• Journal of Computing Science and Engineering
• /
• v.7 no.1
• /
• pp.53-66
• /
• 2013

Bounding the worst-case DRAM performance for a real-time application is a challenging problem that is critical for computing worst-case execution time (WCET), especially for multicore processors, where the DRAM memory is usually shared by all of the cores. Typically, DRAM commands from consecutive DRAM accesses can be pipelined on DRAM devices according to the spatial locality of the data fetched by them. By considering the effect of DRAM command pipelining, we propose a basic approach to bounding the worst-case DRAM performance. An enhanced approach is proposed to reduce the overestimation from the invalid DRAM access sequences by checking the timing order of the co-running applications on a dual-core processor. Compared with the conservative approach, which assumes that no DRAM command pipelining exists, our experimental results show that the basic approach can bound the WCET more tightly, by 15.73% on average. The experimental results also indicate that the enhanced approach can further improve the tightness of WCET by 4.23% on average as compared to the basic approach.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.6
• /
• pp.445-453
• /
• 2016

Fixed robust routing is attracting attention as routing that achieves high robustness against changes in traffic patterns without conducting traffic measurement and performing dynamic route changes. Fixed robust routing minimizes the worst-case maximum link load by distributing traffic of every source-destination (s-d) router pair onto multiple candidate paths (multipath routing). Multipath routing, however, can result in performance degradation of Transmission Control Protocol (TCP) because of frequent out-of-order packet arrivals. In this paper, we first investigate the influence of multipath routing on TCP performance under fixed robust routing with a simulation using ns-2. The simulation results clarify that TCP throughput greatly degrades with multipath routing. We next propose a candidate path selection method to improve TCP throughput while suppressing the worst-case maximum link load to less than the allowed level under fixed robust routing. The method selects a single candidate path for each of a predetermined ratio of s-d router pairs in order to avoid TCP performance degradation, and it selects multiple candidate paths for each of the other router pairs in order to suppress the worst-case maximum link load. Numerical examples show that, provided the worst-case maximum link load is less than 1.0, our proposed method achieves about six times the TCP throughput as the original fixed robust routing.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.6 s.44
• /
• pp.113-123
• /
• 2006

Flash memory has been increasingly used in handhold devices not only for data storage, but also for code storage. Because NAND flash memory only provides sequential access feature, a traditionally accepted solution to execute the program from NAND flash memory is shadowing. But, shadowing has significant drawbacks increasing a booting time of the system and consuming severe DRAM space. Demand paging has obtained significant attention for program execution from NAND flash memory. But. one of the issues is that there has been no effort to bound demand paging cost in flash memory and to analyze the worst case performance of demand paging. For the worst case timing analysis of programs running from NAND flash memory. the worst case demand paging costs should be estimated. In this paper, we propose two different WCRT analysis methods considering demand paging costs, DP-Pessimistic and DP-Accurate, depending on the accuracy and the complexity of analysis. Also, we compare the accuracy butween DP-Pessimistic and DP-Accurate by using the simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.8
• /
• pp.644-649
• /
• 2013

For effective DC-free coding in the optical storage systems, the Guided Scrambling algorithm is widely used. To reduce digital discrepancy of the coded sequence, functions of digital sum value (DSV) are used as criteria to choose the best candidate. Among these criteria, the minimum digital sum value (MDSV), minium squared weight (MSW), and minimum threshold overrun (MTO) are popular methods for effective DC-suppression. In this paper, we formulate integer programming models that are equivalent to MDSV, MSW, and MTO GS coding. Incorporating the MDSV integer programming model in MaxMin setting, we develop an integer programming model that computes the worst case MDSV bound given scrambling polynomial and control bit size. In the simulation, we compared the worst case MDSV bound for different scrambling polynomial and control bit sizes. We find that careful selection of scrambling polynomial and control bit size are important factor to guarantee the worst case MDSV performance.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_4
• /
• pp.1267-1276
• /
• 2020

