function of housing and the residential management finance. 2. The future criteria have to evaluate the existing environmental comfort, be reconstructed to put first general deterioration. 3. Evaluation elements was extracted throughout the document research, evaluation elements analysis system was separated in residential area, suburb of dwellings, community, and housing complexity environmental assesment, 4. Each category of influence ratio was extracted to assess total deterioration throughout the expert question survey. 5. Each category analysed (1) $0{\sim}30%$: function is good (unnecessary to improve) (2) $31{\sim}40%$: average (necessary of partial improvement) (3) $41{\sim}59%$: bad (necessary of total improvement) (4) $60{\sim}100%$: the worst (unable to improve throughout the repair)

• 반도체디스플레이기술학회지
• /
• 제19권1호
• /
• pp.42-48
• /
• 2020

As global warming accelerates, eco-friendly electric cars are being developed to reduce carbon dioxide emissions, and power conversion inverters are used to drive motors. Among inverter components, DC-link capacitor is heated by high current usage, which causes problems such as performance and life-saving of inverter. Although metal cases with good thermal performance have been used to solve this problem, it is difficult to apply them in practice due to insulation problems with other parts. In this paper, the Heat-Generation influence factor of DC-link capacitor is analyzed. Variables on heat-generation are set at 3 levels for film width, inductance, and film thickness. Box-Behnken to 13 tests using the design and minimal deviations, e.g. through the experiment three times by each level. The surface of the film k type by attaching the sensor current is measured temperature. Capacitance was set to a minimum level of 200 ㎌ and had a frequency of 16 kHz with Worst case, ambient temperature of 85℃ and a ripple current of 50 Ams was applied. The temperature at the measurement point was collected in the data logger after sampling at 1 minute intervals for 2 hours after saturation with the ambient temperature. This experiment confirmed that setup factors are correlated with heat-generation.

• 한국농공학회지
• /
• 제40권1호
• /
• pp.49-56
• /
• 1998

Ths study was peformed to evaluate the degree of degradation and safety of a small agricultural reservoir, Kosam Reservoir, in Kyungki Province. Evaluation was done by the program developed by the authors. Results of the study are as follows: 1) Although many burrows were found in downstream side of embankment and cracks were found in wall joining spillway, it appeared that degree of degradation of embankment was in good conditions. 2) Compressive strengths of concrete of crest, side channel, chute floor of spillway were in poor condition. But it appeared that overall degree of degradation of structures was in medium condition based on the criteria of the evaluation system 3) From the analysis of slope stability, safety factor of downstream slope was over 3.3 for the worst condition, such as flood and high water level and that of upstream slope was also over 3.6 for rapid drawdown. In case of earthquake, safety factors were over 2.5 for all conditions. Therefore embankment slopes of Kosam Reservoir were very stable for normal and earthquake condition. 4) As upon assumed failure of embankment of Kosam Reservoir, degree of damage was estimated to be very serious because of many loss of life and properties in the downstream area. 5) Overall grade of safety of Kosam Reservoir was in good condition. Therefore safety was considered to be "No problems" at the present time but further degradation may be proceeded partly and continuously as time goes by.e goes by.

• 대한전자공학회논문지SD
• /
• 제37권8호
• /
• pp.67-75
• /
• 2000

본 논문에서는 광학적 Hough변환(HT) 결과로부터 입력영상에 존재하는 타원의 정보를 찾는 새로운 방법을 제안하였다. 제안된 방법은 일반화된 타원 수식을 직선에 대한 HT 수식에 대입해서 타원에 대한 포락선 방정식을 구한 후, 포락선의 정보를 이용해 타원을 찾는데 필요한 다섯 개의 변수들을 수식적으로 유도하였다. 제안된 방법을 사용하여 최악의 경우에도 약 94%의 정확도로 타원의 정보를 추출할 수 있음을 컴퓨터 시뮬레이션을 통하여 확인 하였다. 시뮬레이션 결과와 실험 결과를 비교하기 위하여 HT 컴퓨터형성홀로그림(CGH) 필터를 사용하여 광학적 실험을 수행하였다. 실험을 통하여 광학적HT 결과가 이론적인 시뮬레이션 결과와 유사함을 확인하였다.

• 한국정보처리학회논문지
• /
• 제1권3호
• /
• pp.357-366
• /
• 1994

IEEE 802.4 토큰버스 방식이 산업용 네트워크에 있어서 표준으로 넓게 받아들여지 고 있다. 802.4에서는 정보의 교환을 제어하기 위해 일종의 타이머를 사용하여 트래 픽의 다중 클래스를 지원한다. 실시간 처리를 위한 802.4 기능의 시간 할당방법은 실제 생산 공정에서 요구되는 실시간 제어응용에서 최악의 상태 억세스 요구를 만족하 도록 타이머들이 설정되어야 한다. 물론 시간에 제약을 받지 않은 다른 응용들도 동시 에 지원될 수 있다. 본 논문에서는 실시간 처리를 위하여 토큰 버스 네트워크 운영시 타이머 할당 구조에 따른 최소한의 대역폭 할당을 위하여 알고리즘을 제안하고 해석 적 방법과 이의 시뮬레이션을 수행하여 타이머 할당과 유용도 산출에 대한 성능을 해 석하였다.

• 대한임베디드공학회논문지
• /
• 제8권5호
• /
• pp.285-293
• /
• 2013

The procedure of the arbitration which is the tag collision is essential because the multiple tags response simultaneously in the same frequency to the request of the Reader. This procedure is known as Anti-collision and it is a key technology in the RFID system. In this paper, we propose the Bit Pattern Prediction Algorithm(BPPA) for the efficient identification of the multiple tags. The BPPA is based on the tree algorithm using the time slot and identify the tag quickly and efficiently using accurate bit pattern prediction method. Through mathematical performance analysis, We proved that the BPPA is an O(n) algorithm by analyzing the worst-case time complexity and the BPPA's performance is improved compared to existing algorithms. Through MATLAB simulation experiments, we verified that the BPPA require the average 1.2 times query per one tag identification and the BPPA ensure stable performance regardless of the number of the tags.

• Nuclear Engineering and Technology
• /
• 제25권1호
• /
• pp.63-70
• /
• 1993

암반동굴 타입의 저준위방사성폐기물 처분장의 보수적인 안전성평가를 처분장 선원항 REPS 모델을 사용하여 수행하였다. 신뢰할만한 핵종별 침출율 예측을 위하여 REPS 모델에서 콘크리트 구조물의 열하시간, 부석의 형태와 부식율. 드럼표면의 부식면적 비, 그리고 핵종의 특성등이 고려되고 있다. 예비평가의 결과로 Cs-137, Ni-63, Sr-90등이 주요한 핵종임을 알 수 있다. 파라메타의 불확실성과 민감도분석을 위하여 라틴하이퍼큐브 샘플링과 Rank Correlation 기법이 사용되었다. 침입자 시나리오를 적용하였을 경우의 예상 피폭선량도 허용치 이하임과 처분장의 환경영향평가에 있어서 비교적 불확실성이 적은 Near Field의 중요성에 대한 인식이 새롭게 강조되어야 할 필요가 있음을 알 수 있었다.

• Journal of Communications and Networks
• /
• 제6권2호
• /
• pp.93-105
• /
• 2004

This paper discusses cyclostationary interference suppression for multiuser wired communication systems. Crosstalk interference from digital signals in multipair cables has been shown to be cyclostationary. Many crosstalk equalization or suppression techniques have been proposed which make implicit use of the cyclostationarity of the crosstalk interferer. In this paper, the convergence and steady-state behaviors of a fractionally spaced equalizer (FSE) in the presence of multiple cyclostationary crosstalk interference are thoroughly analyzed by using the equalizer's eigenstructure. The eigenvalues with multiple cyclostationary interference depend upon the folded signal and interferer power spectra, the cross power spectrum between the signal and the interferer, and tile cross power spectrum between the interferers, which results in significantly different initial convergence and steady-state behaviors as compared to the stationary noise case. The performance of the equalizer varies depending on the relative clock phase of the symbol clocks used by the signal and multiple interferers. Measued characteristics as well as analytical model of NEXT/FEXT channel are used to compute the optimum and worst relative clock phases among the signal and multiple interferers.