To quantitatively predict the impacts of large-scale volcanic eruptions of Mt. Baekdu on air quality and damage around the Korean Peninsula, a three-dimensional chemistry-transport modeling system (Weather Research & Forecasting - Sparse Matrix Operation Kernel Emission - Comunity Multi-scale Air Quality) was adopted. A worst-case meteorology scenario was selected to estimate the direct impact on Korea. This study applied the typical worst-case scenarios that are likely to cause significant damage to Korea among worst-case volcanic eruptions of Mt. Baekdu in the past decade (2005~2014) and assumed a massive VEI 4 volcanic eruption on May 16, 2012, to analyze the concentration of PM_2.5 caused by the volcanic eruption. The effects of air quality in each region-cities, counties, boroughs-were estimated, and vulnerable areas were derived by conducting an exposure assessment reflecting vulnerable groups. Moreover, the effects of cities, counties, and boroughs were analyzed with a high-resolution scale (9 km × 9 km) to derive vulnerable areas within the regions. As a result of analyzing the typical worst-case volcanic eruptions of Mt. Baekdu, a discrepancy was shown in areas between high PM_2.5 concentration, high population density, and where vulnerable groups are concentrated. From the result, PM_2.5 peak concentration was about 24,547 ㎍/㎥, which is estimated to be a more serious situation than the eruption of Mt. St. Helensin 1980, which is known for 540 million tons of volcanic ash. Paju, Gimpo, Goyang, Ganghwa, Sancheong, Hadong showed to have a high PM_2.5 concentration. Paju appeared to be the most vulnerable area from the exposure assessment. While areas estimated with a high concentration of air pollutants are important, it is also necessary to develop plans and measures considering densely populated areas or areas with high concentrations of susceptible population or vulnerable groups. Also, establishing measures for each vulnerable area by selecting high concentration areas within cities, counties, and boroughs rather than establishing uniform measures for all regions is needed. This study will provide the foundation for developing the standards for disaster declaration and preemptive response systems for volcanic eruptions.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.5
• /
• pp.506-517
• /
• 2000

In distributed real-time system, a task activated by the completion of its preceding task can be modeled as a periodic task with activation jitter. An activation jitter of a task is defined asthe difference between the worst case and the best case response time of its preceding task. Becausethe existing approaches assume that the best case response time is much smaller than the actual one,the activation jitter and the worst case response time of lower priority tasks are overestimated. Thispaper proposes a new analysis technique to calculate the best case response time more precisely andto reduce the activation jitter bounds. The proposed technique obtains the best case response time byconsidering the relative phase between tasks. The precise analysis of the activation jitters can reducethe worst case response time of other tasks and increase the schedulability. The simulation resultsshow that the proposed analysis technique improves the accuracy of the best case and the worst caseresponse time up to 40% and 6%, respectively.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.1
• /
• pp.117-124
• /
• 2003

Thermal design fur satellite propulsion system has been performed. Overall design requirements and the constitution for propulsion system is described. To meet the thermal design requirements, both a primary and a redundant heater circuit, each with two thermostats placed in series, will protect each hydrazine-wetted components, even if one heater circuit fails to operate. Heater power is turned off if any one of these thermostats is opened at its higher setpoint. Thus, even if one thermostat is failed closed, the second thermostat will turn off the heater. All such components shall be insulated with MLI. Propulsion heater sizing based on the constant worst cold case condition is conducted through thermal analysis. All heaters selected fur propulsion components operate to prevent propellant freezing satisfying the thermal requirements for the propulsion subsystem over the worst case average voltage, i.e. 25 volts.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.151-154
• /
• 2003

In this paper, we described a method to guarantee a real-time communication in the hetegeneous network for the personal robot. The hetegeneous network is composed of many kinds of network like IEEE1394, Ethernet, CAN, Bluetooth, Wireless Lan and so on. real-time data is transfered via those kinds of network. Those network have different characteristics as speed, bandwidth, Priority. we used IEEE1394, Ethernet, CAN to study in this paper. To guarantee a real-time communication, a worst case response time must be scalable. In this environment to guarantee a real-time communication, we get a worst case response time of each network and a end-to-end worst case response time.

• Journal of Computing Science and Engineering
• /
• v.9 no.4
• /
• pp.177-189
• /
• 2015

High-performance processors using Non-Uniform Cache Architecture (NUCA) are increasingly used to deal with the growing wire delays in multicore/manycore processors. Due to the convergence of high-performance computing with embedded computing, NUCA caches are expected to benefit high-end embedded systems as well. However, for real-time systems that use multicore processors with NUCA caches, it is crucial to bound worst-case execution time (WCET) accurately and safely. In this paper, we developed a WCET analysis approach by considering the effect of static NUCA caches on WCET. We compared the WCET in real-time applications with different topologies of static NUCA caches. Our experimental results demonstrated that the static NUCA cache could improve the worst-case performance of realtime applications using multicore processor compared to the cache with uniform access time.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.77-82
• /
• 2001

Thermal design for KOMPSAT-2 propulsion system has been performed. Overall design requirements and the constitution for propulsion system is described. To meet the thermal design requirements, both a primary and a redundant heater circuit, each with two thermostats placed in series, will protect each hydrazine-wetted components, even if one heater circuit fails to operate. Heater power is turned off if any one of these thermostats is opened at its higher setpoint. Thus, even if one thermostat is failed closed, the second thermostat will turn off the heater. All such components shall be insulated with MLI. Propulsion heater sizing based on the constant worst cold case condition is conducted through thermal analysis. All heaters selected for propulsion components operate to prevent propellant freezing satisfying the thermal requirements for the propulsion subsystem over the worst case average voltage, i.e. 25 volts.